ChemicalBook
Chinese Japanese Germany

Creatine

General description Physical and Chemical Properties Production method Pharmacological effects Uses Side Effects
Creatine
Creatine
CAS No.
57-00-1
Chemical Name:
Creatine
Synonyms
Creatin;Kreatin;cretine;CREATINE;Krebiozon;CREATINE(P);Creatine HMB;N-aminosarcosine;N-AMIDINOSARCOSIN;CreatineAnhydrous
CBNumber:
CB3674978
Molecular Formula:
C4H9N3O2
Formula Weight:
131.13
MOL File:
57-00-1.mol

Creatine Properties

Melting point:
~295 °C (dec.)
Boiling point:
242.43°C (rough estimate)
Density 
1,33 g/cm3
refractive index 
1.5700 (estimate)
storage temp. 
Store at RT.
pka
2.63(at 25℃)
Water Solubility 
Soluble in water.
Merck 
14,2568
BRN 
907175
InChIKey
CVSVTCORWBXHQV-UHFFFAOYSA-N
CAS DataBase Reference
57-00-1(CAS DataBase Reference)
NIST Chemistry Reference
Glycine, N-(aminoiminomethyl)-N-methyl-(57-00-1)
EPA Substance Registry System
Glycine, N-(aminoiminomethyl)-N-methyl- (57-00-1)
SAFETY
  • Risk and Safety Statements
  • Hazard and Precautionary Statements (GHS)
Hazard Codes  Xi
Risk Statements  36/37/38
Safety Statements  26-36
WGK Germany  3
TSCA  Yes
HS Code  29252900
Hazardous Substances Data 57-00-1(Hazardous Substances Data)
Symbol(GHS):
Signal word:
Hazard statements:
Code Hazard statements Hazard class Category Signal word Pictogram P-Codes
H315 Causes skin irritation Skin corrosion/irritation Category 2 Warning P264, P280, P302+P352, P321,P332+P313, P362
H319 Causes serious eye irritation Serious eye damage/eye irritation Category 2A Warning P264, P280, P305+P351+P338,P337+P313P
H335 May cause respiratory irritation Specific target organ toxicity, single exposure;Respiratory tract irritation Category 3 Warning
Precautionary statements:
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P304+P340 IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
P405 Store locked up.

Creatine price More Price(6)

Manufacturer Product number Product description CAS number Packaging Price Updated Buy
Sigma-Aldrich C0780 Creatine anhydrous 57-00-1 50g $67.5 2018-11-13 Buy
Sigma-Aldrich C0780 Creatine anhydrous 57-00-1 10mg $22.4 2018-11-13 Buy
Alfa Aesar A17477 Creatine, anhydrous, 98% 57-00-1 25g $27.6 2018-11-13 Buy
Alfa Aesar A17477 Creatine, anhydrous, 98% 57-00-1 100g $76.2 2018-11-13 Buy
Sigma-Aldrich C0780 Creatine anhydrous 57-00-1 100g $122 2018-11-13 Buy

Creatine Chemical Properties,Uses,Production

General description

Creatine is a kind of natural nutrients in presented in the human body and can also be synthesize through arginine, glycine, and methionine in the liver, kidney and pancreas: in the presence of the catalysis of the arginine/glycine transamidinase in the kidney, the amidino group of the arginine can be transferred to the amino group of the glycine, generating glycocyamine. Then in the liver, with the catalysis of the glycocyamine methyltransferase, the methyl group of the S-adenosylmethionine can be transferred to the glycocyamine, generating creatine; it can increase the water content of the muscle cells, help the muscle cells to store energy, increase the protein synthesis and some other fundamental functions; wherein the artificially synthetic creatine can be used as the nutritional supplements for promoting the adaptation of skeletal muscle on fierce exercise and fighting against the excessive fatigue of individual in weakness; it can also be used for making the drugs for the treatment of heart disease and respiratory insufficiency; it can be used for making the pharmaceutical formulation containing human growth hormones; it can be applied to the compound health food, with anti-aging and physical power-recovering effect.

Physical and Chemical Properties

It is prismatic crystals (containing one crystal water molecule) with the melting point being 303 ℃ and the relative density of 1.33. It is soluble in boiling water and 98% acetic acid, slightly soluble in ethanol but insoluble in diethyl ether and butyrate. It can react with inorganic acid to obtain creatinine and co-heat with total soda lime to generate methylamine. It can be used to generate ammonia when being subject to azeotrope with potassium hydroxide and can react with potassium permanganate to generate methyl guanidine oxalic acid and guanidine; at room temperature, its aqueous solution can react with mercuric acetate role to generate guanidino glyoxylic acid, finally generating oxalic acid and guanidine In the reaction of the self-digestion in the muscle juice or organ extract, it can be converted to creatinine.

Production method

1. For taking lime nitrogen as raw materials for preparing creatine, there are three different process routes:
Lime nitrogen has direct reaction with the aqueous solution of sodium sarcosine to generate creatine.
Lime nitrogen is reacted with the methanol solution pre-saturated with dry hydrogen chloride gas to generate O-methylisourea hydrochloride which is further subject to reaction with sarcosine to generate creatine.
Upon the condition of passing air, lime nitrogen was reacted with aqueous hydrochloric acid to generate chlorinated formamidine chloride which further reacts with sarcosine sodium to generate creatine.
2. Cyanamide is reacted with chloroacetic acid, methylamine to generate creatine monohydrate.
3. Take thiourea and dimethyl sulfate as raw materials to generate S-methylisothiourea sulfate which then have reaction with sarcosine, sodium sarcosine or potassium sarcosine to generate creatine.
4. Take urea and dimethyl sulfate as raw materials to generate O-methyl isourea sulfate which then reacts with sodium sarcosine to generate creatine monohydrate.

Figure 1 The reaction formula for production of creatine
Operation method: add 3.3 mol of urea and 6 mL 50% H2SO4 to a 500 mL four-necked flask equipped with a stirrer, a thermometer, a dropping funnel and a condenser; heat to 40 ℃, add drop wise of 3 mol dimethyl sulfate under stirring for 3 h; during the addition of raw materials, the temperature should be maintained at less than 70 ℃; after the completion of adding the material, stir for 2h about 70 ℃, and cool to obtain 561.8 g of O-methyl isourea sulfate. Add 61.7 of 36% aqueous solution of sodium sarcosinate to a 500 mL four-necked flask equipped with a stirrer, a thermometer, a dropping funnel and a condenser, use 30% HCl to adjust the pH to about 11.0, and then add drop wise at 20 ℃ of 50 g of O-methyl isourea sulfate within 2 h; during the process of adding, drop wise, use 25% NaOH solution to adjust the pH and maintain the pH at about 11.0, after the addition was complete, stirring was continued at 40 ℃ for 2 h, and then cool the mixture at 0 ~5℃ for 2h and filter out the formed colorless crystals. Use 2 × 15 mL of ice water to wash the filter cake to generate crude creatine monohydrate. Put the crude product into beaker, add water of 7 to 8 times the amount of crude product, heat to dissolve all the crude product, have liquid be subject to slow cooling at room temperature, crystallized, filter off the crystals, dry at a temperature below 50 ℃ to obtain the finished product of creatine monohydrate .

Pharmacological effects

1. Increase the water content of muscle cells:
During the initial stage of using creatine, you can feel obviously that the muscles can become larger and stronger. This is because creatine leads to that the body's muscle cells store a relatively large amount of water; and when all the muscle cells absorb large amounts of water and get increased volume, the muscle will certainly become more full, visible.
2. Help the muscle cells to store energy:
Human muscle fiber contains two different forms of creatine: non-bonded creatine and phosphate-containing creatine phosphate; among them, creatine phosphate accounts for about two-thirds of the total creatine content. When muscle gets contraction for exercise, the body will use a compound called ATP as the energy source. Unfortunately, the body's muscle cells can only support the ATP energy which is enough for only less than ten seconds rapid contraction. Therefore, more ATP must be produced in order to maintain continuous movement. At this time, the creatine phosphate stored in muscle will sacrifice their phosphoric acid group for biosynthesis of ATP again. Therefore, if the muscles contain more creatine, the muscle will have greater potential for exert its strength.
In addition, the supplement of the creatine can also help the exhausted muscles cells to rejuvenate. This is because when the muscle ATP energy is depleted, the body can use glycolysis pathway to produce lactic acid. When the body undergoes fierce exercise, a large number of lactic acid can be produced to make the muscles get soreness and fatigue; at this time if the muscle can store relative large amount of creatine phosphate for providing more ATP, the body will reduce the lactic acid manufacturing and reduce fatigue of muscle cells so that we can exercise more durable and more explosive.
3. Increase the biosynthesis of proteins:
The uptake of creatine makes the body be able to use more protein for muscle growth. Moreover, the two proteins in the muscle structure; actin and myosin, is exactly the main component to lead to muscle fiber contraction and movement. Therefore, if we can supplement sufficient amount of creatine for our bodies, our body can reduce the energy consumed for protein synthesis so that we can have more energy to synthesize large amount of actin and myosin cells, therefore, our muscle will certainly become stronger and more powerful.

Uses

1. It can be used as the nutritional supplements for promoting the adaptation of skeletal muscle to strenuous exercise and fighting against the excessive fatigue for feeble individuals.
2. It can be used as the drugs for the treatment of heart disease and respiratory insufficiency.
3. It can be used for preparation of a pharmaceutical formulation containing human growth hormone.
4. It can be applied to compound health food with anti-aging and physical-power recovering effect.
5. It can be used as the reagents for biochemical research.

Side Effects

1. Byproducts
Low-purity creatine not only has no apparent effect, but also is harmful to the human body. The major harmful substance is a derivatives called dicyandiamide. It will increase the burden of renal excretion. In the product of creatine of 99.99% purity, the dicyandiamide content is less than 20PPM.
2. Energy Source
The movement of the human muscles relies on the energy decomposed by adenosine triphosphate (ATP]. In high-intensity exercise, ATP will be totally depleted within a few seconds exploded, meaning it can only provide a few seconds of energy. In the aerobic exercise, it can be synthesized from the aerobic decomposition of carbohydrates and fats. But in anaerobic exercise, due to the lack of oxygen, creatine began to be involved to energy metabolism. It can combine with phosphoric acid to synthesize creatine phosphate (CP) and quickly replenish ATP. Theoretically, the more the creatine is stored, the more the synthesis of CP will be and the longer time the ATP can be supplied. In that case, the muscle can persist for a longer time at high-intensity exercise. In the recovering period, the synthesis of creatine still relies on carbohydrates for aerobic energy supplying. Therefore, the intake of carbohydrates should not be too small. Otherwise, after the decomposition of creatine, it can’t be synthesized and can’t supply the energy in the next training.
3. Danger
Because the creatine can quickly supplement energy, there may be overtraining phenomenon during the exercise.

Chemical Properties

White powder

Purification Methods

Likely impurities are creatinine and other guanidino compounds. It crystallises from the minimum volume of boiling H2O as the monohydrate. The hydrate is also obtained by dissolving in H2O and adding Me2CO. Drying under vacuum over P2O5 or drying at 100o gives the anhydrous base. The anhydrous base can be obtained also by dissolving the hydrate in H2O, seeding with the anhydrous base and cooling in ice. A m of 258 -268o(dec) was reported. The picrate crystallises from 17 parts of H2O with m of 218-220o(dec). [King J Chem Soc 2377 1930, Hoffmann et al. J Am Chem Soc 58 1730 1936, Mendel & Hodgkin Acta Cryst 7 443 1954, Greenstein & Winitz The Chemistry of the Amino Acids J. Wiley, Vol 3 p 2750 1961, Beilstein 4 III 1170, 4 IV 2425.]

Creatine Preparation Products And Raw materials

Raw materials

Preparation Products


Creatine Suppliers

Global( 200)Suppliers
Supplier Tel Fax Email Country ProdList Advantage
Henan DaKen Chemical CO.,LTD.
+86-371-55531817
inquiry@dakenchem.com CHINA 22119 58
Henan Tianfu Chemical Co.,Ltd.
0371-55170693
0371-55170693 info@tianfuchem.com CHINA 20795 55
Mainchem Co., Ltd.
+86-0592-6210733
+86-0592-6210733 sales@mainchem.com CHINA 32764 55
Nanjing Finetech Chemical Co., Ltd.
025-85710122 17714198479
025-85710122 sales@fine-chemtech.com CHINA 894 55
Hefei TNJ Chemical Industry Co.,Ltd.
86-0551-65418684 18949823763
86-0551-65418684 info@tnjchem.com China 1465 55
Aminodiscovery Co., Ltd. +86 13853510897
+86 13853510897 996275813@qq.com;goldmeil@hotmail.com China 35 58
J & K SCIENTIFIC LTD. 400-666-7788 +86-10-82848833
+86-10-82849933 jkinfo@jkchemical.com;market6@jkchemical.com China 96815 76
future industrial shanghai co., ltd 400-0066-400;021-60496031
021-55660885 sales@jonln.com China 2042 65
Alfa Aesar 400-610-6006; 021-67582000
021-67582001/03/05 saleschina@alfa-asia.com China 30308 84
Energy Chemical 021-58432009 / 400-005-6266
021-58436166-800 info@energy-chemical.com China 44192 61

57-00-1(Creatine)Related Search:


Copyright 2017 © ChemicalBook. All rights reserved