The Physical and chemical properties of Polypropylene

Description

Polypropylene (PP), or polypropene, is a thermoplastic polymer used in various applications. It is produced via chain-growth polymerization from the monomer propylene.

Synthesis method

Polypropylene with the basic methyl substituted ethylene (i.e., propylene) as the monomer is prepared industrially by the polymerization of propylene (C3 H6 ) in a low-pressure process using a mixture of aluminum triethyl [(C2 H5 )3 Al] and titanium tetrachloride (TiCl4 ) as catalysts. The polymerization reaction is very simple and can be written as follows:

n (CH2 =CH2 —CH2 ) → [—CH(CH2 )—CH2 —]n

Physical and chemical properties

The reaction mechanism induces a chain having a helical structure that exhibits the same asymmetrical stereochemical configuration of carbon atoms. This leads to a macromolecule having a high degree of crystallinity. Hence, polypropylene has considerably improved mechanical properties compared to polyethylene; it has a low density (900–915 kg.m–3), is stiffer, more complex, and has a higher strength than many polyethylene grades. Moreover, its higher melting point (160°C) can be used at higher temperatures than PE with a superior temperature limit of 100°C. Its chemical resistance is also significantly increased and only attacked by strong oxidants. Stress cracking of the PP can be a problem if proper selection of the resin is not made.

Uses

In comparison with PE, it exists in a few commercial grades, but the plastic is stereospecific and can be isotactic and atactic. The better mechanical properties of these products extend their use into larger shapes, applying the sheet materials on the interior of appropriately designed vessels, such as packing in columns and as solid containers to compete with glass and steel. The modulus of the polypropylene is somewhat higher, which is beneficial in certain instances. The coefficient of thermal expansion is less for polypropylene than for high-density polyethylene. Fusion welding with a hot nitrogen gun is practical for both materials when the technique is learned. The two main polypropylene applications are injected molded parts and fibers and filaments. Polypropylene is prepared either by the Spherisol process licensed by Basell that combines liquid and gas phase polymerization with a Ziegler–Natta catalyst or by the Borstar process introduced by Borealis.

References

[1] Materials Handbook; DOI 10.1007/978-1-84628-669-8.