ChemicalBook >>Diisooctyl phthalate>>1,2-Benzenedicarboxylic acid diisooctyl ester(27554-26-3)

1,2-Benzenedicarboxylic acid diisooctyl ester(27554-26-3)

1,2-Benzenedicarboxylic acid diisooctyl ester(27554-26-3)
Product IdentificationBack to Contents
【Product Name】

1,2-Benzenedicarboxylic acid diisooctyl ester
【Synonyms】

1,2-Benzenedicarboxylic acid, diisooctylester
Bis(6-methylheptyl) benzene-1,2-dicarboxylate
【CAS】

27554-26-3
【Formula】

C24H38O4
【Molecular Weight】

390.62
【EINECS】

248-523-5
【RTECS】

TI1300000
【RTECS Class】

Primary Irritant
【Beilstein/Gmelin】

NA
Physical and Chemical PropertiesBack to Contents
【Appearance】

Oily colorless liquid with a slight ester odor.
【Solubility in water】

Insoluble
【Melting Point】

-4
【Boiling Point】

370
【Vapor Pressure】

6E-6 (25 C)
【Density】

0.984 g/cm3 (20 C)
【Usage】

Plasticizer for poly vinyl chloride jackets for building wire.
【Vapor Density】

13.5
First Aid MeasuresBack to Contents
【Ingestion】

Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual on the left side with the head down. Contact a physician, medical facility, or poison control center for advice about whether to induce vomiting. If possible, do not leave individual unattended.
【Inhalation】

Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
【Skin】

Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists.
【Eyes】

Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Inhalation】

Respiratory irritation is uncommon, but possible.
【Skin】

Dermal irritation may sometimes develop.
【Eyes】

Irritation of eyes, nose, and throat may occur.
【Ingestion】

Gi tract or esophageal irritation may occur.
【Hazards】

None
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Use of garments to protect workmen from irritation due to contact with phthalic anhydride which is used in the manufacturing process of phthalic acid esters; gloves should be used to prevent contamination of the hand and lower arm. Synth of phthalates require good ventilation in order to minimize contamination of air with phthalic anhydride or alcohols. There may be also some need for skin protection. Handling mineral acids used as catalysts requires ordinary precautions.
【Respirators】

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
【Exposure Effects】

Central nervous system depression may occur with ingestion of large amounts.
Fire Fighting MeasuresBack to Contents
【Flash Point】

231
【Autoignition】

393
【Fire Fighting】

Fire Extinguishing Agents Not to Be Used: Water or foam may cause frothingFire Extinguishing Agents: Dry chemical, carbon dioxide, foam.
【Upper exp. limit】

5.3
【Lower exp. limit】

.3
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Evacuate area and ventilate. Wear protective equipment. If required, use an inert absrobent. Sweep up and place in an appropriate container for disposal. Wash contaminated surfaces.
Stability and ReactivityBack to Contents
【Stability】

No data.
【Incompatibilities】

Reacts exothermically with acids to generate isooctyl alcohol and phthalic acid Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products Interaction with caustic solutions.
【Decomposition】

When heated to decomposition it emits acrid smoke and irritating fumes.
【Combustion Products】

None
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: BeiJing Hwrk Chemicals Limted
Tel: 0757-86329057 18501085097
Fax: 010-89508210
WebSite: www.hwrkchemical.com
Company Name: Shanghai Hanhong Scientific Co.,Ltd.
Tel: 021-54306202 13764082696;
Fax:
WebSite: https://www.hanhongsci.com
Company Name: BEST-REAGENT
Tel: 400-1166-196 18981987031
Fax: 028-84555506 800101999
WebSite: http://www.hx-r.com/
Company Name: Tianjin heowns Biochemical Technology Co., Ltd.
Tel: 400 638 7771
Fax:
WebSite: www.heowns.com
Company Name: Hangzhou Yuhao Chemical Technology Co., Ltd
Tel: 0571-82693216
Fax: +86-571-82880190
WebSite: www.chemyuhao.com
Company Name: Chengdu Ai Keda Chemical Technology Co., Ltd.
Tel: 4008-755-333 18080918076
Fax: 028-86757656
WebSite: http://www.aikeshiji.com