| Identification | More | [Name]
PHENYLSELENOL | [CAS]
645-96-5 | [Synonyms]
BENZENESELENOL
HYDROSELENOBENZENE
PHENYLSELENOL
SELENOPHENOL
Benzene, selenyl-
Phenol, seleno-
Selenylbenzene
Benzeneselenol~Selenophenol
Phenylselenol,90+%
Phenylselenol,97% | [EINECS(EC#)]
211-457-2 | [Molecular Formula]
C6H6Se | [MDL Number]
MFCD00000001 | [Molecular Weight]
157.07 | [MOL File]
645-96-5.mol |
| Chemical Properties | Back Directory | [Appearance]
clear yellow liquid | [Boiling point ]
71-72 °C/18 mmHg (lit.) | [density ]
1.479 g/mL at 25 °C(lit.)
| [refractive index ]
n20/D 1.616(lit.)
| [Fp ]
158 °F
| [form ]
liquid
| [pka]
4.73±0.70(Predicted) | [color ]
gold-yellow
| [Water Solubility ]
Not miscible or difficult to mix in water. | [Sensitive ]
Air Sensitive | [BRN ]
385715 | [CAS DataBase Reference]
645-96-5(CAS DataBase Reference) | [EPA Substance Registry System]
Benzeneselenol (645-96-5) |
| Safety Data | Back Directory | [Hazard Codes ]
T,N | [Risk Statements ]
R23/25:Toxic by inhalation and if swallowed .
R33:Danger of cumulative effects.
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment . | [Safety Statements ]
S20/21:When using, do not eat, drink or smoke .
S28:After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer) .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S60:This material and/or its container must be disposed of as hazardous waste .
S61:Avoid release to the environment. Refer to special instructions safety data sheet . | [RIDADR ]
UN 2810 6.1/PG 2
| [WGK Germany ]
3
| [F ]
10-23 | [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
II | [HS Code ]
29319090 |
| Hazard Information | Back Directory | [Chemical Properties]
clear yellow liquid | [Uses]
Benzeneselenol may be used as starting reagent in the synthesis of monoseleno-substituted 1,3-dienes. It may be used in the synthesis of cationic chalcogenolato-bridged diruthenium complexes. | [Uses]
It is applied for reactions of phenylselenol and its anion. Benzeneselenol can used as starting reagent in the synthesis of monoseleno-substituted 1,3-dienes. It may be used in the synthesis of cationic chalcogenolato-bridged diruthenium complexes. | [General Description]
Benzeneselenol is an aryl selenol. Diphenyl diselenide-promoted radical addition of benzeneselenol to inactivated acetylenes upon irradiation through Pyrex with a tungsten lamp has been reported. Catalysis of stannane-mediated radical chain reactions by benzeneselenol, generated in situ by reduction of diphenyl diselenide with tributyltin hydride, has been reported. | [Purification Methods]
Dissolve it in aqueous N NaOH, acidify this with conc HCl and extract with Et2O, dry over CaCl2, filter, evaporate on a steam bath and distil the residue from a Claisen flask or through a short column collecting the middle fraction, and seal immediately in a glass vial, otherwise the colourless liquid becomes yellow. The alkali insoluble materials consist of diphenylselenide (b 167o/16mm) and diphenyldiselenide, m 63o (from EtOH). TOXIC, use rubber gloves. It has a foul odour. [Foster Org Synth Coll Vol III 771 1955, Beilstein 6 III 1104, 1110, 6 IV 1777.] |
|
| Company Name: |
INTATRADE GmbH
|
| Tel: |
+49 3493/605464 |
| Website: |
www.intatrade.de |
|