|Product Identification||Back to Contents|
|Physical and Chemical Properties||Back to Contents|
Clear, yellow liquid.
|【Solubility in water】|
214 (20 C)
0.97 g/cm3 (18 C)
1.39918 (19 C)
|First Aid Measures||Back to Contents|
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
|Handling and Storage||Back to Contents|
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator/flammables. Keep containers tightly closed.
Wash thoroughly after handling. Use with adequate ventilation. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
|Hazards Identification||Back to Contents|
May cause respiratory tract irritation. Vapors may cause dizziness or suffocation.
Causes skin irritation and possible burns.
May cause eye irritation and possible burns.
May cause digestive tract disturbances.
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
|【EC Risk Phrase】|
R 11 36/37/38
|【EC Safety Phrase】|
S 16 26 36
|Exposure Controls/Personal Protection||Back to Contents|
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
The toxological properties of this substance have not been fully investigated.
|Fire Fighting Measures||Back to Contents|
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Water may be ineffective. Do NOT use straight streams of water. Cool containers with flooding quantities of water until well after fire is out.
|【Upper exp. limit】|
|【Lower exp. limit】|
|Accidental Release Measures||Back to Contents|
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.
|Stability and Reactivity||Back to Contents|
Stable under normal temperatures and pressures.
Strong oxidizing agents.
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Fire may produce irritating, corrosive and/or toxic gases.
|Company Name:||J & K SCIENTIFIC LTD.|
|Company Name:||Meryer (Shanghai) Chemical Technology Co., Ltd.|
|Tel:||+86-(0)21-61259100(Shanghai) +86-(0)755-86170099(ShenZhen) +86-(0)10-62670440(Beijing)|
|Fax:||+86-(0)21-61259102(Shanghai) +86-(0)755-86170066(ShenZhen) +86-(0)10-62670790(Beijing)|
|Company Name:||Alfa Aesar|
|Tel:||800-810-6000, 400-610-6006,800 810 6006(Bulk Inquiry)|
|Company Name:||Energy Chemical|
|Tel:||021-58432009 / 400-005-6266|