| Product Identification | Back to Contents | 【Product Name】
MMA | 【Synonyms】
Acryester M
Diakon
Methacrylic acid, methyl ester
Methyl 2-methyl-2-propenoate
Pegalan | 【CAS】
80-62-6 | 【Formula】
C5H8O2 | 【Molecular Weight】
100.12 | 【EINECS】
201-297-1 | 【RTECS】
OZ5075000 | 【RTECS Class】
Tumorigen; Mutagen; Reproductive Effector; Human Data; Primary Irritant | 【Merck】
12,6005 | 【Beilstein/Gmelin】
605459 | 【Beilstein Reference】
4-02-00-01519 | 【EC Index Number】
607-035-00-6 | 【EC Class】
Highly flammable; Irritant; Sensitising |
| Physical and Chemical Properties | Back to Contents | 【Appearance】
Clear, colorless liquid with a fragrant, fruity or pungent, acrid odor. | 【Solubility in water】
15.9 g/L (20 C) | 【Melting Point】
-48 | 【Boiling Point】
100 | 【Vapor Pressure】
39 (25 C) | 【Density】
0.9491 g/cm3 (15 C) | 【Partition Coefficient】
1.38 | 【Heat Of Vaporization】
32.28 kJ/mol | 【Heat Of Combustion】
-2704 kJ/mol | 【Usage】
Monomer for polymethacrylate resins, impregnation of concrete. | 【Vapor Density】
3.6 | 【Saturation Concentration】
3.8% at 20 C | 【Odor threshold】
0.05 ppm | 【Refractive Index】
1.4168 (15.6 C) |
| First Aid Measures | Back to Contents | 【Ingestion】
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately. | 【Inhalation】
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. | 【Skin】
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | 【Eyes】
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. |
| Handling and Storage | Back to Contents | 【Storage】
Keep away from heat, sparks, and flame. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. After opening, purge container with nitrogen before reclosing. Periodically test for peroxide formation on long-term storage. Addition of water or appropriate reducing materials will lessen peroxide formation. | 【Handling】
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Ground and bond containers when transferring material. Avoid contact with skin and eyes. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid ingestion and inhalation. If peroxide formation is suspected, do not open or move container. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. |
| Hazards Identification | Back to Contents | 【Inhalation】
Inhalation of vapors irritates the respiratory tract. Symptoms from overexposure can include coughing, chest pain, headache, drowsiness, nausea, anorexia, irritability and narcosis. Very high levels may cause pulmonary edema and death. This material has been linked to cardiac arrest and other cardiovascular problems because of its ability to lower the blood pressure. | 【Skin】
Causes irritation to skin. Symptoms include redness, itching, and pain. May cause allergic skin reactions. May be absorbed through the skin. | 【Eyes】
Causes irritation, redness, and pain. | 【Ingestion】
Harmful if swallowed. May cause diarrhea, nausea and vomiting. Swallowing produces acute systemic effects paralleling ingestion. Ingestion has been linked to liver and kidney damage. | 【Hazards】
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Material is lighter than water and a fire may be spread by the use of water. May polymerize explosively when involved in a fire. Containers may explode when heated. | 【EC Risk Phrase】
R 11 37/38 43 | 【EC Safety Phrase】
S 24 37 46 | 【UN (DOT)】
1247 |
| Exposure Controls/Personal Protection | Back to Contents | 【Personal Protection】
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | 【Respirators】
A half-face organic vapor respirator may be worn for up to ten times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece organic vapor respirator may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. | 【Exposure Effects】
Prolonged or repeated skin contact may cause sensitization dermatitis and possible destruction and/or ulceration. May cause reproductive and fetal effects. Repeated exposure may cause tingling in the extremities and other nervous system abnormalities. | 【Exposure limit(s)】
TLV: 100 ppm; 410 mg/m3 (as TWA) (ACGIH 1994-1995). OSHA PEL: TWA 100 ppm (410 mg/m3) NIOSH REL: TWA 100 ppm (410 mg/m3) NIOSH IDLH: 1000 ppm | 【Poison Class】
4 |
| Fire Fighting Measures | Back to Contents | 【Flash Point】
10 | 【Autoignition】
430 | 【Fire Fighting】
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Vapor may cause flash fire. Water may be ineffective. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Water may be ineffective. For large fires, use water spray, fog or alcohol-resistant foam. Do NOT use straight streams of water | 【Upper exp. limit】
8.2 | 【Lower exp. limit】
1.7 | 【Fire Potential】
Flammable liquid. Contact with strong oxidizers may cause fire. |
| Accidental Release Measures | Back to Contents | 【Small spills/leaks】
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Scoop up with a nonsparking tool, then place into a suitable container for disposal. Remove all sources of ignition. Provide ventilation. |
| Stability and Reactivity | Back to Contents | 【Incompatibilities】
Incompatible with polymerization catalysts (peroxides, persulfates) light, heat, nitric acid and other strong oxidizers, ammonia, amines, halogens and halogen compounds. | 【Stability】
Stable at room temperature for a limited storage period.Vapors are uninhibited and may form polymers in vents, causing stoppage. Violent eruption of closed containers may occur when polymerization occurs. Polymerization may be caused by elevated temperature, oxidizers, peroxides, or sunlight. | 【Decomposition】
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide. | 【Combustion Products】
Toxic gases and vapors (such as carbon monoxide) may be released in a fire involving methyl methacrylate. |
|
|