2-Octyl cyanoacetate
2-Octyl cyanoacetate 物理性質
- 沸点 :
- 241.4±8.0 °C(Predicted)
- 比重(密度) :
- 0.951±0.06 g/cm3(Predicted)
- 貯蔵温度 :
- Sealed in dry,Room Temperature
- 酸解離定数(Pka):
- 2.94±0.10(Predicted)
安全性情報
- リスクと安全性に関する声明
- 危険有害性情報のコード(GHS)
絵表示(GHS) |
|
注意喚起語 |
|
危険有害性情報 |
コード |
危険有害性情報 |
危険有害性クラス |
区分 |
注意喚起語 |
シンボル |
P コード |
H302 |
飲み込むと有害 |
急性毒性、経口 |
4 |
警告 |
|
P264, P270, P301+P312, P330, P501 |
|
注意書き |
P264 |
取扱い後は皮膚をよく洗うこと。 |
P264 |
取扱い後は手や顔をよく洗うこと。 |
P270 |
この製品を使用する時に、飲食または喫煙をしないこ と。 |
P301+P312 |
飲み込んだ場合:気分が悪い時は医師に連絡する こと。 |
P330 |
口をすすぐこと。 |
P501 |
内容物/容器を...に廃棄すること。 |
|
2-Octyl cyanoacetate 価格
メーカー |
製品番号 |
製品説明 |
CAS番号 |
包装 |
価格 |
更新時間 |
購入 |
2-Octyl cyanoacetate 化学特性,用途語,生産方法
化学的特性
Colorless to light yellow liquid
使用
2-octyl cyanoacrylate is one of the most commonly used, commercially-available wound adhesives. Current indications include all easily approximated wounds from surgical incisions or properly cleaned lacerations from trauma in areas that are dry and have minimal friction. It additionally was approved for use in combination with subcuticular sutures for deeper or higher tension wounds.
製造方法
2-Octyl cyanoacetate was obtained by direct esterification of cyanoacetic acid with octan-2-ol in a 1:1 molar ratio in the presence of two/three drops of 2% concentrated sulphuric acid as a catalyst and toluene as solvent, to allow for the azeotropic removal of the reaction water.
2-Octyl cyanoacetate 上流と下流の製品情報
原材料
準備製品
2-Octyl cyanoacetate 生産企業
Global( 128)Suppliers
52688-08-1()キーワード:
- 52688-08-1
- Octan-2-yl 2-cyanoacetate
- Acetic acid, cyano-, 1-methylheptyl ester
- 1-Methylheptyl cyanoacetate
- sec-Octyl cyanoacetate
- Cyanoacetic acid isooctyl ester
- 2-OCTYL CYANOACETATE 98.0+%
- 2-cyanodecanoate
- 2-OCTYL CYANOACETATE
- 2-OCYA
- cyanoacetic acid 1-methylheptyl ester
- Acetic acid, 2-cyano-, 1-methylheptyl ester
- Cyanoacetic acid 1-methylheptyl ester 52688-08-1