POLYIMIDE RESIN

POLYIMIDE RESIN Struktur
62929-02-6
CAS-Nr.
62929-02-6
Englisch Name:
POLYIMIDE RESIN
Synonyma:
Matrimid 5218;XU 293;BTDA-DAPI;Polyimides;Polyimideresins;POLYIMIDE RESIN;polyimide P84NT;polyimide matrimid;POLYIMIDE RESIN POWDER;BTDA-diaminophenylindane
CBNumber:
CB8731898
Summenformel:
C35H28N2O7
Molgewicht:
588.60602
MOL-Datei:
62929-02-6.mol

POLYIMIDE RESIN Eigenschaften

Schmelzpunkt:
>300°C
Dichte
1.2
Flammpunkt:
>93°(199°F)
Aggregatzustand
Powder
Wichte
1.2
Farbe
Yellow
Wasserlöslichkeit
Insoluble in water.
EPA chemische Informationen
1,3-Isobenzofurandione, 5,5'-carbonylbis-, polymer with 1(or 3)-(4-aminophenyl)-2,3-dihydro-1,3,3(or 1,1,3)-trimethyl-1H-inden-5-amine (62929-02-6)
Sicherheit
  • Risiko- und Sicherheitserklärung
  • Gefahreninformationscode (GHS)
TSCA  Yes
Bildanzeige (GHS) GHS hazard pictograms
Alarmwort
Gefahrenhinweise
Code Gefahrenhinweise Gefahrenklasse Abteilung Alarmwort Symbol P-Code
H315 Verursacht Hautreizungen. Hautreizung Kategorie 2 Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" /> P264, P280, P302+P352, P321,P332+P313, P362
H319 Verursacht schwere Augenreizung. Schwere Augenreizung Kategorie 2 Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" /> P264, P280, P305+P351+P338,P337+P313P
H335 Kann die Atemwege reizen. Spezifische Zielorgan-Toxizität (einmalige Exposition) Kategorie 3 (Atemwegsreizung) Warnung GHS hazard pictogramssrc="/GHS07.jpg" width="20" height="20" />
Sicherheit
P261 Einatmen von Staub vermeiden.
P304+P340 BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen.
P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P405 Unter Verschluss aufbewahren.

POLYIMIDE RESIN Chemische Eigenschaften,Einsatz,Produktion Methoden

Verwenden

Polyimides (PI, also known by alternative brand names: Pyralin Apical, Kapton, and Kaptrex) are polymers made of imide monomers (two carbonyl groups bonded to nitrogen). It has a density of 1430 kg/m3, Young’s modulus 3200 MPa, tensile strength (75–90) MPa, glass transition temperature > 400℃, thermal conductivity of 0.53 W/(m K), and a low relative dielectric constant of 2.9. Polyimides have applications similar to BCBs and also find applications as a low dielectric constant material in high-frequency interconnects (low-k material). The higher thermal conductivity and high glass transition temperature when compared to other types of insulating polymers also makes them a good choice where heat dissipation is important or other applications requiring good thermal management or low parasitic capacitances. Microchannels and high-frequency microdevices embedded in both photosensitive and nonphotosensitive polyimides have been fabricated and reported.

Industrielle Verwendung

Available both as thermoplastic and thermosetresins, polyimides (PIs) are a family of someof the most heat- and fire-resistant polymersknown. Moldings and laminates are generallybased on thermoset resins, although some aremade from thermoplastic grades. Unlike mostplastics, polyimides are available as laminatesand shapes, molded parts, and stock shapesfrom some materials producers. Thin-film products— enamel, adhesives, and coatings — areusually derived from thermoplastic polyimideresins.
Polyimide parts and laminates can serve continuouslyin air at 260°C; service temperaturefor intermittent exposure can range from cryogenicto as high as 482°C. Glass-fiber-reinforcedversions retain over 70% of their flexuralstrength and modulus at 249°C. Creep is almostnonexistent, even at high temperatures, anddeformation under load (27.2 MPa) is less than0.05% at room temperature for 24 h.
These materials have good wear resistanceand low coefficients of friction, both of whichare further improved by polytetrafluoroethylenefillers. Self-lubricating parts containing graphitepowders have flexural strengths above 68MPa, which is considerably higher than thoseof typical thermoplastic bearing compounds.
Electrical properties of polymide moldingsare outstanding over a wide range of temperatureand humidity conditions.

POLYIMIDE RESIN Upstream-Materialien And Downstream Produkte

Upstream-Materialien

Downstream Produkte


POLYIMIDE RESIN Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global( 79)Lieferanten
Firmenname Telefon E-Mail Land Produktkatalog Edge Rate
Hebei Mojin Biotechnology Co., Ltd
+8613288715578
sales@hbmojin.com China 12456 58
Hebei Saisier Technology Co., LTD
+86-18400010335 +86-13102810335
admin@hbsaisier.cn China 747 58
Henan Tianfu Chemical Co.,Ltd.
+86-0371-55170693 +86-19937530512
info@tianfuchem.com China 21691 55
Hubei xin bonus chemical co. LTD
86-13657291602
linda@hubeijusheng.com CHINA 22968 58
Shandong chuangyingchemical Co., Ltd.
18853181302
sale@chuangyingchem.com CHINA 5909 58
Shanghai Longyu Biotechnology Co., Ltd.
+8615821988213
info@longyupharma.com China 2531 58
Chongqing Chemdad Co., Ltd
+86-023-61398051 +8613650506873
sales@chemdad.com China 39916 58
Shaanxi Dideu Medichem Co. Ltd
+86-029-81138252 +86-18789408387
1057@dideu.com China 3537 58
Zhengzhou Alfa Chemical Co.,Ltd
+8618530059196
sale04@alfachem.cn China 12468 58
Hefei TNJ Chemical Industry Co.,Ltd.
0551-65418671
sales@tnjchem.com China 34572 58

62929-02-6()Verwandte Suche:


  • -2,3-dihydro-1,3,3(or1,1,3)-trimethyl-1h-inden-5-amine
  • 3-isobenzofurandione,5,5’-carbonylbis-polymerwith1(or3)-(4-aminophenyl)
  • POLYIMIDE RESIN
  • Polyimideresins
  • Polyimides
  • 1,3-Isobenzofurandione, 5,5-carbonylbis-, polymer with 1(or 3)-(4-aminophenyl)-2,3-dihydro-1,3,3(or 1,1,3)-trimethyl-1H-inden-5-amine
  • 5(6)-Amino-1-(4-anilino)-1,3,3-tetramethylindan-benzophenonetetracarboxylic
  • PolyiMide filM, 0.025MM thick x 20MM width
  • Polyimide, 0.025mm thick x 20mm width
  • POLYIMIDE RESIN POWDER
  • POLYIMIDE RESIN ISO 9001:2015 REACH
  • Matrimid 5218
  • BTDA-DAPI
  • BTDA-diaminophenylindane
  • Poly(1-(4-aminophenyl)-2,3-dihydro-1,3,3-trimethyl-1H-inden-5-amine-alt-5,5-carbonylbis[1,3-isobenzofurandione])
  • Poly(3-(4-aminophenyl)-2,3-dihydro-1,1,3-trimethyl-1H-inden-5-amine-alt-5,5-carbonylbis(1,3-isobenzofurandione)
  • Poly(3,3',4,4'-benzophenonetetracarboxylic dianhydride-alt-diaminophenylindane)
  • polyimide matrimid
  • XU 293
  • polyimide P84NT
  • 62929-02-6
Copyright 2019 © ChemicalBook. All rights reserved