Antimontrifluorid Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R51/53:Giftig für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
S-Sätze Betriebsanweisung:
S7:Behälter dicht geschlossen halten.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
Chemische Eigenschaften
Antimony trifluoride is a noncombustible,
odorless, white to gray crystalline solid.
Verwenden
To catalyze fluorinations by HF, manufacture of chlorofluorides, in dyeing, usually in form of double salts, e.g., antimony sodium fluoride or antimony fluoride and ammonium sulfate double salt, manufacture of pottery and porcelains.
Allgemeine Beschreibung
Antimony trifluoride solution is the white to gray crystalline solid dissolved in water. Antimony trifluoride is corrosive to metals and tissue. Antimony trifluoride is used in ceramics and to make other chemicals.
Air & Water Reaktionen
Water slowly hydrolyzes antimony fluoride to form antimony (III) oxide. The dry powdered oxide ignites on heating in air [Mellor Vol. 9 425.1939].
Reaktivität anzeigen
ANTIMONY TRIFLUORIDE is a colorless, solid compound, toxic and corrosive. When heated to decomposition, Antimony trifluoride emits very toxic fumes of fluoride and metallic antimony [Lewis, 3rd ed., 1993, p. 83].
Hazard
Strong irritant to eyes and skin.
Health Hazard
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Brandgefahr
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
Sicherheitsprofil
Poison by
subcutaneous route. Corrosive to skin and
eyes. See also FLUORIDES and
ANTIMONY COMPOUNDS. When
heated to decomposition it emits very toxic
fumes of Fand Sb
mögliche Exposition
It is used in dyeing; to make porcelain
and pottery; and as a fluorinating agent.
Versand/Shipping
UN1549 Antimony compounds, inorganic, solid,
n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials,
Technical Name Required.
läuterung methode
It crystallises from MeOH to remove oxide and oxyfluoride, then it is sublimed under vacuum in an aluminium cup on to a water-cooled copper condenser. Its solubility is 443g/100g in H2O at 20o and 562g/100g in H2O at 30o with partial hydrolysis. [Woolf J Chem Soc 279 1955, Kwasnik in Handbook of Preparative Inorganic Chem (Ed. Brauer) Academic Press Vol I p 199 1963].
Inkompatibilitäten
Hot perchloric acid.
Waste disposal
Consult with environmental
regulatory agencies for guidance on acceptable disposal
practices. Generators of waste containing this contaminant
(≥100 kg/mo) must conform with EPA regulations governing
storage, transportation, treatment, and waste disposal.
Antimontrifluorid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
