| Product Identification | Back to Contents | 【Product Name】
1,2-Benzenedicarboxylic acid butyl phenylmethyl ester | 【Synonyms】
1,2-Benzenedicarboxylic acid, butyl phenylmethyl ester
Benzyl butyl phthalate
O1-Butyl O2-(phenylmethyl) benzene-1,2-dicarboxylate | 【CAS】
85-68-7 | 【Formula】
C19H20O4 | 【Molecular Weight】
312.37 | 【EINECS】
201-622-7 | 【RTECS】
TH9990000 | 【RTECS Class】
Tumorigen; Mutagen; Reproductive Effector | 【Beilstein/Gmelin】
2062204 | 【Beilstein Reference】
4-09-00-03218 | 【EC Index Number】
607-430-00-3 |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Clear, oily liquid, slight odor. | 【Solubility in water】
Insoluble | 【Melting Point】
-35 | 【Boiling Point】
370 | 【Vapor Pressure】
8E-06 (25 C) | 【Density】
1.12 g/cm3 | 【Partition Coefficient】
4.91 | 【Heat Of Vaporization】
87.92 kJ/mol | 【Heat Of Combustion】
-10453 kJ/mol | 【Usage】
Organic intermediate, plasticizer. | 【Saturation Concentration】
0.01 ppm at 20 C (calculated) | 【Vapor Density】
10.8 | 【Refractive Index】
1.5356 (20 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. | 【Inhalation】
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used. | 【Skin】
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas. | 【Eyes】
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
| Handling and Storage | Back to Contents | 【Storage】
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | 【Handling】
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. |
| Hazards Identification | Back to Contents | 【Inhalation】
Respiratory irritation is uncommon, but possible. | 【Skin】
Dermal irritation may sometimes develop. | 【Eyes】
Irritation of eyes, nose, and throat may occur. | 【Ingestion】
Gi tract or esophageal irritation may occur. |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Protective gloves and goggles. | 【Respirators】
Use NIOSH/MSHA approved respirator appropriate for exposure of concern. | 【Exposure Effects】
Central nervous system depression may occur with ingestion of large amounts. | 【Poison Class】
4 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
199 | 【Autoignition】
425 | 【Fire Fighting】
Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources. | 【Fire Potential】
Slight when exposed to heat or flame. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Apply water spray or mist to knock down vapors. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Remove trapped material with suction hoses. |
| Stability and Reactivity | Back to Contents | 【Disposal Code】
1 | 【Stability】
Can react with oxidizing materials. Reactive only under extreme conditions. | 【Incompatibilities】
Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. | 【Decomposition】
When heated to decomposition, it emits acrid smoke and irritating fumes. | 【Combustion Products】
Irritating vapors of unburned chemical may form in fires. |
|
| Company Name: |
J & K SCIENTIFIC LTD. |
| Tel: |
010-82848833 400-666-7788 |
| Fax: |
86-10-82849933 |
| WebSite: |
http://www.jkchemical.com |
| Company Name: |
Alfa Aesar |
| Tel: |
400-6106006 |
| Fax: |
021-67582001/03/05 |
| WebSite: |
http://chemicals.thermofisher.cn |
| Company Name: |
Energy Chemical |
| Tel: |
021-021-58432009 400-005-6266 |
| Fax: |
021-58436166 |
| WebSite: |
http://www.energy-chemical.com |
|