1,2,4,5-シクロヘキサンテトラカルボン酸二無水物 化学特性,用途語,生産方法
外観
白色～ほとんど白色粉末～結晶
化学的特性
White to Almost white powder to crystal.
使用
1,2,4,5-Cyclohexanetetracarboxylic dianhydride can be used as organic synthesis intermediates and pharmaceutical intermediates, mainly used in laboratory research and development and chemical and pharmaceutical production processes.
主な応用
HPMDA can be used to synthesize polyesters that have four branches (dianhydride is hydrolysed to four carboxylic acids) for multiple functionalities, such as biodegradability, bioimaging and photoactivity.
一般的な説明
1,2,4,5-Cyclohexanetetracarboxylic dianhydride (HPMDA) has a cyclohexane centre with two carboxylic anhydrides substituents sitting opposite to each other. HPMDA reacts with amines for polyimides or alternatively with alcohols for polyesters. The non-aromatic cyclohexane centre provides local excited state to the synthesized photochromic polyimides showing large contrast of the photo-switching effect (compared to fully aromatized polyimides). The polyimides derived from 1,2,4,5-cyclohexanetetracarboxylic dianhydride exhibit high proton conductivity (0.2 ± 0.01 S/cm at 298 K and 95% related humidity). Like other polyimides, the polyimides have excellent chemical and thermal resistance and are used in optical fibre claddings and substrates for microelectronics.
合成
In a 100 mL three-necked flask equipped with a thermometer, a magnetic stirrer, a water separator, and a condenser tube was added 9.64 g of hydrogenatedEthylbenzene tetracarboxylate, 1mL of concentrated sulfuric acid, 5mL of acetic acid and 50mL of xylene were heated to 130??C. During the reaction, the reaction temperature was maintained at reflux, and the reaction continuously removed water for 5 hours. , cooling down to room temperature, suction filtration, filter cake washed with acetone, dried at room temperature under reduced pressure to give white solid 1,2,4,5-cyclohexane tetracarboxylic acid anhydride 4.80g, yield: 82.8%.
Advantages
Alicyclic acid anhydrides have been used as raw materials for functional polyimides and functional epoxy resins. Among them, 1,2,4,5-cyclohexanetetracarboxylic dianhydride is used as a raw material for polyimide resins exhibiting particularly good heat resistance, solvent solubility, thermoplasticity, low water absorption, dimensional stability, and like.
1,2,4,5-シクロヘキサンテトラカルボン酸二無水物 上流と下流の製品情報
原材料
準備製品