フェニル水銀(II)ニトラート 化学特性,用途語,生産方法
用途
殺菌剤、防かび剤
効能
抗菌薬
化学的特性
white crystalline powder
使用
Pharmaceutic aid (antimicrobial
agent).
調製方法
Phenylmercuric nitrate is readily formed by heating benzene with
mercuric acetate, and treating the resulting acetate with an alkali
nitrate.
一般的な説明
Lustrous scales decomposing at 187-190°C. Very slightly soluble in water. Used as an antiseptic, germicide, fungicide.
空気と水の反応
Very slightly soluble in water.
反応プロフィール
Strongly reactive with many other groups. Incompatible with acids and bases. Organometallics are good reducing agents and therefore incompatible with oxidizing agents. Often reactive with water to generate toxic or flammable gases. Generally highly toxic. Often react on contact with tissues to give toxic products.
健康ハザード
Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
火災危険
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Containers may explode when heated. Runoff may pollute waterways.
応用例（製薬）
Phenylmercuric salts are used as antimicrobial preservatives mainly
in ophthalmic preparations, but are also used in cosmetics, parenteral, and topical pharmaceutical formulations;
Phenylmercuric salts are active over a wide pH range against
bacteria and fungi and are usually used in neutral to alkaline
solutions, although they have also been used effectively at slightly
acid pH. In acidic formulations, phenylmercuric
nitrate may be preferred to phenylmercuric acetate or phenylmercuric
borate as it does not precipitate.
Phenylmercuric nitrate is also an effective spermicide, although
its use in vaginal contraceptives is no longer recommended;
A number of adverse reactions to phenylmercuric salts have been
reported, and concern at the toxicity of mercury compounds may preclude the use of phenylmercuric salts under certain circumstances;
安全性プロファイル
Poison by intravenous
route. FDA over-the-counter drug. When
heated to decomposition it emits very toxic
fumes of Hg and NOx. See also MERCURY
COMPOUNDS and NITRATES.
安全性
Phenylmercuric nitrate and other phenylmercuric salts have been
widely used as antimicrobial preservatives in parenteral and topical
pharmaceutical formulations. However, concern over the use of
phenylmercuric salts in pharmaceuticals has increased as a result of
greater awareness of the toxicity of mercury and other mercury
compounds. This concern must, however, be balanced by the
effectiveness of these materials as antimicrobial preservatives and
the low concentrations in which they are employed.
Phenylmercuric salts are irritant to the skin at 0.1% w/w
concentration in petrolatum.In solution, they may give rise to
erythema and blistering 6–12 hours after administration. In a
modified repeated insult patch test, a 2% w/v solution was found to
produce extreme sensitization of the skin.
Eye drops containing phenylmercuric nitrate as a preservative
should not be used continuously for prolonged periods as
mercurialentis, a brown pigmentation of the anterior capsule of
the lens may occur. Incidence is 6% in patients using eye drops for
greater than 6 years; however, the condition is not associated with
visual impairment.Cases of atypical band keratopathy have
also been attributed to phenylmercuric nitrate preservative in eye
drops.
Concern that the absorption of mercury from the vagina may be
harmful has led to the recommendation that phenylmercuric nitrate
should not be used in intravaginal formulations.
(mouse, IV): 27 mg/kg
(mouse, oral): 50 mg/kg
(rat, SC): 63 mg/kg
貯蔵
All phenylmercuric compound solutions form a black residue of
metallic mercury when exposed to light or after prolonged storage.
Solutions may be sterilized by autoclaving, although significant
amounts of phenylmercuric salts may be lost, hence reducing
preservative efficacy, owing to incompatibilities with packaging
components or other excipients, e.g. sodium metabisulfite.
Phenylmercuric nitrate should be stored in a well-closed
container, protected from light, in a cool, dry place.
不和合性
The antimicrobial activity of phenylmercuric salts may be reduced
in the presence of anionic emulsifying agents and suspending agents,
tragacanth, starch, talc, sodium metabisulfite,sodium thiosulfate,disodium edetate,and silicates (bentonite, aluminum
magnesium silicate, magnesium trisilicate, and kaolin).
Phenylmercuric salts are incompatible with halides, particularly
bromides and iodides, as they form less-soluble halogen compounds.
At concentrations of 0.002% w/v precipitation may not
occur in the presence of chlorides. Phenylmercuric salts are also
incompatible with aluminum and other metals, ammonia and
ammonium salts, amino acids, and with some sulfur compounds,
e.g. in rubber.
Phenylmercuric salts are absorbed by rubber stoppers and some
types of plastic packaging components; uptake is usually greatest to
natural rubbers and polyethylene, and least to polypropylene.
Incompatibilities with some types of filter membranes may also
result in loss of phenylmercuric salts following sterilization by
filtration.
規制状況(Regulatory Status)
Included in the FDA Inactive Ingredients Database (parenteral and
ophthalmic preparations). Included in parenteral products and eye
drops in the EU. Included in the Canadian List of Acceptable Nonmedicinal
Ingredients (ophthalmic, nasal and otic preparations only
up to 0.002%; there must be no other suitable alternative
preservative).
Prohibited in first aid antiseptic drug products, antimicrobial
diaper rash drug products and vaginal contraceptive drug products
in the USA. Limited uses permitted in Japan and the EU for
cosmetics.
フェニル水銀(II)ニトラート 上流と下流の製品情報
原材料
準備製品