エピクロロヒドリン樹脂 化学特性,用途語,生産方法
解説
エポキシ樹脂,1分子中にエポキシ基(オキシラン環)を2個以上含むプレポリマー,およびそれを硬化剤で硬化した樹脂の総称.大別すると,グリシジル型と非グリシジル型の二つに分かれる.おもにエピクロロヒドリンと多価フェノール類(ビスフェノールAなど)または多価アルコールとの反応,オレフィンのペルオキシ酸によるエポキシ化によって得られる生成物が用いられる.エポキシ化合物の製造は,たとえば,エピクロロヒドリンとビスフェノールを水酸化アルカリ存在下で反応させて行われる.硬化反応は有機ポリアミン,有機酸無水物,フェノール樹脂,ポリアミド樹脂などの硬化剤により,エポキシ基を開環させて行う.接着剤としてすぐれた特性を有し,注型品,積層材,ビニルポリマーの安定剤,コンクリートの改質剤などに用いられる.
説明
Resin based on epichlorohydrin and bis phenol A. Oligomers may vary in molecular weight from 340 and higher. May produce
erythema multiforme like eruptions. The higher the molecular weight, the less sensitizing the compound.
用途
用途は、金属との親和性のよいことから、塗料、金属接着剤に、あるいはガラス繊維や炭素繊維にエポキシ樹脂プレポリマー溶液を含浸させたあと、硬化させた電子機器用銅張り積層板、炭素繊維を用いた航空器材、ゴルフクラブのシャフトや釣り竿(ざお)などから、道路舗装、塩化ビニル樹脂の安定剤など多方面にわたっている。
化学的特性
Resin epoxy is white to straw slab
使用
Resin epoxy is Surface coatings, as on household appliances and gas storage vessels; adhesive for composites and for metals, glass, and ceramics; casting metalforming tools and dies; encapsulation of electrical parts; filament-wound pipe and pressure vessels; floor surf
定義
Resin epoxy is a thermosetting resin based on the reactivity of the epoxide group. One type is made from epichlorohydrin and bisphenol A. Aliphatic polyols such as glycerol may be used instead of the aromatic bisphenol A. Molecules of this type have glycidyl ether struc
製造方法
Epoxy resin is prepared by the following condensation reaction:
The condensation leaves epoxy end groups that are then reacted in a separate step with nucleophilic compounds (alcohols, acids, or amines). For use as an adhesive, the epoxy resin and the curing resin (usually an aliphatic polyamine) are packaged separately and mixed together immediately before use.
Epoxy novolac resins are produced by glycidation of the low-molecular-weight reaction products of phenol (or cresol) with formaldehyde. Highly cross-linked systems are formed that have superior performance at elevated temperatures.
製造
エポキシ樹脂は金属表面との親和性が優れているので、とくに金属の接着剤や塗料として用いられる。硬化の際に揮発性物質の発生や体積収縮が少なく、機械的性質や電気絶縁性が優れ、溶剤に侵されない。硬化物の最高使用温度は、エポキシ樹脂の種類と、各種の硬化剤の組合せで決まり、高いものは300℃くらいまでのものがある。加工方法は注型、封入、含浸後硬化、塗装、接着など多様にわたっている。
危険性
Strong skin irritant in uncured state.
エピクロロヒドリン樹脂 上流と下流の製品情報
原材料
準備製品