SODIUM THIOPHENOXIDE
- CAS No.
- 930-69-8
- Chemical Name:
- SODIUM THIOPHENOXIDE
- Synonyms
- SODIUM THIOPHENOLATE;THIOPHENOL SODIUM SALT;Phenylthio;Sodiothiobenzene;Phenylthiosodium;SodiuM thiophenol;sodiumthiophenate;(Phenylthio) sodium;sodiumthiophenylate;sodiumphenylsulfide
- CBNumber:
- CB8359713
- Molecular Formula:
- C6H7NaS
- Molecular Weight:
- 134.17
- MDL Number:
- MFCD00066460
- MOL File:
- 930-69-8.mol
- MSDS File:
- SDS
| Product description | Number | Pack Size | Price |
| Sodium thiophenolate technical grade, 90% | 418293 | 10g | $105 |
| Sodium thiophenolate technical grade, 90% | 418293 | 50g | $305 |
| SodiumBenzenethiolate(technicalgrade,90%) | S930690 | 500mg | $45 |
| Thiophenolsodiumsalt 97% | MT-59469 | 250g | $300 |
| Melting point | >300 °C (lit.) |
|---|---|
| solubility | DMSO (Slightly), Methanol (Slightly, Sonicated) |
| form | Powder |
| color | Off-white to yellow to beige |
| Hydrolytic Sensitivity | 0: forms stable aqueous solutions |
| BRN | 3597302 |
| Stability | Hygroscopic |
| InChI | 1S/C6H6S.Na/c7-6-4-2-1-3-5-6;/h1-5,7H;/q;+1/p-1 |
| InChIKey | RZWQDAUIUBVCDD-UHFFFAOYSA-M |
| SMILES | [Na]Sc1ccccc1 |
| FDA UNII | 75GF5O2O8Y |
| EPA Substance Registry System | Benzenethiol, sodium salt (930-69-8) |
| UNSPSC Code | 12352100 |
| NACRES | NA.22 |
SAFETY
Risk and Safety Statements
| Symbol(GHS) |  GHS05 |
|---|---|
| Signal word | Danger |
| Hazard statements | H314 |
| Precautionary statements | P260-P280-P303+P361+P353-P304+P340+P310-P305+P351+P338-P363 |
| PPE | Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges |
| Hazard Codes | C |
| Risk Statements | 34 |
| Safety Statements | 26-36/37/39-45 |
| RIDADR | UN 1759 8/PG 3 |
| WGK Germany | 3 |
| F | 1-10-13 |
| TSCA | TSCA listed |
| HazardClass | 6.1(b) |
| PackingGroup | III |
| HS Code | 29309090 |
| Storage Class | 8A - Combustible corrosive hazardous materials |
| Hazard Classifications | Skin Corr. 1B |
| Hazardous Substances Data | 930-69-8(Hazardous Substances Data) |
| Limited Quantities | 5.0 L (1.3 gallons) (liquid) or 5.0 kg (11 lbs) (solid) |
| Excepted Quantities | Max Inner Pack (30g or 30ml) and Max Outer Pack (1Kg or 1L) |
SODIUM THIOPHENOXIDE Chemical Properties,Uses,Production
Preparation
Sodium thiophenolate is prepared by the following steps:A solution of (11) ( 1.0 g, 2.8 mmol), phenylthiol (0.33 g, 3.0 mmol), acetonitrile (5 cm3) and sodium carbonate (0.3 g) was stirred under reflux for 19 h. Water (20 cm3) was added, then the mixture extracted into DCM. The DCM solution was dried (MgS04) and evaporated to dryness. Chromatography on silica gel with DCM - hexane (30 : 70) as the eluent yielded 2,6-dibromo-3,5-difluoro-4-thiophenoxypyridine (0.9 g, 85%), m.p.65.5-66.5 OC (Found: C, 34.45; H, 1.3; N, 3.2. C11H5Bf2F2NS requires C, 34.7; H, 1.3; N, 3.7%); IR spectrum no. 16; mass spectrum no. 19; nmr spectrum no. 16.
Uses
Sodium thiophenolate has been used for the synthesis of MCoTI-I and MCoTI-II cyclotides, which are naturally-occurring cyclic cystine-knot microprotein trypsin inhibitors. It may be employed in the following studies:
- As probe for the immunoassay and for the detection of label-free protein by surface-enhanced Raman scattering (SERS).
- Preparation of new cyclometalated 6-phenyl-4-(p-R-phenyl)-2,2′-bipyridyl (C--N--N)Pt(II) thiophenolate complexes.
- Synthesis of 1,3,5,7,9-pentakis(4-methoxyphenylthio)corannulene, 1,3,5,7,9-pentakis(2-naphthylthio)corannulene and 1,3,6,8-tetrakis(4-methoxyphenylthio)corannulene.
- Synthesis of Et4N+ salts of homoleptic arylthiolate Ti(IV) complex, [Ti(SPh)6]2-.
General Description
Sodium thiophenolate can be prepared from the reaction of sodium and thiophenol in diethyl ether.
