ポリ(アクリル酸メチル),トルエン溶液

ポリ(アクリル酸メチル),トルエン溶液 化学構造式
9003-21-8
CAS番号.
9003-21-8
化学名:
ポリ(アクリル酸メチル),トルエン溶液
别名:
ポリ(アクリル酸メチル),トルエン溶液;ポリアクリル酸メチル;ポリ(アクリル酸メチル) 溶液
英語名:
POLY(METHYL ACRYLATE)
英語别名:
PA-30;Polymethacrylates;Poly(methyleacrylate);METHYL ACRYLATE RESIN;METHYL ACRYLATE LATEX;POLY(METHYL ACRYLATE);Methylacrylate polymer;Methylacrylatehomopolymer;Polymethyl-acrylate paste;Poly(methyl 2-propenoate)
CBNumber:
CB8195335
化学式:
C4H6O2
分子量:
86.09
MOL File:
9003-21-8.mol

ポリ(アクリル酸メチル),トルエン溶液 物理性質

沸点 :
110 °C
比重(密度) :
1.22 g/mL at 25 °C
蒸気密度:
>1 (vs air)
屈折率 :
n20/D 1.494
闪点 :
40 °F
貯蔵温度 :
Flammables area
外見 :
液体
色:
クリア
EPAの化学物質情報:
2-Propenoic acid, methyl ester, homopolymer (9003-21-8)
安全性情報
  • リスクと安全性に関する声明
  • 危険有害性情報のコード(GHS)
主な危険性  F,Xn
Rフレーズ  11-38-48/20-63-65-67
Sフレーズ  36/37-46-62-16
RIDADR  UN 1294 3/PG 2
WGK Germany  2
自然発火温度 ~896 °F
HSコード  32082010
消防法 危-4-1-II
安衛法 有機溶剤中毒予防規則:第2種有機溶剤,57,57-2
PRTR法 1-300
絵表示(GHS) GHS hazard pictogramsGHS hazard pictogramsGHS hazard pictograms
注意喚起語 危険
危険有害性情報
コード 危険有害性情報 危険有害性クラス 区分 注意喚起語 シンボル P コード
H225 引火性の高い液体および蒸気 引火性液体 2 危険 GHS hazard pictograms P210,P233, P240, P241, P242, P243,P280, P303+ P361+P353, P370+P378,P403+P235, P501
H304 飲み込んで気道に侵入すると生命に危険のおそ れ 吸引性呼吸器有害性 1 危険 GHS hazard pictograms
H315 皮膚刺激 皮膚腐食性/刺激性 2 警告 GHS hazard pictograms P264, P280, P302+P352, P321,P332+P313, P362
H336 眠気やめまいのおそれ 特定標的臓器毒性、単回暴露; 麻酔作用 3 警告 P261, P271, P304+P340, P312,P403+P233, P405, P501
H373 長期にわたる、または反復暴露により臓器の障 害のおそれ 特定標的臓器有害性、単回暴露 2 警告 P260, P314, P501
注意書き
P210 熱/火花/裸火/高温のもののような着火源から遠ざ けること。-禁煙。
P261 粉じん/煙/ガス/ミスト/蒸気/スプレーの吸入を避ける こと。
P281 指定された個人用保護具を使用すること。
P301+P310 飲み込んだ場合:直ちに医師に連絡すること。
P331 無理に吐かせないこと。

ポリ(アクリル酸メチル),トルエン溶液 価格 もっと(3)

メーカー 製品番号 製品説明 CAS番号 包装 価格 更新時間 購入
関東化学株式会社(KANTO) 31069-1A ポリ(アクリル酸メチル),トルエン溶液
Poly(methyl acrylate), in toluene
9003-21-8 500mg ¥13700 2021-03-23 購入
Sigma-Aldrich Japan 182214 ポリ(アクリル酸メチル) 溶液 average Mw ~40,000 by GPC
Poly(methyl acrylate) solution average Mw ~40,000 by GPC
9003-21-8 50g ¥35800 2024-03-01 購入
Sigma-Aldrich Japan 182214 ポリ(アクリル酸メチル) 溶液 average Mw ~40,000 by GPC
Poly(methyl acrylate) solution average Mw ~40,000 by GPC
9003-21-8 100g ¥100000 2024-03-01 購入

ポリ(アクリル酸メチル),トルエン溶液 化学特性,用途語,生産方法

定義

本品は、アクリル酸メチルの重合体であり、次の化学式で表される。

解説

ポリアクリル酸メチル略称PMA.アクリル酸メチルを溶液重合,または乳化重合で得られる無色の無定形固体.ベンゼン,アセトン,酢酸エチルなどに可溶,エーテルには膨潤し,四塩化炭素や飽和炭化水素,アルコール類などに不溶.軟化点75 ℃,ガラス転移点3 ℃.300 ℃ 以上で分解する.アルカリによって加水分解する.ヒドラジンと反応し,種々の誘導体の原料になるほか,接着剤,塗料用に広く用いられる.繊維加工方面では補強,織物のり剤,不織布,バインダー用として利用され,紙加工や,合成ゴム,皮革加工にも用いられる.

化粧品の成分用途

皮膜形成剤

化学的特性

clear liquid

使用

PMA/methylamine borane (MeAB) composites, prepared by solution blending process finds uses as a hydrogen storage material with better dehydrogenation property compared to MeAB.

製造方法

The structure of methyl acrylate is H2C=CH-COOCH3. The monomer used to prepare poly(methyl acrylate) is produced by the oxidation of propylene. The resin is made by free-radical polymerization initiated by peroxide catalysts and has the following formula:
説明図
Poly(methyl acrylate) resins vary from soft, elastic, film-forming materials to hard plastics.

定義

ChEBI: An acrylate macromolecule composed of repeating methoxycarbonylethylene units.

調製方法

Prepared by the polymerization of acrylic and methacrylic acids or their esters, e.g. butyl ester or dimethylaminoethyl ester

安全性

Polymethacrylate copolymers are widely used as film-coating materials in oral pharmaceutical formulations. They are also used in topical formulations and are generally regarded as nontoxic and nonirritant materials.
Based on relevant chronic oral toxicity studies in rats and conventionally calculated with a safety factor of 100, a daily intake of 2–200 mg/kg body-weight depending on the grade of Eudragit may be regarded as essentially safe in humans.

貯蔵

Dry powder polymer forms are stable at temperatures less than 30°C. Above this temperature, powders tend to form clumps, although this does not affect the quality of the substance and the clumps can be readily broken up. Dry powders are stable for at least 3 years if stored in a tightly closed container at less than 30°C.
Dispersions are sensitive to extreme temperatures and phase separation occurs below 0°C. Dispersions should therefore be stored at temperatures between 5 and 25°C and are stable for at least 18 months after shipping from the manufacturer’s warehouse if stored in a tightly closed container at the above conditions.

純化方法

Precipitate it from a 2% solution in acetone by addition of water.

不和合性

Incompatibilities occur with certain polymethacrylate dispersions depending upon the ionic and physical properties of the polymer and solvent. For example, coagulation may be caused by soluble electrolytes, pH changes, some organic solvents, and extremes of temperature. For example, dispersions of Eudragit L 30 D, RL 30 D, L 100-55, and RS 30 D are incompatible with magnesium stearate. Eastacryl 30 D, Kollicoat MAE 100 P, and Kollicoat MAE 30 DP are also incompatible with magnesium stearate.
Interactions between polymethacrylates and some drugs can occur, although solid polymethacrylates and organic solutions are generally more compatible than aqueous dispersions.

規制状況(Regulatory Status)

Included in the FDA Inactive Ingredients Database (oral capsules and tablets). Included in nonparenteral medicines licensed in the UK. Included in the Canadian List of Acceptable Non-medicinal Ingredients.

ポリ(アクリル酸メチル),トルエン溶液 上流と下流の製品情報

原材料

準備製品


ポリ(アクリル酸メチル),トルエン溶液 生産企業

Global( 59)Suppliers
名前 電話番号 電子メール 国籍 製品カタログ 優位度
Hebei Mojin Biotechnology Co., Ltd
+8613288715578
sales@hbmojin.com China 12457 58
Hubei xin bonus chemical co. LTD
86-13657291602
linda@hubeijusheng.com CHINA 22968 58
Chongqing Chemdad Co., Ltd
+86-023-61398051 +8613650506873
sales@chemdad.com China 39916 58
Shaanxi Dideu Medichem Co. Ltd
+86-029-81138252 +86-18789408387
1057@dideu.com China 3635 58
Hebei Yanxi Chemical Co., Ltd.
+8617531190177
peter@yan-xi.com China 5993 58
Career Henan Chemica Co
+86-0371-86658258 15093356674;
laboratory@coreychem.com China 30255 58
Dideu Industries Group Limited
+86-29-89586680 +86-15129568250
1026@dideu.com China 29322 58
Alfa Chemistry
+1-5166625404
Info@alfa-chemistry.com United States 21317 58
Hebei Guanlang Biotechnology Co., Ltd.
+86-19930503259 +86-19930503259
cherry@crovellbio.com China 18457 58
Aladdin Scientific
+1-833-552-7181
sales@aladdinsci.com United States 52927 58

ポリ(アクリル酸メチル),トルエン溶液  スペクトルデータ(FT-IR)


9003-21-8(ポリ(アクリル酸メチル),トルエン溶液)キーワード:


  • 9003-21-8
  • 2-Propenoicacid,methylester,homopolymer
  • Poly(methyl acrylate) solution average Mw ~40,000 by GPC
  • Poly(methyleacrylate)
  • poly(methyl acrylate) macromolecule
  • Microparticles based on PMAA
  • Microparticles based on poly(methacrylic acid)
  • Methylacrylatehomopolymer
  • Polymethacrylates
  • POLY(METHYL ACRYLATE)
  • METHYL ACRYLATE LATEX
  • METHYL ACRYLATE RESIN
  • Polymethyl-acrylate paste
  • POLY(METHYL ACRYLATE), SOLUTION IN TOLUE NE, AVERAGE MW CA. 40,000 (GPC
  • POLY(METHYL ACRYLATE), SECONDARY STANDAR D (TOLUENE)
  • solutionintolueneaveragemwca.40000(gpc)
  • poly(methyl acrylate) solution
  • Polymethyl methacrylate,industrial grade
  • Polymethyl methacrylate,color
  • Polymethyl methacrylate,aero grade
  • Methyl 2-propenoate homopolymer
  • Poly(methyl acrylate), solution in toluene
  • POLY(METHYL ACRYLATE) ISO 9001:2015 REACH
  • Methylacrylate polymer
  • Poly(methyl 2-propenoate)
  • PA-30
  • ポリ(アクリル酸メチル),トルエン溶液
  • ポリアクリル酸メチル
  • ポリ(アクリル酸メチル) 溶液
Copyright 2017 © ChemicalBook. All rights reserved