Bis(beta-chlorethyl)-formal Chemische Eigenschaften,Einsatz,Produktion Methoden
Chemische Eigenschaften
Bis(2-chloroethoxy)methane is a colorless
liquid.
Verwenden
Manufacture of insecticides, polymers; degreasing solvent; intermediate for polysulfide
rubber.
Allgemeine Beschreibung
A colorless liquid. Boiling point 217.5°C, Flash point 230°F. Density 1.23 g / cm3. May be toxic by ingestion or inhalation. Severely irritates skin, eyes, and mucous membranes. Used as a solvent.
Air & Water Reaktionen
Slightly soluble in water.
Reaktivität anzeigen
Bis(2-chloroethoxy)methane, the b-chloroethyl acetal of formaldehyde, is incompatible with oxidizing agents.
Health Hazard
ACUTE/CHRONIC HAZARDS: Toxic by inhalation and ingestion; Strong irritant.
Brandgefahr
Not Flammable.
mögliche Exposition
The chloroalkyl ethers have a wide
variety of industrial uses in organic synthesis, treatment of
textiles; the manufacture of polymers; polysulfide rubbers,
and insecticides; as degreasing agents and solvents; and in
the preparation of ion exchange resins.
Environmental Fate
Biological. Using settled domestic wastewater inoculum, bis(2-chloroethoxy)methane (5 and 10
mg/L) did not degrade after 28 d of incubation at 25 °C (Tabak et al., 1981).
Chemical/Physical. At influent concentrations of 10, 1.0, 0.1, and 0.01 mg/L, the GAC
adsorption capacities were 50, 11, 2.6, and 0.6 mg/g, respectively (Dobbs and Cohen, 1980).
Versand/Shipping
UN2810 Toxic liquids, organic, n.o.s., Hazard
Class: 6.1; Labels: 6.1—Poisonous materials, Technical
Name Required.
Inkompatibilitäten
The aqueous solution is a strong acid;
keep away from bases and alkaline material. Incompatible
with oxidizers (chlorates, nitrates, peroxides, permanganates,
perchlorates, chlorine, bromine, fluorine, etc.); contact
may cause fires or explosions. Keep away from alkaline
materials, strong bases, strong acids, oxoacids, epoxides.
Contact with mineral acids causes decomposition.
Waste disposal
Consult with environmental
regulatory agencies for guidance on acceptable disposal practices.
Generators of waste containing this contaminant
(≥100 kg/mo) must conform with EPA regulations governing
storage, transportation, treatment, and waste disposal.
Destroy by high-temperature incineration with HCl scrubber.
Bis(beta-chlorethyl)-formal Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
