| Identification | More | [Name]
Sodium thiosulfate | [CAS]
7772-98-7 | [Synonyms]
ANTICHLOR
BETZ 0235
DECHLORINATING SOLUTION
HYPO
'HYPO'
SODIUM HYPOSULFITE
SODIUM THIOSULFATE
SODIUM THIOSULFATE, 2.00 N
SODIUM THIOSULPHATE
SODIUN THIOSULFATE
SULFITE STANDARD
chlorinecontrol
chlorinecure
declor-it
disodiumthiosulfate
s-hydril
sodiumoxidesulfide(na2s2o3)
Sodiumthiosulfate,anhydrous
sodiumthiosulfateanhydrous
sodiumthiosulphate(na2s2o3) | [EINECS(EC#)]
231-867-5 | [Molecular Formula]
Na2O3S2 | [MDL Number]
MFCD00003499 | [Molecular Weight]
158.11 | [MOL File]
7772-98-7.mol |
| Chemical Properties | Back Directory | [Appearance]
White powder | [Melting point ]
48°C | [Boiling point ]
100°C | [density ]
1.01 g/mL at 25 °C
| [storage temp. ]
2-8°C
| [solubility ]
Immiscible with alcohol. | [form ]
Solid | [color ]
White | [Specific Gravity]
1.667 | [PH]
6.0-8.5 (25℃, 50mg/mL in H2O) | [Stability:]
Stable. Incompatible with strong acids, strong oxidizing agents, iodine, mercury. | [Water Solubility ]
Soluble in water. Insoluble in alcohol. | [Sensitive ]
Hygroscopic | [Merck ]
14,8694 | [InChIKey]
AKHNMLFCWUSKQB-UHFFFAOYSA-L | [LogP]
-0.428 (est) | [Uses]
Sodium thiosulfate (thiosulfate) Known simply as “hypo,” an abbreviated form of the incorrect
form hyposulfite, this white crystal was made by boiling
calcium thiosulfate with sodium sulfate. It is soluble in water
and oil of turpentine but not in alcohol. The property of
sodium thiosulfate to dissolve silver halides was discovered
in 1819 by Sir John Herschel and was probably first used to
fix photographic images by L. J. M. Daguerre. After Daguerre
published its use in his 1839 manual W. H. F. Talbot finally
used it to fix calotype negatives and silver chloride prints,
although he continued to stabilize them with potassium iodide
and sodium chloride presumably for the variety of colors
possible. Sodium thiosulfate was the primary fixing agent
throughout the 19th century and is still used today. | [CAS DataBase Reference]
7772-98-7(CAS DataBase Reference) | [EPA Substance Registry System]
7772-98-7(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
Xi | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S24/25:Avoid contact with skin and eyes .
S23:Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer) .
S36:Wear suitable protective clothing .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . | [WGK Germany ]
1
| [RTECS ]
XN6476000
| [F ]
3 | [TSCA ]
Yes | [HS Code ]
28323000 | [Safety Profile]
Moderately toxic by subcutaneous route. Incompatible with metal nitrates, sodium nitrite. When heated to decomposition it emits very toxic fumes of Na2O and SOx. See also SODIUM THIOSULFATE and SODIUM THIOSULFATE, PENTAHYDRATE. | [Hazardous Substances Data]
7772-98-7(Hazardous Substances Data) | [Toxicity]
LD50 orally in Rabbit: > 5000 mg/kg |
| Raw materials And Preparation Products | Back Directory | [Raw materials]
Sodium hydroxide-->Hydrochloric acid-->Sulfuric acid-->Sodium carbonate-->Sulfur-->Sodium sulfite-->Sodium sulfide-->Activated carbon-->Sulfur dioxide-->Sulphur-->Sodium thiosulfate pentahydrate-->Vanadium(V) oxide-->Potassium sodium tartrate-->BARIUM SULFIDE-->Sulphur Black 1 | [Preparation Products]
1-TERT-BUTYL-3-(TRIFLUOROMETHYL)-1H-PYRAZOLE-4-CARBOXYLIC ACID-->3-NITROPHENYLMETHANESULFONYL CHLORIDE-->1-(3-AMINO-2-CHLORO-PYRIDIN-4-YL)-ETHANONE-->4-(N,N-DIMETHYLAMINOSULFONYL)-7-FLUORO-2,1,3-BENZOXADIAZOLE-->Bromoform-->4-(HYDROXYMETHYL)PICOLINITRILE-->(4-CHLORO-PHENYL)-METHANESULFONYL CHLORIDE-->1-(3-AMINO-PYRIDIN-4-YL)-ETHANONE-->4-Fluorothiophenol-->2-Bromo-4-pyridinecarboxaldehyde-->Cartap-->S-METHYL-S-(2-THIAZYL) SULFOXIMINE-->S-METHYL-S-(4-HYDROXYPHENYL) SULFOXIMINE-->S-METHYL-S-(5-METHYLFURAN-2-YL) SULFOXIMINE-->1-Adamantanol-->1-TERT-BUTYL-4-BROMO-3-(TRIFLUOROMETHYL)-1H-PYRAZOLE-->S-METHYL-S-(4-METHOXYPHENYL) SULFOXIMINE-->S-METHYL-S-(4-FLUOROPHENYL) SULFOXIMINE-->4-BROMO-1-METHYL-3-(TRIFLUOROMETHYL)-1H-PYRAZOLE-->S-ETHYL-S-PHENYL SULFOXIMINE-->S-METHYL-S-(4-METHYLPHENYL) SULFOXIMINE-->S-METHYL-S-(4-CHLOROPHENYL) SULFOXIMINE-->S-METHYL-S-(2-FLUOROYPHENYL) SULFOXIMINE-->S-METHYL-S-(3-ACETAMIDOPHENYL) SULFOXIMINE-->3-CHLORO-4-IODONITROBENZENE-->4-[4-(BROMOMETHYL)PHENYL]-1,2,3-THIADIAZOLE-->4-(CHLOROSULFONYL)-7-FLUORO-2,1,3-BENZOXADIAZOLE-->4-Bromo-2-fluorobenzonitrile-->1-Iodonaphthalene-->4-FLUORO-2,1,3-BENZOXADIAZOLE-->3-Bromo-1-benzothiophene-->2,5-Dibromo-3-nitropyridine-->3-Iodopyridine-->3,5-DIBROMO-2-HYDROXY-4-METHOXYBENZALDEHYDE-->IODOCYCLOHEXANE-->DIMETHYL BROMOMALONATE-->3-FLUORO-2-IODOPYRIDINE-4-CARBOXYLIC ACID-->1,3-Dibromo-2-propanol-->Allicin |
| Hazard Information | Back Directory | [Hazard]
Use in foods restricted to 0.1%.
| [Definition]
ChEBI: An inorganic sodium salt composed of sodium and thiosulfate ions in a 2:1 ratio. | [Brand name]
Sulfactol (Sterling Winthrop). | [General Description]
Sodium thiosulfate (Na2S2O3) can be obtained from Na2S2O3.10H2O by heating above 100 °C. It can be synthesized from sodium sulfate. | [Veterinary Drugs and Treatments]
Sodium thiosulfate (alone or in combination with sodium nitrite)
is useful in the treatment of cyanide toxicity. It has been touted for
use in treating arsenic or other heavy metal poisonings, but its efficacy
is in question for these purposes. However, because sodium
thiosulfate is relatively non-toxic and inexpensive, it may be tried
to treat arsenic poisoning. When used in combination with sodium
molybdate, sodium thiosulfate may be useful for the treatment of
copper poisoning.
Sodium thiosulfate may be useful for the topical treatment for
some fungal infections (Tinea). In humans, sodium thiosulfate has
been used to reduce the nephrotoxicity of cisplatin therapy. A 3 or
4% solution has been used to infiltrate the site of extravasations of
cisplatin, carboplatin, or dactinomycin. In combination with steroids,
sodium thiosulfate may reduce the healing time associated
with doxorubicin extravasation. | [Purification Methods]
Crystallise it from EtOH/H2O solutions or from water (0.3mL/g) below 60o by cooling to 0o, and dry it at 35o over P2O5 under vacuum. [Foerster & Mommsen Chem Ber 57 258 1924.] This salt is used as a secondary standard in volumetric analysis [Kilpatrick J Am Chem Soc 45 2132 1923], and is used as “Hypo” in photography [Hargreaves & Dunningham J Soc Chem Ind 42 147T 1923.] |
| Questions And Answer | Back Directory | [Description]
Sodium thiosulfate is a commonly used chemical material, as the fixing agent in photography, film and printing plate-making industry, as a reducing agent used in tanning. It is used as a bleaching agent for removing residual and a mordant in the paper and textile industries, as antidotes of cyanide poisoning in medicine, as dechlorination agent and fungicides of drinking water and wastewater in water treatment, as a copper corrosion inhibitor of circulating cooling water and a deoxidizer of boiler water systems. It is also used for Cyanide wastewater treatment. Soda ash and sulfur are generally used as raw materials in industry, soda ash reacts with sulfur dioxide produced by the combustion of sulfur to produce sodium sulfite, then add sulfur for boiling reactions, and then filter, bleach, concentrate and crystallize, etc, can obtain sodium thiosulfate pentahydrate. Other production waste containing sodium sulfide, sodium sulfite, sulfur and sodium hydroxide can also be used, after appropriate treatment to get the product.
The above information is edited by Yan Yanyong of Chemicalbook.
| [Physical properties]
Sodium thiosulfate has two forms as anhydrous sodium thiosulfate (Na2S2O3) and sodium thiosulfate pentahydrate (Na2S2O3 · 5H2O), the latter is also known as soda and Hyperion. A molecular weight is 158.11 and 248.18 respectively. Anhydrous sodium thiosulfate is an opaque crystalline powder. The relative density is 1.667. It is odorless, salty taste, soluble in water, insoluble in ethanol. It decomposes in acidic solution, has a strong reduction, easily absorbs moisture. Sodium thiosulfate pentahydrate is odorless, colorless and transparent monoclinic crystals or granules. The relative density is 1.685. The melting point is 48 ℃. It loses all crystal water at 100 ℃, and decomposes above 100 ℃. It is easily weathered in dry and hot air, slightly deliquescence in the hot and humid air. It is soluble in water and turpentine, insoluble in ethanol, decomposes in case of strong acid. Prolonged exposure in the air, it is easily oxidated and carbonized by oxygen and carbon dioxide.
| [Chemical Properties]
It is colorless monoclinic crystal or white crystalline powder, Odorless, salty ignorant. The relative density is 1.667. Soluble in water, the solubility is 231 g/100 ml of water at 100 ℃. Insoluble in alcohol. deliquescence easily in air. With a strong reductibility, decomposition in acidic solution.
| [Reactions]
With reductibility, sodium thiosulfate is a medium strength reducing agent, for example, can be oxidated by chlorine:
Na2S2O3 + 4Cl2 + 5H2O = Na2SO4 + H2SO4 + 8HCl
this reaction is used in textile and paper industries, and sodium thiosulfate is used as dechlorination agent. Again, it can be oxidized to sodium tetrathionate by iodine:
Na2S2O3 + I2 = Na2S4O6 + 2Nal
this reaction is used in analytical chemistry for quantitative determination of iodine.
It is also used in tanning, extracts silver from the ore and so on. Since there are different oxidation states of sulfur in sodium thiosulfate molecule, it is stable in alkaline medium, unstable an acidic medium, oxidation-reduction reaction occurs when acidification, separate out sulfur:
Na2S2O3 + H2SO4 = Na2SO4 + H2S2O3 H2S2O3 = H2SO3 + S H2SO3 = H2O + S02.
With coordination, thiosulfate ions can form stable complexes with certain metal ions, for example, silver bromide can be dissolved in an aqueous solution of hypo to produce stable [Ag (S2O3) 2] 3-complex ions:
AgBr + 2Na2S2O3 = Na3 [Ag (S2O3) 2] + NaBr, so it is commonly used as a photographic fixing bath. Sodium sulfite and sulfur are boiled, and then filtration, evaporation, crystallization to prepare sodium thiosulfate.
| [Uses]
1. Sodium thiosulfate is Used in manufacture of the fixing powder and preparation of the photographic industry fixer, desiccant. Used as a reducing agent of dichromate in leather tanning industry.
2. Sodium thiosulfate is an important inorganic chemical raw material. It can be used in the synthesis of pesticides Bisultap, Thiosultap disodium, CARTAP and so on.
3. Used as analytical reagents, mordant and fixer.
4. Used as new insecticides, with stomach poisoning, uptake and contact action effects, it can prevent and treat rice yellow stem borer, stem borer, leaf roller, rice thrips and vegetables, fruit pests.
5. With uptake and strong contact, stomach poisoning effects, it can prevent and treat various rice pests and vegetables, fruit pests.
6. Used as the chlorine removal agent for Pulp and cotton fabric bleached, as chelating agents, anti-oxidants in the food industry, as detergents, disinfectants in the pharmaceutical industry.
7. Used as chelating agents, antioxidants, anti-browning agent, as the dechlorination agent of chlortetracycline hydrochloride (or chlortetracycline) chilled with ice, dechlorination reaction is as follows:
More chlorine content will cause side reactions of free sulfur, so only used for very dilute concentrations of chlorine.
Used as salt chelating agent, limited content is 0.1% or less.
| [Preparation]
Sodium thiosulphate is an important chemical commodity that is known to photographers as "hypo". It can be prepared by the reaction of sodium sulphite and the bisulphite with H2S:
2Na2S03 + 2NaHS03 + 2H2S -> 3Na2S203 + 3H20
It can also be prepared by the reaction of sulphur with sodium sulphite above 60 °C
Na2SO3 + S -> Na2S2O3 and by the reaction of H2S and permanganate.
Sodium thiosulphate decomposes at 310°C to form sulphur and Na2S03 , and at 400°C to form Na2S4 and Na2S. It absorbs S02 to form free sulphur and Na2S04 . Sodium thiosulphate forms many hydrates and their solubility relationships are quite complex.
| [Production method]
1. It is generated by heat of a solution of sodium sulfite and sulfur powder.
2. There are more synthesis methods of sodium thiosulfate, such as sodium sulfite method, sodium sulfide method and so on.
Sodium sulfite method
Soda solution reacts with sulfur dioxide gas, and caustic soda was added, adding sodium sulfide to remove impurities by filtration, and then sulfur powder was dissolved in a hot solution of sodium sulfite to react, filter, remove impurities, and then filter repeatedly, add caustic alkali to process, through concentration, filtration, crystallization, centrifugal dewatering, screening, to obtain the finished product of sodium thiosulfate. Reaction equation: Na2CO3 + SO2 = Na2SO3 + CO2 ↑
Na2SO3 + S + 5H2O = Na2S2O3 · 5H20
Sodium sulfide method
A raw material liquid formulated from sodium sulfide evaporation residue, barium sulfide wastewater (containing sodium carbonate and sodium sulfide) reacts with sulfur dioxide, sulfur powder was added after clarification, heated to react, evaporation, cooling crystallization, washing, separation, screening to obtain sulfur thiosulfate products. Reaction equation: 2Na2S + Na2CO3 + 4SO2 = 3Na2S2O3 + CO2 ↑
2Na2S + 3Na2CO3 + 6SO2 + 2S = 5Na2S2O3 + 3CO2 ↑
3. Dehydration method is that heat sodium thiosulfate pentahydrate crystalline indirect with steam, it dissolves into itself crystal water, concentration, centrifugal dewatering, drying, screening, to obtain the finished product of anhydrous sodium thiosulfate.
Na2S2O3 · 5H20 → Na2S2O3 + 5H2O
|
|
|