- 1,3-Dinitronaphthalene
-
- $0.00 / 1KG
-
2022-02-21
- CAS:606-37-1
- Min. Order: 1KG
- Purity: 98.1%
- Supply Ability: 100 tons
|
| | 1,3-DINITRONAPHTHALENE Basic information |
| | 1,3-DINITRONAPHTHALENE Chemical Properties |
| Melting point | 146-148 °C (lit.) | | Boiling point | 358.84°C (rough estimate) | | density | 1.4330 (rough estimate) | | refractive index | 1.5800 (estimate) | | Stability: | Stable, but may be heat or shock sensitive. Incompatible with strong bases, strong oxidizing agents. | | EPA Substance Registry System | 1,3-Dinitronaphthalene (606-37-1) |
| Hazard Codes | Xi | | Risk Statements | 36/37/38 | | Safety Statements | 26-37/39 | | RIDADR | 2811 | | WGK Germany | 3 | | RTECS | QJ4550800 | | HazardClass | 6.1(b) | | PackingGroup | III |
| | 1,3-DINITRONAPHTHALENE Usage And Synthesis |
| Description | Dinitronaphthalene is a yellowish crystallinesolid. Molecular weight= 218.18; Freezing/Melting points:(1,3-) 146148℃; (1,5-) 218℃; (1,8-) 173℃. These substances are highly flammable, potentially explosive; shockand heat sensitive. | | Chemical Properties | beige powder | | Uses | 1,3-Dinitronaphthalene was used to study the photocatalytic oxidation reaction of 1,3-dinitronaphthalene in the presence of TiO(2) Degussa (P-25 grade). | | Definition | ChEBI: 1,3-dinitronaphthalene is a dinitronaphthalene. | | Synthesis Reference(s) | Journal of the American Chemical Society, 71, p. 2855, 1949 DOI: 10.1021/ja01176a078 | | General Description | Beige powder. | | Air & Water Reactions | Insoluble in water. | | Reactivity Profile | 1,3-DINITRONAPHTHALENE may be sensitive to heat or shock. | | Fire Hazard | Flash point data are not available for 1,3-DINITRONAPHTHALENE, but 1,3-DINITRONAPHTHALENE is probably combustible. | | Safety Profile | Suspected carcinogen.
Mutation data reported. When heated to
decomposition it emits toxic vapors of NOx | | Potential Exposure | Used as a dye intermediate; in themanufacture of explosives. | | First aid | Skin Contact: Flood all areas of body thathave contacted the substance with water. Do not wait toremove contaminated clothing; do it under the water stream.Use soap to help assure removal. Isolate contaminatedclothing when removed to prevent contact by others. EyeContact: Remove any contact lenses at once. Immediatelyflush eyes well with copious quantities of water or normalsaline for at least 2030 min. Seek medical attention.Inhalation: Leave contaminated area immediately; breathefresh air. Proper respiratory protection must be supplied toany rescuers. If coughing, difficult breathing or any othersymptoms develop, seek medical attention at once, even ifsymptoms develop many hours after exposure. Ingestion: Ifunconscious or convulsing, do not induce vomiting or giveanything by mouth. Assure that victim’s airway is open andlay him on his side with his head lower than his body andtransport at once to a medical facility. If conscious and notconvulsing, give a glass of water to dilute the substance. Ifmedical advice is not readily available, do not inducevomiting, and rush the victim to the nearest medicalfacility. | | storage | (1) Color Code—Yellow: Reactive Hazard; Storein a location separate from other materials, especially flammables and combustibles. (2) Color Code—Blue (all isomers): Health Hazard/Poison: Store in a secure poisonlocation. Prior to working with dinitronaphthalenes youshould be trained on its proper handling and storage. Storein tightly closed containers in a refrigerator or cool, wellventilated area away from alkalies, aluminum, sulfur,sulfuric acid, and heat. A regulated, marked area should beestablished where this chemical is handled, used, or storedin compliance with OSHA Standard 1910.1045. | | Shipping | Nitronaphthalene is not specifically cited inDOT’s Performance-Oriented Packaging Standards. But itmay be considered “Toxic solids, organic, n.o.s.” This compound requires a shipping label of “POISONOUS/TOXICMATERIALS.” It may fall into DOT Hazard Class 6.1 andPacking Group III. Dyes, solid, toxic, n.o.s. [or] Dye intermediates, solid, toxic, | | Incompatibilities | The 1,3- and 1,8-isomers are strong oxidizers. All are potentially explosive materials. These materials may form explosive metal salts with alkalies. Violentreaction with aluminum, sulfur, and sulfuric acid in thepresence of heat. |
| | 1,3-DINITRONAPHTHALENE Preparation Products And Raw materials |
|