polyethyleneimine
|
|
|
- CAS-Nr.
- 25987-06-8
- Englisch Name:
- polyethyleneimine
- Synonyma:
- Polyaziridine;ene imine poL;JACS-25987-06-8;BRANCHED POLYMER;Polyethylenimine;MDG Polyethyleneimine;Polyethylenimine solution;Polyethylenimine 25987-06-8;Ethylenediamine,ethyleneiminepolymer;Ethylenediamine-ethylenimine polymer
- CBNumber:
- CB5499238
- Summenformel:
- C4H13N3
- Molgewicht:
- 103.17
- MOL-Datei:
- 25987-06-8.mol
|
polyethyleneimine Eigenschaften
- Dichte
- 1.08 g/mL at 25 °C
- Dampfdruck
- 9 mm Hg ( 20 °C)
- Brechungsindex
- n20/D 1.5240
- Flammpunkt:
- >230 °F
- Löslichkeit
- Chloroform (Sparingly), DMSO (Sparingly), Methanol (Slightly)
- Aggregatzustand
- Oil
- Farbe
- Colourless
- InChI
- InChI=1S/C2H8N2.C2H5N/c3-1-2-4;1-2-3-1/h1-4H2;3H,1-2H2
- InChIKey
- SFLOAOINZSFFAE-UHFFFAOYSA-N
- SMILES
- C(N)CN.C1NC1
- EPA chemische Informationen
- 1,2-Ethanediamine, polymer with aziridine (25987-06-8)
polyethyleneimine Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R22:Gesundheitsschädlich beim Verschlucken.
R36:Reizt die Augen.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
Chemische Eigenschaften
Polyethylenimines (PEI) are low to high molecular weight compounds with the general formula -[CH2-CH2-NH2]-, made by ring opening polymerization of aziridine. These polymers are available as linear, partly branched or repetitively branched polymers (dendrimers). The linear form contains only primary amines in the backbone whereas branched PEI also contains secondary and tertiary amines. Thus, these polymers have different properties and reactivities. Linear high MW PEI is usually solid at room temperature while branched PEIs are typically liquids at all molecular weights. All three forms are soluble in water, methanol, ethanol, and chloroform but insoluble in solvents of low polarity such as benzene, ethyl ether, and acetone.
Verwenden
Polyethyleneimine is a synthetic, water soluble, linear or branched polymer that has a high density of amino groups that can be protonated. At physiological pH, the polycation is very effective in binding to DNA and can mediate the transfection of eukaryotic cells. It is widely used in gene delivery system due to the ability to build a complex with DNA and support the release of endosomal through “proton sponge effect.” It is also facilitating the intracellular transport into nucleus. These properties succeed in polymer for MNPs coating and targeted therapy.
polyethyleneimine Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
polyethyleneimine Anbieter Lieferant Produzent Hersteller Vertrieb Händler.
Global( 126)Lieferanten
25987-06-8()Verwandte Suche:
Imipenem
Phthalimid
1,2-Diaminoethan
Imipenem-Cilastatin sodium hydrate
Pyrrol
Poly(ethylene)
Dicyclohexylcarbodiimid
Natrium-[[α,α'-(ethylendiimino)bis[2-hydroxybenzol-1-acetato]](4-)]ferrat(1-)
1,1'-(Methylendi-p-phenylen)bismaleimid
Tetranatriumethylendiamintetra-acetat
Dinatrium-[[N,N'-ethylenbis[N-(carboxymethyl)glycinato]](4-)-N,N',O,O',ON,ON']manganat(2-)
Dikaliumdihydrogenethylendiamintetraacetat
Natriumferedetat
N,N'-1,2-Ethandiylbis(N-(carboxymethyl)glycin,Dinatrium-Salz
Edetinsure
1-[(2-Chlorophenyl)-N-(methylimino)methyl]cyclopentanol hydrochloride
Rhodium
Platin
- PolyethyleniMine, ethylenediaMine branched average Mw ~800 by LS, average Mn ~600 by GPC
- Polyethylenimine, ethylenediamine branched
- POLYETHYLENIMINE LOW MOLECULAR WEIGHT
- 1,2-Ethanediamine,polymerwithaziridine
- Polyethylenimine, branched average Mw ~800 by LS, average Mn ~600 by GPC
- Polyethylenimine solution
- Polyethylenimine, epichlorohydrin modified solution
- BRANCHED POLYMER
- POLYETHYLENIMINE, LOW MOLECULAR WEIGHT, 50 WT. % SOLUTION IN WATER
- POLYETHYLENIMINE, LOW MOLECULAR WEIGHT, WATER-FREE
- POLYETHYLENIMINE, AVERAGE MN CA. 1,200, 50 WT. % SOLUTION IN WATER
- POLYETHYLENIMINE, HIGH MOLECULAR WEIGHT, 50 WT. % SOLUTION IN WATER
- Ethylenediamine,ethyleneiminepolymer
- Aziridine-1,2-diaminoethane copolymer
- Ethylenediamine-ethylenimine copolymer
- Ethylenediamine-ethylenimine polymer
- Polyethylenimine
- Polyethyleneimine on silica gel, 40-200 mesh
- Polyethyleneimine on silica gel, benzylated, 40-200 mesh
- Polyethylenimine, ethylenediamine end-capped
- Aziridine, polymer with 1,2-ethanediamine
- N'-[2-[2-[2-(2-aminoethylamino)ethyl-[2-[bis(2-aminoethyl)amino]ethyl]amino]ethyl-[2-[2-[bis(2-aminoethyl)amino]ethylamino]ethyl]amino]ethyl]ethane-1,2-diamine
- MDG Polyethyleneimine
- JACS-25987-06-8
- Polyethylenimine (Branched) (Technical Grade)
- ene imine poL
- Polyethylenimine ISO 9001：2015 REACH
- Polyethylenimine 25987-06-8
- Polyaziridine
- N1,N1-bis(2-aminoethyl)-N2-(2-((2-aminoethyl)amino)ethyl)-N2-(2-((2-((2-aminoethyl)amino)ethyl)(2-((2-(bis(2-aminoethyl)amino)ethyl)amino)ethyl)amino)ethyl)ethane-1,2-diamine
- Polyethylenimine, branched(700-900g/mol)
- 25987-06-8
- 9002-98-6/25987-06-8
- 8200-00-1
- C2H8N2nC2H5Nn
- Amine-Functional Polymers
- Hydrophilic Polymers
- Materials Science
- Polymer Science
- Polymers
- amine series
- Amine-Functional Polymers
- Hydrophilic Polymers
- Polymer Science
