- Sulfamic acid
-
- $1.00 / 1KG
-
2024-04-08
- CAS:5329-14-6
- Min. Order: 25KG
- Purity: 99.5% AR Grade
- Supply Ability: 500tons per year
- Sulfamic acid
-
- $5.50 / 25Kg/Drum
-
2023-12-12
- CAS:5329-14-6
- Min. Order: 1ASSAYS
- Purity: 99%
- Supply Ability: 200tons per month
- Sulfamic acid
-
- $30.00 / 25KG
-
2023-12-12
- CAS:5329-14-6
- Min. Order: 1KG
- Purity: 99
- Supply Ability: 100ton
|
| | Sulfamic acid Basic information |
| | Sulfamic acid Chemical Properties |
| Melting point | 215-225 °C (dec.) (lit.) | | Boiling point | -520.47°C (estimate) | | density | 2.151 g/cm3 at 25 °C | | vapor pressure | 0.8Pa at 20℃ | | refractive index | 1.553 | | storage temp. | Store below +30°C. | | solubility | water: soluble213g/L at 20°C | | pka | -8.53±0.27(Predicted) | | form | Crystals or Crystalline Powder | | color | White | | PH | 1.2 (10g/l, H2O) | | Odor | odorless | | Water Solubility | 146.8 g/L (20 ºC) | | Merck | 14,8921 | | Stability: | Stable. | | InChIKey | IIACRCGMVDHOTQ-UHFFFAOYSA-N | | LogP | 0 at 20℃ | | CAS DataBase Reference | 5329-14-6(CAS DataBase Reference) | | NIST Chemistry Reference | Sulfamic acid(5329-14-6) | | EPA Substance Registry System | Sulfamic acid (5329-14-6) |
| | Sulfamic acid Usage And Synthesis |
| Chemical Properties | Sulfamic acid is a white orthorhombic flaky crystal, odorless, non-volatile and non-hygroscopic. Soluble in water and liquid ammonia, slightly soluble in methanol, insoluble in ethanol and ether, also insoluble in carbon disulfide and liquid sulfur dioxide. Its aqueous solution has the same strong acid properties as hydrochloric acid and sulfuric acid, but its corrosiveness to metals is much lower than that of hydrochloric acid. The toxicity is extremely small, but it should not be in contact with the skin for a long time, and it should not enter the eyes. | | Uses | Sulfamic acid is widely used in electroplating, hard-water scale reremovers, acidic cleaning agent, chlorine stabilizers, sulfonating agents, denitrification agents, disinfectants, flame retardants, herbicides, artificial sweeteners and catalysts.
Sulfamic acid is a precursor to sweet-tasting compounds. Reaction with cyclohexylamine followed by addition of NaOH gives C6H11NHSO3Na, sodium cyclamate.
Sulfamic acid is a water-soluble, moderately strong acid. An intermediate between sulfuric acid and sulfamide, it can be used as a precursor to sweet-tasting compounds, a therapeutic drug component, an acidic cleaning agent, and a catalyst for esterification. | | Application | Sulfamic acid, the monoamide of sulfuric acid, is a strong inorganic acid. It is generally used in chemical cleaning processes like removal of nitrites, carbonate- and phosphate-containing deposits.
Sulfamic acid can be used as a catalyst in:
Friedlander quinoline synthesis.
Liquid Beckmann rearrangement for the synthesis of amides from ketoximes.
The preparation of α-aminophosphonates via a three-component reaction between aldehydes, amines, and diethyl phosphite. | | Definition | ChEBI: Sulfamic acid is the simplest of the sulfamic acids consisting of a single sulfur atom covalently bound by single bonds to hydroxy and amino groups and by double bonds to two oxygen atoms. It is a strong acid, readily forming sulphamate salts, which is extremely soluble in water and normally exists as the zwitterion H3N+. SO3–. | | Reactions | Sulfamic acid is a strong acid that reacts with many basic compounds. It is heated to above the melting point (209°C) under normal pressure to begin to decompose, and continues to be heated to above 260°C to decompose into sulfur trioxide, sulfur dioxide, nitrogen, hydrogen and water.
(1) Sulfamic acid can react with metals to form transparent crystalline salts. Such as:
2H2NSO3H+Zn→Zn(SO3NH2)2+H2.
(2) Can react with metal oxides, carbonates and hydroxides:
FeO+2HSO3NH2→Fe(SO3NH2)2+H2O2
CaCO3+2HSO3NH2→Ca(SO3NH2)2+H2O+CO23
Ni(OH)2+2HSO3NH2→Ni(SO3NH2)2+H2O.
(3) Can react with nitrate or nitrite:
HNO3+HSO3NH2→H2SO4+N2O+H2O2
HNO2+HSO3NH2→H2SO4+N2+H2O.
(4) Can react with oxidants (such as potassium chlorate, hypochlorous acid, etc.):
KClO3+2HSO3NH2→2H2SO4+KCl+N2+H2O2
2HOCl+HSO3NH2→HSO3NCl2+2H2O | | General Description | Sulfamic acid appears as a white crystalline solid. Density 2.1 g / cm3. Melting point 205°C. Combustible. Irritates skin, eyes, and mucous membranes. Low toxicity. Used to make dyes and other chemicals. It is used as a raw material for the preparation of a synthetic sweetener i.e, sodium cyclohexylsulfamate. | | Air & Water Reactions | Moderately soluble in water [Hawley]. | | Reactivity Profile | Sulfamic acid reacts exothermically with bases. Aqueous solutions are acidic and corrosive. | | Hazard | Toxic by ingestion. | | Health Hazard | TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. | | Fire Hazard | Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. | | Flammability and Explosibility | Non flammable | | Side effects | Dermatotoxin - Burning of the skin.
Toxic Pneumonia - Inflammation of the lungs caused by inhalation of metal fumes or toxic gases and vapours. | | Toxicology | Sulfamic acid can be absorbed into the body through inhalation of its aerosols and ingestion, causing symptoms of coughing and sore throat upon inhalation; it is irritating to the skin and eyes with symptoms of redness, pain or burns; Inhaling sulfamic acid can irritate the nose and throat.
High exposure to sulfamic acid can irritate the lungs.
Higher exposures may cause a build-up of fluid in the lungs
(pulmonary edema), a medical emergency.
sulfamic acid can cause nausea, vomiting and stomach
pain.
Repeated exposure to sulfamic acid may affect the liver
and kidneys. | | Safety Profile | Poison by intraperitoneal route. Moderately toxic by ingestion. A human skin irritant. A corrosive irritant to skin, eyes, and mucous membranes. A substance that migrates to food from packaging materials. Violent or explosive reactions with chlorine, metal nitrates + heat, metal nitrites + heat, fuming HNO3. When heated to decomposition it emits very toxic fumes of SOx and NOx. See also SULFONATES. | | Potential Exposure | Sulfamic acid is used in metal and ceramic cleaning, bleaching paper pulp; and textiles metal; in acid cleaning; as a stabilizing agent for chlorine and hypochlorite in swimming pools; cooling towers; and paper mills. | | Shipping | UN2967 Sulfamic acid, Hazard class: 8; Labels: 8-Corrosive material. | | Purification Methods | Crystallise NH2SO3H from water at 70o (300mL per 25g), after filtering, by cooling a little and discarding the first batch of crystals (about 2.5g) before standing in an ice-salt mixture for 20minutes. The crystals are filtered off by suction, washed with a small quantity of ice cold water, then twice with cold EtOH and finally with Et2O. Dry it in air for 1hour, then store it in a desiccator over Mg(ClO4)2 [Butler et al. Ind Eng Chem (Anal Ed) 10 690 1938]. For the preparation of primary standard material see Pure Appl Chem 25 459 1969. | | Incompatibilities | The aqueous solution is a strong acid. Reacts violently with strong acids (especially fuming nitric acid), bases, chlorine. Reacts slowly with water, forming ammonium bisulfate. Incompatible with ammonia, amines, isocyanates, alkylene oxides; epichlorohydrin, oxidizers. |
| | Sulfamic acid Preparation Products And Raw materials |
|