|Product Identification||Back to Contents|
4-Methylcyclohexanol, mixed isomers
|Physical and Chemical Properties||Back to Contents|
Colorless liquid. Exists in two geometrical isomers (cis and trans). Melting point: -9.2 C (cis).
|【Solubility in water】|
0.9328 g/cm3 (0 C)
1.462 (14 C)
|First Aid Measures||Back to Contents|
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
|Handling and Storage||Back to Contents|
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
|Hazards Identification||Back to Contents|
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
May cause skin irritation. The toxicological properties of this material have not been fully investigated.
May cause eye irritation. The toxicological properties of this material have not been fully investigated.
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
|【EC Risk Phrase】|
|【EC Safety Phrase】|
|Exposure Controls/Personal Protection||Back to Contents|
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
The toxological properties of this substance have not been fully investigated.
|Fire Fighting Measures||Back to Contents|
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
|【Lower exp. limit】|
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.
|Accidental Release Measures||Back to Contents|
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
|Stability and Reactivity||Back to Contents|
Stable under normal temperatures and pressures.
Strong oxidizing agents, acid chlorides, acid anhydrides.
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Fire may produce irritating, corrosive and/or toxic gases.
|Company Name:||J & K SCIENTIFIC LTD.|
|Company Name:||Alfa Aesar|
|Company Name:||BeiJing Hwrk Chemicals Limted|
|Company Name:||Energy Chemical|
|Tel:||021-58432009 / 400-005-6266|