Peroxyessigsäure ...% Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.
CHEMISCHE GEFAHREN
Bei Stoß, Reibung oder Erschütterung explosionsartige Zersetzung möglich. Kann beim Erhitzen explodieren. Starkes Oxidationsmittel. Reagiert sehr heftig mit brennbaren und reduzierenden Stoffen. Schwache Säure. Greift viele Metalle einschließlich Aluminium an.
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt (ACGIH 2005).
MAK: Krebserzeugend Kategorie 3B; (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation, über die Haut und durch Verschlucken.
INHALATIONSGEFAHREN
Nur ungenügende Angaben vorhanden über die Geschwindigkeit, mit der eine gesundheitsschädliche Konzentration in der Luft beim Verdampfen bei 20°C erreicht wird.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz verätzt die Augen, die Haut und die Atemwege. ätzend beim Verschlucken. Inhalation kann zu Lungenödem führen (s.Anm.).
LECKAGE
Gefahrenbereich verlassen! Fachmann zu Rate ziehen! Ausgelaufene Flüssigkeit in abgedeckten Kunststoffbehältern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT mit Sägemehl oder anderen brennbaren Absorptionsmitteln binden. NICHT in die Kanalisation spülen. Persönliche Schutzausrüstung: Chemikalienschutzanzug mit umgebungsluftunabhängigem Atemschutzgerät. NICHT in die Umwelt gelangen lassen.
R-Sätze Betriebsanweisung:
R7:Kann Brand verursachen.
R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.
R35:Verursacht schwere Verätzungen.
R50:Sehr giftig für Wasserorganismen.
R10:Entzündlich.
R34:Verursacht Verätzungen.
R22:Gesundheitsschädlich beim Verschlucken.
R20:Gesundheitsschädlich beim Einatmen.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
S3/7:Behälter dicht geschlossen halten und an einem kühlen Ort aufbewahren.
S23:Gas/Rauch/Dampf/Aerosol nicht einatmen(geeignete Bezeichnung(en) vom Hersteller anzugeben).
S14:Von . . . fernhalten (inkompatible Substanzen sind vom Hersteller anzugeben).
S60:Dieses Produkt und sein Behälter sind als gefährlicher Abfall zu entsorgen.
S9:Behälter an einem gut gelüfteten Ort aufbewahren.
S7:Behälter dicht geschlossen halten.
S3:Kühl aufbewahren.
Beschreibung
Since the early 1900s, chlorine has been used as a water disinfectant.
It was favored by water and wastewater industries for
disinfection until several harmful disinfection by-products were
discovered in chlorinated water. Studies were done to find and
eliminate disinfection byproduct precursors and look for an
alternative disinfectant, which turned out to be peracetic acid, or
PAA. Peracetic acid is a chemical product belonging to peroxide
compounds such as hydrogen peroxide. However, unlike
hydrogen peroxide, it is a more potent antimicrobial agent.
Peracetic acid has high germicidal efficiency and sterilizing
capability, and its degradation residuals are not dangerous to
the environment or toxic to human health. Until 1960,
peracetic acid was of special interest to the food processing
industry and actually was considered the only agent able to
replace glutaraldehyde in the sterilization of surgical, medical,
and odontoiatry instruments. The actual core medical applications
of peracetic acid are its potent antimicrobial action, also at
low temperatures, and the total absence of toxic residuals.
Chemische Eigenschaften
colourless liquid with an acrid odour
Verwenden
Peroxyacetic acid is used as an epoxidizingagent, for bleaching, as a germicide and fungicide, and in the synthesis of pharmaceuticals.Its solution Dialox is used as a cleansing andsterilizing agent in the reuse of highly permeable dialyzers. Turcic et al. (1997) have reported the efficacy of peroxyacetic acid asa local antiseptic in healing war wounds.Oxidative degradation of polynuclear aromatic hydrocarbons by peroxy acid in contaminated soils has been effectively achieved(N’Guessan et al. 2004).
Vorbereitung Methode
Peracetic acid (PAA) is a mixture of acetic acid (CH3COOH)
and hydrogen peroxide (H2O2) in an aqueous solution. It is a
very strong oxidizing agent and has stronger oxidation
potential than chlorine or chlorine dioxide. Liquid, clear,
and colorless with no foaming capability. It has a strong
pungent acetic acid odor, and the pH is acid . Peracetic acid is produced by reacting acetic acid and hydrogen peroxide. The reaction is allowed to continue
for up to 10 days in order to achieve high yields of product.
Additional methods of preparation involve the oxidation of
acetaldehyde or alternatively as an end product of the reaction
of acetic anhydride, hydrogen peroxide, and sulfuric
acid. Another method involves the reaction of tetraacetylethylenediamine
(TAED) in the presence of an alkaline hydrogen peroxide solution.
Allgemeine Beschreibung
Colorless liquid with a strong, pungent acrid odor. Used as a bactericide and fungicide, especially in food processing; as a reagent in making caprolactam and glycerol; as an oxidant for preparing epoxy compounds; as a bleaching agent; a sterilizing agent; and as a polymerization catalyst for polyester resins.
Air & Water Reaktionen
Soluble in water
Reaktivität anzeigen
Self-reactive. Peracids should be handled only in small quantities and with extreme care when pure or very concentrated. Organic peracids, such as Peroxyacetic acid, are so unstable that they may explode during distillation, even under reduced pressure [NFPA 1991].
Health Hazard
Peroxyacetic acid is a severe irritant to theskin and eyes. It can cause severe acid burns.Irritation from 1 mg was severe on rabbits’eyes. Its toxicity is low. The toxicologicalroutes of entry to the body are inhalation,ingestion, and skin contact. The toxicity dataare as follows (NIOSH 1986):LC50 inhalation (rats): 450 mg/m
3LD50 oral (mice): 210 mg/kg
LD50 oral (guinea pigs): 10 mg/kg
Its toxicity in humans should be very low,and a health hazard may arise only fromits severe irritant action. Studies on miceshowed that it caused skin tumors at the siteof application. Its carcinogenicity on humansis not reported. No exposure limit is set forperoxyacetic acid in air.
Brandgefahr
Decomposes violently at 230F. When heated to decomposition, Peroxyacetic acid emits acrid smoke and fumes. Runoff to sewer may create a fire or explosion hazard. Powerful oxidizer. Isolate from other stored material, particularly accelerators, oxidizers, and organic or flammable materials. Avoid shock and heat. Hazardous polymerization may not occur.
Flammability and Explosibility
Peracetic acid explodes when heated to 110 °C, and the pure compound is extremely
shock sensitive. Virtually all peracids are strong oxidizing agents and decompose
explosively on heating. Moreover, most peracids are highly flammable and can
accelerate the combustion of other flammable materials if present in a fire. Fires
involving peracetic acid can be fought with water, dry chemical, or halon
extinguishers. Containers of peracetic acid heated in a fire may explode.
Landwirtschaftliche Anwendung
Fungicide, Herbicide, Nematicide, Rodenticide,
Microbiocide: This compound is used as bactericide and fungicide,
especially in food processing, a reagent in making caprolactam
and glycerol; an oxidant for preparing epoxy compounds;
a bleaching agent; a sterilizing agent; and a polymerization
catalyst for polyester resins. Not approved for use in EU
countries. Registered for use in the U.S. and Canada.
Handelsname
DESOXON 1®; ESTOSTERIL®; OSBON
AC®; OXYMASTER®; PROXITANE®
Sicherheitsprofil
Poison by ingestion. Moderately toxic by inhalation and skin contact. A corrosive eye, sktn, and mucous membrane irritant. Questionable carcinogen with experimental tumorigenic data by skin contact. Flammable liquid. Severe explosion hazard when exposed to heat or by spontaneous chemical reaction. Explodes violently at 1 10°C. A powerful oxidizing agent. Explosive reaction with acetic anhydride, 5-p-chlorophenyl-2,2-dimethyl-3hexanone. Violent reaction with ether solvents (e.g., tetrahydrofuran, diethyl ether), metal chloride solutions (e.g., calcium chloride, potassium chloride, sodium chloride), olefins, organic matter. Dangerous; keep away from combustible materials. When heated to decomposition it emits acrid smoke and irritating fumes. To fight fire, use water, foam, CO2. Used as a polymerization initiator, curing agent, and cross-linhng agent. See also PEROXIDES, ORGANIC.
Environmental Fate
Routes and pathways, and relevant physicochemical properties
(e.g., solubility, Pow, Henry constant,.)
Melting point ? 0.2 °C.
Log Kow ? 1.07.
Solubility: very soluble in ether, sulfuric acid, and ethanol;
miscible with water 1.0 × 10
6 mg l1 at 25 °C.
Henry’s law constant ? 2.14 × 106 atm-m3 mol1 at 25 °C
Environmental persistency (degradation/speciation)
Peracetic acid is formed naturally in the environment through
a series of photochemical reactions involving formaldehyde and
photo oxidant radicals. The pKa of peracetic acid is 8.2, indicating
that this compound exists partially in anion form in the environment,
and anions generally do not adsorb more strongly to
soils containing organic carbon and clay than their neutral counterparts.
It degrades in the environment very quickly but has no
potential to bioaccumulate. Its ultimate fate in the environment is
in the basic molecules of carbon dioxide, oxygen, and water.
Bioaccumulation and biomagnification
An estimated BCF of 3 was calculated in fish for peracetic acid,
using an estimated log Kow of -1.07 and a regression-derived
equation. The BCF suggests that the potential for bioconcentration
in aquatic organisms is low.
Lager
Reactions involving large quantities
of peracids should be carried out behind a safety shield. Peracetic acid should be
used only in areas free of ignition sources and should be stored in tightly sealed
containers in areas separate from oxidizable compounds and flammable substances.
Other commonly available peracids, such as perbenzoic acid and m-chloroperbenzoic
acid (MCPBA), are less toxic, less volatile, and more easily handled than peracetic
acid.
Inkompatibilitäten
Peracids such as peracetic acid are strong oxidizing agents and react exothermically
with easily oxidized substrates. In some cases the heat of reaction can be sufficient to
induce ignition, at which point combustion is accelerated by the presence of the
peracid. Violent reactions may potentially occur, for example, with ethers, metal
chloride solutions, olefins, and some alcohols and ketones. Shock-sensitive peroxides
may be generated by the action of peracids on these substances as well as on
carboxylic anhydrides. Some metal ions, including iron, copper, cobalt, chromium,
and manganese, may cause runaway peroxide decomposition. Peracetic acid is also
reportedly sensitive to light.
Waste disposal
Excess peracetic acid and waste material containing this substance should be placed
in an appropriate container, clearly labeled, and handled according to your
institution's waste disposal guidelines. Peracids may be incompatible with other
flammable mixed chemical waste; for example, shock-sensitive peroxides can be
generated by reaction with some ethers such as THF and diethyl ether.
Peroxyessigsäure ...% Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
2-Chloropyridine-N-oxide
2-CHLORO-4-METHOXY-3-METHYLPYRIDINE
BLEACHEDSTARCH
Cefaclor monohydrate
Hexan-6-olid
1,2-Epoxyhexan
2-ACETAMIDO-4-NITROPYRIDINE-N-OXIDE
Oxfendazol
1-Epoxyethyl-3,4-epoxy-cyclohexan
2-AMINO-4-NITROPYRIDINE-N-OXIDE
1,2-Epoxycyclooctan
Octansäure
2,3-Epoxy-1-propanol
Glycerol
2-CHLORO-3-METHYL-4-NITROPYRIDINE N-OXIDE
(1R,4S,4aS,5R,6R,7S,8S,8aR)1,2,3,-4,10,10-Hexachlor-6,7-epoxy-1,4,-4a,5,6,7,8,8a-octahydro-1,4:5,8-dimethanonaphthalin
3,5-DIFLUORO-PYRIDIN-4-YLAMINE
N-(4-NITROPYRIDIN-2-YL)ACETAMIDE
4-AMINO-5-CHLOROTHIOPHENE-2-CARBOXYLIC ACID METHYL ESTER
TRICHLOROETHYL 6-(PHENYLACETAMIDO)PENICILLANATE S-OXIDE
4-NITRO-PYRIDIN-2-YLAMINE
4-AMINO-3-FORMYLPYRIDINE
Tazobactam acid
4-METHOXY-3-METHYLPYRIDIN-2-AMINE
2-AMINO-4-METHOXYPYRIDINE-3-CARBOXYLIC ACID
2,2,2-Trichloroethyl3-methyl-8-oxo-7-(2-phenylacetamido)-5-thia-1-azabicydo[4.2.0]oct-2-ene-2-carboxylate
5-CHLORO-4-NITROTHIOPHENE-2-CARBOXYLIC ACID
Ethyl-2-[4-[(6-chlorbenzoxazol-2-yl)oxy]phenoxy]propionat
2-CHLORO-3-METHYL-4-METHOXYPYRIDINE N-OXIDE
Hexyloxiran
16,17-Epoxy-3,17-dihydroxyestra-1,3,5(10)-triene-3,17-diacetate
2-Chlor-4-nitropyridin-1-oxid
δ-Valerolacton
