ChemicalBook >>Acridin-9-amine hydrochloride>>9-Aminoacridine hydrochloride(134-50-9)

9-Aminoacridine hydrochloride(134-50-9)

9-Aminoacridine hydrochloride(134-50-9)
Product IdentificationBack to Contents
【Product Name】

9-Aminoacridine hydrochloride
【Synonyms】

5-Aminoacridine hydrochloride
9-Acridinamine, monohydrochloride
9-Aminoacridine hydrochloride
Acramine Yellow
Aminacrine hydrochloride
Monacrin
【CAS】

134-50-9
【Formula】

C13H11ClN2
【Molecular Weight】

230.7
【EINECS】

205-145-5
【RTECS】

AR7350000
【RTECS Class】

Drug; Mutagen
【Beilstein/Gmelin】

4274034
Physical and Chemical PropertiesBack to Contents
【Appearance】

Pale yellow crystals. One of the most highly fluorescent substances.
【Usage】

Used experimentally as a probe for biological membranes and dna.
First Aid MeasuresBack to Contents
【Ingestion】

If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. MMEDIATELY transport the victim to a hospital.
【Inhalation】

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
【Skin】

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
【Eyes】

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Ingestion】

See inhalation.
【Inhalation】

This compound may cause local sensitization.
【Skin】

See inhalation.
【Eyes】

See inhalation
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter).
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Fires involving this chemical should be controlled with carbon dioxide, dry chemical, or Halon foam extinguishers.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and ReactivityBack to Contents
【Stability】

No data.
Company Name: Syntechem Co.,Ltd
Tel:
Fax: E-Mail Inquiry
WebSite: www.syntechem.com
Company Name: Shanghai Fuhe Chemistry Technology Co., Ltd.
Tel: 0086-21-67651709
Fax: 0086-21-67651705
WebSite: www.chemicalbook.com/ShowSupplierProductsList15402/0.htm
Company Name: Zhengzhou HongSheng Pharmaceutical Co., Ltd.
Tel: 1352-6885213 15637198702
Fax: 0371-63709726
WebSite: http://www.xpkhx.com
Company Name: Finetech Industry Limited
Tel: 027-87465837 19945049750
Fax: 027-8777-2287
WebSite: www.finetechchem.com/
Company Name: Shanghai Na Qian Chemical Technology Co. Ltd.
Tel: 13598610367
Fax: QQ:2468833170
WebSite: www.chemicalbook.com/supplier/11167012/
Company Name: Suzhou Laihui Biotechnology Co., Ltd.
Tel: 180-13160973 +86-18013160973
Fax: 0512-68236973
WebSite: www.rywaybio.com
Company Name: Zhengzhou Acme Chemical Co., Ltd.
Tel: 0371-0371-63315541 13323832564
Fax: QQ:3001332135
WebSite: www.acmechem.cn/
Company Name: PeiShen biological engineering (Shanghai) co., LTD
Tel: 021-33040955-0 13651980230
Fax: 021-61330236
WebSite: www.chemicalbook.com/showsupplierproductslist30821/0.htm