Chinese Japanese Germany Korea


History, Occurrence and Uses Physical Properties Production Reactions
Titanium structure
Chemical Name:
Ti;Rod;t40;t60;75a;T 40;ti40;ti60;vt1l;Titan
Molecular Formula:
Formula Weight:
MOL File:

Titanium Properties

Melting point:
1660 °C (lit.)
Boiling point:
3287 °C (lit.)
4.5 g/mL at 25 °C (lit.)
Flash point:
storage temp. 
no restrictions.
Specific Gravity
42.0 μΩ-cm, 20°C
Water Solubility 
Insoluble in water.
Stable. Dust is thought to be spontaneously flammable, and may form an explosive mixture with air. Flammable solid. Incompatible with mineral acids, halogens, carbon dioxide, strong oxidizing agents.
CAS DataBase Reference
7440-32-6(CAS DataBase Reference)
EPA Substance Registry System
Titanium (7440-32-6)

Mechanical Properties

Modulus of Elasticity
116 GPa
Poissons Ratio
Shear Modulus
43.0 GPa, calculated
Hardness, Vickers
Hardness, Brinell
70, electrolytic Ti
  • Risk and Safety Statements
Signal word  Danger
Hazard statements  H228-H252-H251-H250
Precautionary statements  P235+P410-P280a-P407-P413a-P420-P240-P241-P370+P378b-P222-P231-P422-P210-P280-P335+P334-P370+P378-P302+P334-P370+P378a
Hazard Codes  F,Xi
Risk Statements  20/21/22-11-17-36/38
Safety Statements  16-36/37/39-33-27-26-6-43
RIDADR  UN 2878 4.1/PG 3
WGK Germany  3
RTECS  XR1700000
Autoignition Temperature 860 °F
HazardClass  4.2
PackingGroup  III
HS Code  81089020
NFPA 704
1 2

Titanium price More Price(154)

Manufacturer Product number Product description CAS number Packaging Price Updated Buy
Sigma-Aldrich 266019 Titanium wire, diam. 0.127 mm, 99.99% trace metals basis 7440-32-6 300mg $263 2021-12-16 Buy
Sigma-Aldrich 1.12379 Titanium fine powder 98+ 7440-32-6 250 g $322.82 2021-12-16 Buy
Sigma-Aldrich 266035 Titanium wire, diam. 1.0 mm, 99.99% trace metals basis 7440-32-6 100cm $361 2021-12-16 Buy
Sigma-Aldrich GF86399106 Titanium tube, 500mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+% 7440-32-6 1 ea $721 2021-12-16 Buy
Sigma-Aldrich GF29374005 Titanium mesh, 100x100mm, nominal aperture 4.3mm, wire diameter 1.5mm, 4.4x4.4 wires/inch, open area 94%, platinized diamond mesh 7440-32-6 1 ea $967 2021-12-16 Buy

Titanium Chemical Properties,Uses,Production

History, Occurrence and Uses

Titanium was discovered in 1790 by English chemist William Gregor. Five years later in 1795, Klaproth confirmed Gregor’s findings from his independent investigation and named the element titanium after the Latin name Titans, the mythical first sons of the Earth. The metal was prepared in impure form first by Nilson and Pettersson in 1887. Hunter, in 1910, prepared the metal in pure form by reducing titanium tetrachloride with sodium.
Titanium occurs in nature in the minerals rutile( TiO2), ilmenite (FeTiO3), geikielite, (MgTiO3) perovskite (CaTiO3) and titanite or sphene (CaTiSiO4(O,OH,F)). It also is found in many iron ores. Abundance of titanium in the earth’s crust is 0.565%. Titanium has been detected in moon rocks and meteorites. Titanium oxide has been detected in the spectra of M-type stars and interstellar space.
Titanium is found in plants, animals, eggs, and milk.
Many titanium alloys have wide industrial applications. Titanium forms alloys with a number of metals including iron, aluminum, manganese, and molybdenum. Its alloys are of high tensile strength, lightweight, and can withstand extreme temperatures. They are used in aircraft and missiles. The metal also has high resistance to sea water corrosion and is used to protect parts of the ships exposed to salt water. Also, titanium is used to combine with and remove traces of oxygen and nitrogen from incandescent lamps. Titanium compounds, notably the dioxide and the tetrachloride, have many uses (See Titanium Dioxide and Titanium Tetrachloride.)

Physical Properties

White lustrous metal; ductile when free of oxygen; low density high strength metal.
Titanium has two allotropic modifications: (1) alpha form and (2) beta modification. The alpha form has a close-packed hexagonal crystal structure; density 4.54 g/cm3 at 20°C and stable up to 882°C. It converts very slowly to a body-centered cubic beta form at 882°C. The density of the beta form is 4.40 g/cm3 at 900°C (estimated). The other physical properties are as follows: The metal melts at 1,610 ±10°C; vaporizes at 3,287°C; electrical resitivity 42 microhm-cm; modulus of elasticity 15.5x106 psi at 25°C; tensile strength, ultimate 34,000 psi (at 25°C); tensile strength yield 20,000 psi (at 25°C); Vickers hardness 80-100; surface tension at the melting point 1427dynes/cm3; superconductivity below 1.73°K; thermal neutron absorption cross section 5.8 barns; insoluble in water; soluble in dilute acids.


The production of titanium always encounters difficulties because of a tendency to react with oxygen, nitrogen and moisture at elevated temperatures. Most high purity elemental titanium can be produced by the Kroll process from titanium tetrachloride. The tetrachloride is reduced with magnesium in a mild steel vessel at about 800°C under an inert atmosphere of helium or argon. The net reaction is as follows:
TiCl4 + 2Mg → Ti + 2 MgCl2
The reaction is highly exothermic providing heat needed to maintain high temperature required for reaction. The Kroll process is applied commercially to produce elemental titanium.
Sodium metal can be used instead of magnesium in thermally reducing titanium tetrachloride.
Titanium metal also can be produced by electrolytic methods. In electrolysis, fused mixtures of titanium tetrachloride or lower chlorides with alkaline earth metal chlorides are electrolyzed to produce metal. Also, pure titanium can be prepared from electrolysis of titanium dioxide in a fused bath of calcium-, magnesiumor alkali metal fluorides. Other alkali or alkaline metal salts can be substituted for halides in these fused baths. Other titanium compouds that have been employed successfully in electrolytic titanium production include sodium fluotitanate and potassium fluotitanate.
Very highly pure titanium metal can be prepared in small amounts by decomposition of pure titanium tetraiodide, (TiI4) vapor on a hot wire under low pressure (Van Arkel–de Boer method).


Titanium metal is very highly resistant to corrosion. It is unaffected by atmospheric air, moisture and sea water, allowing many of its industrial applications. The metal burns in air at about 1,200°C incandescently forming titanium dioxide TiO2. The metal also burns on contact with liquid oxygen. Titanium forms four oxides, all of which have been well described. It forms a weakly basic monoxide, TiO; a basic dititanium trioxide, Ti2O3; the amphoteric dioxide, TiO2; and the acidic trioxide, TiO3.
Titanium combines with nitrogen at about 800°C forming the nitride and producing heat and light. It is one of the few elements that burns in nitrogen. Titanium reacts with all halogens at high temperatures. It reacts with fluorine at 150°C forming titanium tetrafluoride, TiF4. Reaction with chlorine occurs at 300°C giving tetrachloride TiCl4. Bromine and iodine combine with the metal at 360°C forming their tetrahalides.
Water does not react with Ti metal at ambient temperatures, but tianium reacts with steam at 700°C forming the oxide and hydrogen:
Ti + 2H2O → TiO2 + 2H2
Titanium is soluble in hot concentrated sulfuric acid, forming sulfate. It also reacts with hydrofluoric acid forming the fluoride.
Nitric acid at ordinary temperatures does not react with Ti metal, but hot concentrated nitric acid oxidizes titanium to titanium dioxide.
The metal is stable with alkalies.
Titanium combines with several metals, such as, iron, copper, aluminum, chromium, cobalt, nickel, lead and tin at elevated temperatures forming alloys.


Titanium was discovered by the Reverend William Gregor in 1791, and is named after the ‘Titans’ of Greek mythology. The metal was not isolated in a pure state until 1910, and useful quantities were not available for industrial applications until 1946, when an economical purification process was developed.

Chemical Properties

Titanium is a silvery metal or dry, dark-gray amorphous, lustrous powder.

Physical properties

Positioned at the top of group 4 (IVB), titanium heads up a group of metals sometimesreferred to as the “titanium group.” Members of this group have some similar properties.Titanium’s density is 4.5 g/cm3, which makes it heavier than aluminum but not as heavy asiron. Its melting point is high at 1,660°C, and its boiling point is even higher at 3287°C.Titanium metal is harder than steel but much lighter and does not corrode in seawater,which makes it an excellent alloy metal for use in most environmental conditions. It is alsoparamagnetic, which means that it is not responsive to magnetic fields. It is not a very goodconductor of heat or electricity.


There are 23 known isotopes of titanium. All but five are radioactive, rangingfrom Ti-38 to Ti-61, and have half-lives varying from a few nanoseconds to a few hours.The percentages of the five stable isotopes found in nature are as follows: 46Ti = 8.25%,47Ti = 7.44%, 48Ti = 73.72%, 49Ti = 5.41%, and 50Ti = 5.18%.

Origin of Name

It was named after “Titans,” meaning the first sons of the Earth as stated in Greek mythology.


Titanium is the ninth most abundant element found in the Earth’s crust, but not in pureform. It is found in two minerals: rutile, which is titanium dioxide (TiO2), and ilmenite(FeTiO3). It is also found in some iron ores and in the slag resulting from the productionof iron. The mineral rutile is the major source of titanium production in the United States.Although titanium is widely spread over the crust of the Earth, high concentrations of itsminerals are scarce. In the past it was separated from it ores by an expensive process ofchemical reduction that actually limited the amount of metal produced. A two-step processinvolves heating rutile with carbon and chlorine to produce titanium tetrachloride—TiO2+ C + 2Cl2 ?→ TiCl4 + CO2—which is followed by heating the titanium tetrachloridewith magnesium in an inert atmosphere: TiCl4 + 2Mg ?→ Ti + 2 MgCl2. As recently as theyear 2000, a method of electrolysis was developed using titanium tetrachloride in a bath ofrare-earth salts. This process can be used on a commercial scale that makes the productionof titanium much less expensive. Titanium was, and still is, a difficult element to extractfrom its ore.Titanium is found throughout the universe and in the stars, the sun, the moon, and themeteorites that land on Earth.


As the first element in group 4, titanium has characteristics similar to those of the othermembers of this group: Zr, Hf, and Rf. Titanium is a shiny, gray, malleable, and ductile metalcapable of being worked into various forms and drawn into wires.


In 1791 Reverend William Gregor (1761–1817), an amateur mineralogist, discoveredan odd black sandy substance in his neighborhood. Because it was somewhat magnetic, hecalculated that it was almost 50% magnetite (a form of iron ore). Most of the remainder ofthe sample was a reddish-brown powder he dissolved in acid to produce a yellow substance.Thinking he had discovered a new mineral, he named it “menachanite,” after the Menachanregion in Cornwall where he lived. During this period, Franz Joseph Muller (1740–1825) alsoproduced a similar substance that he could not identify. In 1793 Martin Heinrich Klaproth(1743–1817), who discovered several new elements and is considered the father of modernanalytical chemistry, identified the substance that Gregor called a mineral as a new element.Klaproth named it “titanium,” which means “Earth” in Latin.


Given titanium’s lightness, strength, and resistance to corrosion and high temperatures, itsmost common use is in alloys with other metals for constructing aircraft, jet engines, and missiles. Its alloys also make excellent armor plates for tanks and warships. It is the major metalused for constructing the stealth aircraft that are difficult to detect by radar.Titanium’s noncorrosive and lightweight properties make it useful in the manufacture oflaboratory and medical equipment that will withstand acid and halogen salt corrosion. Thesesame properties make it an excellent metal for surgical pins and screws in the repair of brokenbones and joints.It has many other uses as an abrasive, as an ingredient of cements, and as a paint pigmentin the oxide form and in the paper and ink industries, in batteries for space vehicles, andwherever a metal is needed to resist chlorine (seawater) corrosion.


As alloy with copper and iron in titanium bronze; as addition to steel to impart great tensile strength; to aluminum to impart resistance to attack by salt solutions and by organic acids; to remove traces of oxygen and nitrogen from incandescent lamps. Surgical aid (fracture fixation).


Titanium is added to steel and aluminumto enhance their tensile strength and acidresistance. It is alloyed with copper and ironin titanium bronze.

Production Methods

Titanium is the ninth most abundant element and accounts for about 0.63% of the Earth’s crust. Analyses of rock samples from the moon indicate that titanium is far more abundant there; some lunar rocks consist of 12% titanium by weight. World production of titanium sponge metal was estimated at 69,000 metric tons in 1991. The most important titaniumbearing minerals are ilmenite, rutile, and leucoxene. Ilmenite (FeTiO3) is found in beach sands (Australia, India, and Florida) and in rock deposits associated with iron (Norway and Finland). Ilmenite accounts for about 91%of the world’s consumption of titanium minerals and world resources of anatase, ilmenite, and rutile total more than 2 billion tons. Rutile (a form ofTiO2) is less abundant; its chief source is certain Australian beach sands. Two other less prominent forms of TiO2 exist, anatase and brookite. The ores vary around the world in TiO2 content from 39% to 96%. Anatase is used as a food color.


A silvery transition metal that occurs in various ores as titanium(IV) oxide and also in combination with iron and oxygen. It is extracted by conversion of titanium(IV) oxide to the chloride, which is reduced to the metal by heating with sodium. Titanium is reactive at high temperatures. It is used in the aerospace industry as it is strong, resistant to corrosion, and has a low density. It forms compounds with oxidation states +4, +3, and +2, the +4 state being the most stable. Symbol: Ti; m.p. 1660°C; b.p. 3287°C; r.d. 4.54 (20°C); p.n. 22; r.a.m. 47.867.

General Description

TITANIUM is a gray lustrous powder. TITANIUM can be easily ignited and burns with an intense flame. The very finely powdered material may be ignited by sparks.

Air & Water Reactions

Highly flammable. Pyrophoric in dust form [Bretherick 1979, p. 104]. Titanium is water-reactive at 700C, releasing hydrogen, which may cause an explosion [Subref: Mellor, 1941, vol. 7, 19].

Reactivity Profile

TITANIUM reacts violently with cupric oxide and lead oxide when heated. When titanium is heated with potassium chlorate, potassium nitrate, or potassium permanganate, an explosion occurs [Mellor 7:20. 1946-47]. The residue from the reaction of titanium with red fuming nitric acid exploded violently when the flask was touched [Allison 1969]. Liquid oxygen gives a detonable mixture when combined with powdered titanium, [Kirchenbaum 1956].


Almost all of titanium’s compounds, as well as the pure metal when in powder form, areextremely flammable and explosive. Titanium metal will ignite in air at 1200°C and willburn in an atmosphere of nitrogen. Titanium fires cannot be extinguished by using water orcarbon dioxide extinguishers. Sand, dirt, or special foams must be used to extinguish burningtitanium.

Health Hazard

Inhalation of metal powder may cause coughing,irritation of the respiratory tract, anddyspnea. Intramuscular administration of titaniumin rats caused tumors in blood. Animalcarcinogenicity is not fully established.Human carcinogenicity is not known.

Health Hazard

Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution.

Fire Hazard

Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated.

Safety Profile

Questionable carcinogen with experimental tumorigenic data. Experimental reproductive effects. The dust may ignite spontaneously in air. Flammable when exposed to heat or flame or by chemical reaction. Titanium can burn in an atmosphere of carbon dioxide, nitrogen, or air. Also reacts violently with BrF3, CuO, PbOx (Ni + KClO3), metaloxy salts, halocarbons, halogens, CO2, metal carbonates, Al, water, AgF, O2 , nitryl fluoride, HNO3,O2, KClO3, KNO3 , KMnO4, steam @ 704°, trichloroethylene, trichlorotrifluoroethane. Ordinary extinguishers are often ineffective against titanium fires. Such fires require special extinguishers designed for metal fires. In airtight enclosures, titanium fires can be controlled by the use of argon or helium. Titanium, in the absence of moisture, burns slowly, but evolves much heat. The application of water to burning titanium can cause an explosion. Finely dwided titanium dust and powders, like most metal powders, are potential explosion hazards when exposed to sparks, open flame, or high-heat sources. See also TITANIUM COMPOUNDS, POWDERED METALS, and MAGNESIUM.

Potential Exposure

Titanium metal, because of its low weight, high strength, and heat resistance, is used in the aerospace and aircraft industry as tubing, fittings, fire walls; cowlings, skin sections; jet compressors; and it is also used in surgical appliances. It is used, too, as controlwire casings in nuclear reactors, as a protective coating for mixers in the pulp-paper industry and in other situations in which protection against chlorides or acids is required; in vacuum lamp bulbs and X-ray tubes; as an addition to carbon and tungsten in electrodes and lamp filaments; and to the powder in the pyrotechnics industry. It forms alloys with iron, aluminum, tin, and vanadium, of which ferrotitanium is especially important in the steel industry. Other titanium compounds are utilized in smoke screens, as mordants in dyeing; in the manufacture of cemented metal carbides; as thermal insulators; and in heat resistant surface coatings in paints and plastics.

Environmental Fate

Titanium is poorly absorbed by plants and animals and is retained to only a certain extent. High levels of titanium in food products can be detects, however, when soil is contaminated by fly-ash fallout or titanium-containing sewage residues and when titanium dioxide is used as a food whitener. Food, which is considered to be the most important source of exposure to titanium, contributes >99% of the daily intake of the element. There are no relevant tolerable intakes for titanium against which to compare estimated dietary intake. Typical diets may contain approximately 0.3–0.5 mg titanium.
Titanium content of soil generally ranges from 0.3 to 6%, high levels of which are found in the vicinity of power plants because of combustion of coal.
Titanium concentrations in the atmosphere are comparatively low. Annual average concentrations in urban air are mostly <0.1 mgm-3 and they are lower still in rural air. Air concentrations up to 0.5 mgm-3 have been reported in urban and industrialized areas.


UN2546 Titanium powder, dry, Hazard Class: 4.2; Labels: 4.2-Spontaneously combustible material.

Toxicity evaluation

Many data indicate that titanium is absorbed poorly from the gastrointestinal tract in human beings. It is likely that transferrin may act as a specific carrier of titanium ions and may play a central role during the transport and biodistribution of soluble titanium species throughout the organism. Titanium concentrations found generally in urine suggest an absorption of <5%, assuming a daily intake of at least 300 mg.


Powder and dust may ignite spontaneously in air. Violent reactions occur on contact with water, steam, halocarbons, halogens, and aluminum. The dry powder is a strong reducing agent; Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause firesor explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.

Titanium Preparation Products And Raw materials

Raw materials

Preparation Products

Titanium Suppliers

Global( 150)Suppliers
Supplier Tel Fax Email Country ProdList Advantage
career henan chemical co
+86-0371-55982848 China 29954 58
Hubei Jusheng Technology Co.,Ltd.
027-59599243 CHINA 28229 58
Hubei xin bonus chemical co. LTD
027-59338440 CHINA 23035 58
0371-55170695 CHINA 26742 58
13806087780 +86 13806087780 CHINA 17384 58
15377521700 +8615377521700
027-81302088 CHINA 869 58
Shaanxi Dideu Medichem Co. Ltd
18192503167 +86-29-89586680
+86-29-88380327 CHINA 9938 58
Zhuoer Chemical Co., Ltd
+86-21-58816016 CHINA 3014 58
Henan Alfa Chemical Co., Ltd
+8619139973225;; China 12083 58
Mainchem Co., Ltd. +86-0592-6210733
+86-0592-6210733 CHINA 32439 55

Related articles

View Lastest Price from Titanium manufacturers

Image Release date Product Price Min. Order Purity Supply Ability Manufacturer
2022-01-19 TI
2019-09-02 TITANIUM
US $1.00 / KG 1KG 85.0-99.8% 200kg Career Henan Chemical Co

7440-32-6(Titanium)Related Search:

Copyright 2017 © ChemicalBook. All rights reserved