ChemicalBook >>4-(Trifluoromethyl)benzaldehyde>>4-(Trifluoromethyl)benzaldehyde(455-19-6)

4-(Trifluoromethyl)benzaldehyde(455-19-6)

4-(Trifluoromethyl)benzaldehyde(455-19-6)
Product IdentificationBack to Contents
【Product Name】

4-(Trifluoromethyl)benzaldehyde
【Synonyms】

alpha,alpha,alpha-Trifluoro-p-tolualdehyde
【CAS】

455-19-6
【Formula】

C8H5F3O
【Molecular Weight】

174.12
【EINECS】

207-240-7
【Beilstein/Gmelin】

1101680
【Beilstein Reference】

4-07-00-00678
【EC Class】

harmful
Physical and Chemical PropertiesBack to Contents
【Appearance】

Clear, light yellow liquid.
【Solubility in water】

1.5 g/L (20 C)
【Melting Point】

1-2
【Boiling Point】

176
【Vapor Pressure】

1.1 (25 C)
【Density】

1.275 g/cm3
【Partition Coefficient】

2.61
【Heat Of Vaporization】

41.3 kJ/mol
【Refractive Index】

1.46 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
【Inhalation】

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
【Skin】

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
【Eyes】

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and StorageBack to Contents
【Storage】

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store under an inert atmosphere.
【Handling】

Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Handle under an inert atmosphere. Store protected from air. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards IdentificationBack to Contents
【Inhalation】

Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
【Skin】

Causes skin irritation. May cause cyanosis of the extremities.
【Eyes】

Causes eye irritation. May cause chemical conjunctivitis and corneal damage.
【Ingestion】

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
【EC Risk Phrase】

R 36/37/38
【EC Safety Phrase】

S 26 36
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
【Respirators】

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
【Exposure Effects】

Effects may be delayed.
Fire Fighting MeasuresBack to Contents
【Flash Point】

65
【Fire Fighting】

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Place under an inert atmosphere.
Stability and ReactivityBack to Contents
【Disposal Code】

2
【Incompatibilities】

Air, oxidizing agents, reducing agents.
【Stability】

Stable at room temperature in closed containers under normal storage and handling conditions.
【Decomposition】

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.
Transport InformationBack to Contents
【HS Code】

2913 00 00
Company Name: CHANGZHOU FLUORIDE CHEMICAL CO.,LTD
Tel: 15995021858
Fax: 0519-85227531
WebSite: http://www.fluoridechem.com/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Changzhou Sunchem Pharmaceutical Chemical Material Co.,Ltd.
Tel: 0519-85195575 15861192208
Fax: 85195585
WebSite: http://www.sunkechem.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: TCI (Shanghai) Development Co., Ltd.
Tel: 021-67121386
Fax: 021-67121385
WebSite: https://www.tcichemicals.com/CN/zh/
Company Name: Beijing dtftchem Technology Co., Ltd.
Tel: 010-60275820 13031183356
Fax: 010-60270825
WebSite: www.dtfchem.com
Company Name: BeiJing Hwrk Chemicals Limted
Tel: 0757-86329057 18501085097
Fax: 010-89508210
WebSite: www.hwrkchemical.com