|Product Identification||Back to Contents|
Silicone oil (high temperature)
Dow Corning 805
Polysiloxanes, Me Ph
Siloxanes and Silicones, Me Ph
|First Aid Measures||Back to Contents|
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
|Handling and Storage||Back to Contents|
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
|Hazards Identification||Back to Contents|
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
May cause skin irritation. The toxicological properties of this material have not been fully investigated.
May cause eye irritation. The toxicological properties of this material have not been fully investigated.
|Exposure Controls/Personal Protection||Back to Contents|
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
|Fire Fighting Measures||Back to Contents|
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
|Accidental Release Measures||Back to Contents|
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.
|Stability and Reactivity||Back to Contents|
Stable under normal temperatures and pressures.
Strong oxidizing agents.
Irritating and toxic fumes and gases, silicon oxide.
|Company Name:||J & K SCIENTIFIC LTD.|
|Company Name:||Meryer (Shanghai) Chemical Technology Co., Ltd.|
|Tel:||+86-(0)21-61259100(Shanghai) +86-(0)755-86170099(ShenZhen) +86-(0)10-59487313(Beijing)|
|Fax:||+86-(0)21-61259102(Shanghai) +86-(0)755-86170066(ShenZhen) +86-(0)10-88580358(Beijing)|
|Company Name:||BeiJing Hwrk Chemicals Limted|
|Tel:||4006990298 010-57411839 020-31335234 021-51691807|
|Fax:||010-87653215 0757-86311057 021-55236763|
|Company Name:||Energy Chemical|
|Tel:||021-58432009 / 400-005-6266|