Dihydrogen-[orthoborato(3-)-O]phenylmercurat(2-) Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R28:Sehr giftig beim Verschlucken.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
Chemische Eigenschaften
Phenylmercuric borate occurs as colorless, shiny flakes or as a white
or slightly yellow, odorless, crystalline powder.
Vorbereitung Methode
Phenylmercuric borate may be prepared by heating mercuric borate
with benzene or by evaporating to dryness, under vacuum, an
alcoholic solution containing equimolar proportions of phenylmercuric
hydroxide and boric acid.
Pharmazeutische Anwendungen
Phenylmercuric borate is used as an alternative antimicrobial
preservative to phenylmercuric acetate or phenylmercuric nitrate. It
is more soluble than phenylmercuric nitrate and has also been
reported to be less irritant than either phenylmercuric acetate or
phenylmercuric nitrate.
Sicherheit(Safety)
Phenylmercuric borate is mainly used as an antimicrobial preservative
in topical pharmaceutical formulations. A number of
adverse reactions to mercury-containing preservatives have been
reported; see Phenylmercuric Nitrate.
Although phenylmercuric borate is an irritant, it has been
reported to be less so than either phenylmercuric acetate or phenylmercuric nitrate.(1) There is, however, some cross-sensitization
potential with other mercurial preservatives.
Systemic absorption has been reported following regular use of a
hand disinfectant soap containing 0.04% phenylmercuric borate,
resulting in an increase in the estimated total daily body load of
mercury from 30–100 mg per 24 hours.
Lager
As for other phenylmercuric salts; see Phenylmercuric Nitrate.
Solutions may be sterilized by autoclaving.
Phenylmercuric borate should be stored in a well-closed
container, protected from light, in a cool, dry place.
Inkompatibilitäten
Incompatible with: halides; anionic emulsifying agents and
suspending agents; tragacanth; starch; talc; sodium metabisulfite;
sodium thiosulfate; disodium edetate; silicates; aluminum and other
metals; amino acids; ammonia and ammonium salts; sulfur
compounds; rubber; and some plastics.
Phenylmercuric acetate is reported to be incompatible with
cefuroxime and ceftazidime.
Regulatory Status
Included in nonparenteral medicines licensed in Europe. Included in
the Canadian List of Acceptable Non-medicinal Ingredients
(ophthalmic, nasal and otic preparations up to 0.004%; there
must be no other suitable alternative preservative).
In Europe, use is limited to eye makeup and eye makeup remover
at not more than 0.007% mercury alone or in combination with
other permitted mercurial substances.In France, a maximum
concentration of up to 0.01% is permitted for use in pharmaceutical
formulations. Prohibited from use in cosmetic products in Canada.
Prohibited in antimicrobial diaper rash drug products in the USA.
Limited use in Japan (see Phenylmercuric Nitrate).
Dihydrogen-[orthoborato(3-)-O]phenylmercurat(2-) Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
