| Product Identification | Back to Contents | 【Product Name】
1,2-Dihydro-2,2,4-trimethylquinoline homopolymer | 【Synonyms】
Antioxidant HS
Flectol H
Poly(1,2-dihydro-2,2,4-trimethylquinoline) | 【CAS】
26780-96-1 | 【EINECS】
500-051-3 | 【RTECS】
TQ2625000 | 【RTECS Class】
Tumorigen; Reproductive Effector | 【Beilstein/Gmelin】
NA |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Yellowish to amber pellets, powder or flakes or beige powder. Slight odor. | 【Melting Point】
355 | 【Boiling Point】
132 (13 torr) | 【Vapor Pressure】
74 | 【Density】
~1.09 g/cm3 (20 C) | 【Usage】
Antioxidant. |
| First Aid Measures | Back to Contents | 【Ingestion】
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. | 【Inhalation】
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used. | 【Skin】
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. | 【Eyes】
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. |
| Handling and Storage | Back to Contents | 【Storage】
Keep tightly closed in a cool place in a tightly closed container. | 【Handling】
Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed. |
| Hazards Identification | Back to Contents | 【Ingestion】
Swallowing small amounts of this material during normal handling is not likely to cause harmful effects. Swallowing large amounts may be harmful. | 【Inhalation】
Symptoms of exposure to this compound may include irritation of the eyes, nose, mouth, throat, lungs and stomach. Prolonged or repeated skin contact may result in irritation. Eye contact may result in tearing, reddening and swelling. Inhalation may result in runny nose, sneezing, coughing and chest discomfort. | 【Skin】
May cause mild skin irritation. Prolonged or repeated contact may dry the skin. Symptoms may include redness, burning, drying and cracking of skin, and skin burns. Additional symptoms of skin contact may include: allergic skin reaction (delayed skin rash which may be followed by blistering, scaling and other skin effects), Passage of this material into the body through the skin is possible, but it is unlikely that this would result in harmful effects during safe handling and use. | 【Eyes】
May cause mild eye irritation. Symptoms include stinging, tearing, and redness. |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots. | 【Respirators】
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
110 | 【Fire Fighting】
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used. | 【Fire Potential】
This chemical is combustible. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. |
|
| Company Name: |
Energy Chemical |
| Tel: |
021-021-58432009 400-005-6266 |
| Fax: |
021-58436166 |
| WebSite: |
http://www.energy-chemical.com |
| Company Name: |
Bide Pharmatech Ltd. |
| Tel: |
400-1647117 15221909166 |
| Fax: |
+86-21-61629029 |
| WebSite: |
www.bidepharm.com |
|