ChemicalBook >>1,2-Bis(tetrabromophthalimido) ethane>>1,2-Bis(tetrabromophthalimido) ethane(32588-76-4)

1,2-Bis(tetrabromophthalimido) ethane(32588-76-4)

1,2-Bis(tetrabromophthalimido) ethane(32588-76-4)
Product IdentificationBack to Contents
【Product Name】

1,2-Bis(tetrabromophthalimido) ethane
【Synonyms】

1H-Isoindole-1,3(2H)-dione, 2,2'-(1,2-ethanediyl)bis(4,5,6,7-tetrabromo-
2,2'-(1,2-Ethanediyl)bis(4,5,6,7-tetrabromo-1H-isoindole-1,3(2H)-dione)
BT 93
BT 93D
BT 93W
Ethylene bis(tetrabromophthalimide)
【CAS】

32588-76-4
【Formula】

C18H4Br8N2O4
【Molecular Weight】

951.52
【EINECS】

251-118-6
【RTECS】

NR3398507
【RTECS Class】

Primary Irritant
【Beilstein/Gmelin】

1559294
Physical and Chemical PropertiesBack to Contents
【Melting Point】

465
【Density】

2.67 g/cm3 (20 C)
First Aid MeasuresBack to Contents
【Ingestion】

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
【Inhalation】

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
【Skin】

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
【Eyes】

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Ingestion】

See inhalation.
【Inhalation】

This compound may cause transient eye irritation.
【Skin】

See inhalation.
【Eyes】

See inhalation
【Hazards】

Flash point data for this compound are not available but it is probably non-flammable.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Fires involving this compound should be controlled using a dry chemical, carbon dioxide, foam or Halon extinguisher.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

You should dampen the solid spill material with acetone, then transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the adsorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a strong soap and water solution. Do not reenter the contaminate area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
Stability and ReactivityBack to Contents
【Incompatibilities】

May react with strong oxidizers.
【Stability】

No data.
Company Name: HUBEI RISHENGCHANG NEW MATERIAL TECHNOLOGY CO.,LTD
Tel: 13396066230
Fax:
WebSite: https://show.guidechem.com/hbrsc2/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: TAIYUAN RHF CO.,LTD.
Tel: +86 351 7031519
Fax: +86 351 7031519
WebSite: www.rhfchem.com
Company Name: Chemsky(shanghai)International Co.,Ltd.
Tel: 021-50135380
Fax:
WebSite: www.shchemsky.com
Company Name: XiaoGan ShenYuan ChemPharm co,ltd
Tel: 0712-0712-2580635 15527768850
Fax:
WebSite: http://www.farchem.com/
Company Name: Chembridge International Corp.(Taipei/Dongguan/Nanjing)
Tel: 025-84712192
Fax: 025-84712052
WebSite: http://www.chembridge.com.tw
Company Name: Hangzhou Yuhao Chemical Technology Co., Ltd
Tel: 0571-82693216
Fax: +86-571-82880190
WebSite: www.chemyuhao.com
Company Name: Cantotech Chemicals, Ltd.
Tel: 86-0755-86635001
Fax: 86-0755-22642228
WebSite: www.cantotech.com