말레산 무수물

말레산 무수물
말레산 무수물 구조식 이미지
카스 번호:
108-31-6
한글명:
말레산 무수물
동의어(한글):
말레산무수물;2,5-푸란디온;디히드로-2,5-디옥소푸란;말레산언하이드라이드;말레이산무수물;말레인무수물;시스-부텐디오익무수물;톡실릭무수물;무수말레인산(인도네시아);말레익안하이드라이드;말레산언하이드라이드;말레산 무수물
상품명:
CIS-BUTENEDIOIC ANHYDRIDE
동의어(영문):
MA;Maleic;MAN;MALIEC ANHYDRIDE;MALEIC ACID ANHYDRIDE;2,5-FURANDIONE;CIS-BUTENEDIOIC ANHYDRIDE;ANHYDRIDE MALEIC;Maleic anhydride,99%;MALEIC ANHYDRIDE 99.5%
CBNumber:
CB3188060
분자식:
C4H2O3
포뮬러 무게:
98.06
MOL 파일:
108-31-6.mol
MSDS 파일:
SDS

말레산 무수물 속성

녹는점
51-56 °C (lit.)
끓는 점
200 °C (lit.)
밀도
1.48
증기 밀도
3.4 (vs air)
증기압
0.16 mm Hg ( 20 °C)
굴절률
1.4688 (estimate)
인화점
218 °F
저장 조건
Store below +30°C.
용해도
클로로포름(약간 용해됨), 에틸아세테이트(약간 용해됨)
산도 계수 (pKa)
0[at 20 ℃]
물리적 상태
가루
색상
하얀색
수소이온지수(pH)
0.8 (550g/l, H2O, 20℃)Hydrolysis
냄새
약한 매운 냄새.
폭발한계
1.4-7.1%(V)
수용성
79g/100mL(25℃)
감도
Moisture Sensitive
Merck
14,5704
BRN
106909
Henry's Law Constant
(atm?m3/mol): Not applicable - reacts with water
노출 한도
NIOSH REL: TWA 1 ppm (0.25 mg/m3), IDLH 10 ppm; OSHA PEL: TWA 0.25 ppm; ACGIH TLV: TWA 0.25 ppm with an intended change of 0.1 ppm.
Dielectric constant
51.0(60℃)
안정성
안정적인. 타기 쉬운. 물, 강산화제, 알칼리 금속, 강염기, 아민, 가장 일반적인 금속, 중합 촉매 및 촉진제와 호환되지 않습니다.
InChIKey
FPYJFEHAWHCUMM-UHFFFAOYSA-N
LogP
-2.61 at 20℃
CAS 데이터베이스
108-31-6(CAS DataBase Reference)
NIST
2,5-Furandione(108-31-6)
EPA
Maleic anhydride (108-31-6)
안전
  • 위험 및 안전 성명
  • 위험 및 사전주의 사항 (GHS)
위험품 표기 C
위험 카페고리 넘버 22-34-42/43
안전지침서 22-26-36/37/39-45
유엔번호(UN No.) UN 2215 8/PG 3
WGK 독일 1
RTECS 번호 ON3675000
F 고인화성물질 21
자연 발화 온도 870 °F
TSCA Yes
HS 번호 2917 14 00
위험 등급 8
포장분류 III
유해 물질 데이터 108-31-6(Hazardous Substances Data)
독성 LD50 orally in Rabbit: 1090 mg/kg LD50 dermal Rabbit 2620 mg/kg
IDLA 10 mg/m3
기존화학 물질 KE-17314
그림문자(GHS): GHS hazard pictogramsGHS hazard pictogramsGHS hazard pictograms
신호 어: Danger
유해·위험 문구:
암호 유해·위험 문구 위험 등급 범주 신호 어 그림 문자 P- 코드
H302 삼키면 유해함 급성 독성 물질 - 경구 구분 4 경고 GHS hazard pictograms P264, P270, P301+P312, P330, P501
H314 피부에 심한 화상과 눈에 손상을 일으킴 피부부식성 또는 자극성물질 구분 1A, B, C 위험 GHS hazard pictograms P260,P264, P280, P301+P330+ P331,P303+P361+P353, P363, P304+P340,P310, P321, P305+ P351+P338, P405,P501
H317 알레르기성 피부 반응을 일으킬 수 있음 피부 과민성 물질 구분 1 경고 GHS hazard pictograms P261, P272, P280, P302+P352,P333+P313, P321, P363, P501
H334 흡입 시 알레르기성 반응, 천식 또는 호흡 곤란 등을 일으킬 수 있음 호흡기 과민성 물질 구분 1 위험 GHS hazard pictograms P261, P285, P304+P341, P342+P311,P501
H372 장기간 또는 반복 노출되면 장기(또는, 영향을 받은 알려진 모든 장기를 명시)에 손상을 일으킴 특정 표적장기 독성 - 반복 노출 구분 1 위험 GHS hazard pictograms P260, P264, P270, P314, P501
예방조치문구:
P260 분진·흄·가스·미스트·증기·...·스프레이를 흡입하지 마시오.
P280 보호장갑/보호의/보안경/안면보호구를 착용하시오.
P301+P312 삼켜서 불편함을 느끼면 의료기관(의사)의 진찰을 받으시오.
P303+P361+P353 피부(또는 머리카락)에 묻으면 오염된 모든 의복은 벗거나 제거하시오 피부를 물로 씻으시오/샤워하시오.
P305+P351+P338 눈에 묻으면 몇 분간 물로 조심해서 씻으시오. 가능하면 콘택트렌즈를 제거하시오. 계속 씻으시오.
NFPA 704
1
3 1

말레산 무수물 C화학적 특성, 용도, 생산

개요

말레산 무수물(MA)은 매우 불쾌한 냄새를 지닌 무색 액체입니다. 이것은 원료인 벤젠 또는 노멀부탄으로 구성된 화학적 중간 생성물입니다. 그 다운스트림 제품으로는 푸마르산, 말산과 숙신산 및 부탄디올이 있습니다. 이 제품들은 하나의 통합된 제조 과정을 통해 생산됩니다. 말레산 무수물은 액체와 고체 형태(파스틸, 브리케트 또는 플레이크)로 존재합니다.

용도

말레산 무수물의 대표적인 사용 영역을 보면, 불포화 폴리에스터 수지(UPR)의 제조가 전체의 약 50%를 차지합니다. 또한 용제, 접착제, 윤활제, 세제, 표면처리 첨가제 및 염료의 제조 시에도 사용됩니다.

포장, 보관 및 운송

도로용 탱크차 벌크、ISO 탱크 컨테이너 벌크.

개요

Maleic Anhydride (MAN) is an organic compound with the chemical formula C4H203. It is the acid anhydride of maleic acid and in its pure state it is a colourless or white solid with an acrid odour. Maleic anhydride is truly a remarkable molecule in that it possesses two types of chemical functionality making it uniquely useful in chemical synthesis and applications.
Maleic Anhydride
Maleic Anhydride is a multifunctional chemical intermediate with applications in several fields of chemical industry. Its major end use is as feedstock in the production of unsaturated polyester resins (UPR).
These resins are used both in glass-reinforced and in unreinforced applications. The UPR end uses includes a wide range of applications in construction, marine and automobile industries.
In addition, Maleic Anhydride can also be used as raw material in the production of 1,4-butanediol (BDO), gamma- butyrolactone and tetrahydrofuran (THF). It is important to highlight that BDO is one of the world's fastest growing chemicals in the last years.

화학적 성질

Maleic anhydride is colorless needles, white lumps, or pellets. Irritating, choking odor. Dissolves in water to produce maleic acid. Dissolves in ethanol and produces esters.

물리적 성질

White, hydroscopic crystals (usually shipped as briquettes). Odor threshold concentration is 0.32 ppm (quoted, Amoore and Hautala, 1983).

용도

Maleic Anhydride is heterocyclic compound used in the manufacture of unsaturated polyester resins. Maleic Anhydride has a wide range of other applications; it is used in synthetic tensides, insecticides, herbicides and fungicides.

생산 방법

Maleic anhydride was traditionally manufactured by the oxidation of benzene or other aromatic compounds. As of 2006, only a few smaller plants continue to use benzene; due to rising benzene prices, most maleic anhydride plants now use n-butane as a feedstock.
In both cases, benzene and butane are fed into a stream of hot air, and the mixture is passed through a catalyst bed at high temperature. The ratio of air to hydrocarbon is controlled to prevent the mixture from catching on fire. Vanadium pentoxide and molybdenum trioxide are the catalysts used for the benzene route, whereas vanadium and phosphorus oxides are used for the butane route.
2 CH3CH2CH2CH3 + 7 O2 → 2 C2H2(CO)2O + 8 H2O.

정의

ChEBI: Maleic anhydride is a cyclic dicarboxylic anhydride that is the cyclic anhydride of maleic acid. It has a role as an allergen. It is a cyclic dicarboxylic anhydride and a member of furans.

제조 방법

To a flask equipped with a Dean-Stark trap, condenser, and mechanical stirrer is added 116 gm (1.0 mole) of maleic acid and 120 ml of tetrachloroethane. The contents are heated, the water (18 ml, 1.0 mole) distilled off as the azeotrope, and the residue distilled under reduced pressure to afford 87.7 gm (89.5%) of the anhydride, b.p. 82-84°C (15 mm), m.p. 53°C. The residue remaining in the flask consists of about 10 gm of fumaric acid, m.p. 287°C.
Fumaric and maleic acids both give maleic anhydride on heating. Fumaric acid must first be heated to a higher temperature to effect its conversion to maleic acid prior to its dehydration.
Preparation of Maleic Anhydride

화학 반응

The chemistry of maleic anhydride is very rich, reflecting its ready availability and bifunctional reactivity. It hydrolyzes, producing maleic acid, cis-HOOC–CH=CH–COOH. With alcohols, the halfester is generated, e.g., cis-HOOC–CH=CH–COOCH3.
Maleic anhydride is a potent dienophile in Diels-Alder reactions. It is also a ligand for low-valent metal complexes, examples being Pt(PPh3)2(MA) and Fe(CO)4(MA).
Maleic anhydride dimerizes in a photochemical reaction to form cyclo butane tetra carboxylic dianhydride (CBTA). This compound is used in the production of polyimides and as an alignment film for liquid crystal displays.

일반 설명

Colorless crystalline needles, flakes, pellets, rods, briquettes, lumps or a fused mass. Melts at 113°F. Shipped both as a solid and in the molten state. Vapors, fumes and dusts strong irritate the eyes, skin and mucous membranes. Flash point 218°F. Autoignition temperature 890°F. Used to make paints and plastics and other chemicals.

공기와 물의 반응

Soluble in water. Reacts slowly with water to form maleic acid and heat.

반응 프로필

Maleic anhydride react vigorously on contact with oxidizing materials. Reacts exothermically with water or steam. Undergoes violent exothermic decomposition reactions, producing carbon dioxide, in the presence of strong bases (sodium hydroxide, potassium hydroxide, calcium hydroxide), alkali metals (lithium, sodium, potassium), aliphatic amines (dimethylamine, trimethylamine), aromatic amines (pyridine, quinoline) at temperatures above 150° C [Vogler, C. A. et al., J. Chem. Eng. Data, 1963, 8, p. 620]. A 0.1% solution of pyridine (or other tertiary amine) in Maleic anhydride at 185°C gives an exothermic decomposition with rapid evolution of gas [Chem Eng. News 42(8); 41 1964]. Maleic anhydride is known as an excellent dienophile in the Diels-Alder reaction to produce phthalate ester derivatives. These reactions can be extremely violent, as in the case of 1-methylsilacyclopentadiene [J. Organomet., Chem., 1979, 179, c19]. Maleic anhydride undergoes a potentially explosive exothermic Diels-Alder reaction with 1-methylsilacyclopenta-2,4-diene at 150C [Barton, T. J., J. Organomet. Chem., 1979, 179, C19], and is considered an excellent dieneophile for Diels-alder reactions [Felthouse, Timothy R. et al. "Maleic anhydride , Maleic Acid, and Fumaric Acid." Kirk-Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. 2005].

위험도

Irritant to tissue. Dermal and respiratory sensitization. Questionable carcinogen.

건강위험

Inhalation causes coughing, sneezing, throat irritation. Skin contact causes irritation and redness. Vapors cause severe eye irritation; photophobia and double vision may occur.

화재위험

Behavior in Fire: When heated above 300°F in the presence of various materials may generate heat and carbon dioxide. Will explode if confined.

Safety Profile

Poison by ingestion and intraperitoneal routes. Moderately toxic by skin contact. A corrosive irritant to eyes, skin, and mucous membranes. Can cause pulmonary edema. Questionable carcinogen with experimental tumorigenic data. Mutation data reported. A pesticide. Combustible when exposed to heat or flame; can react vigorously on contact with oxidizing materials. Explosive in the form of vapor when exposed to heat or flame. Reacts with water or steam to produce heat. Violent reaction with bases (e.g., sodmm hydroxide, potassium hydroxide, calcium hydroxide), dkah metals (e.g., sodium, potassium), amines (e.g., dimethylamine, triethylamine), lithium, pyridine. To fight fire, use alcohol foam. Incompatible with cations. When heated to decomposition (above 150℃) it emits acrid smoke and irritating fumes. See also ANHYDRIDES.

잠재적 노출

Maleic anhydride is used in unsaturated polyester resins; Agricultural chemical, and lubricating additives; in the manufacture of unsaturated polyester resins; in the manufacture of fumaric acid; in alkyd resin manufacture; in the manufacture of pesticides e.g., malathion, maleic hydrazide, and captan).

운송 방법

UN2215 Maleic anhydride, Hazard class: 8; Labels: 8-Corrosive material.
Maleic Anhydride is commercialized and transported in the solid and molten forms. The molten Maleic Anhydride is transported at temperatures ranging from 60 to 80°C in well-insulated tank containers or road tankers provided with heating devices. In the solid form, it can be transported as pastilles, which are usually packed in polyethylene bags of 25 kg and transported either by rail tanker or by truck.

Purification Methods

Crystallise it from *benzene, CHCl3, CH2Cl2 or CCl4. Sublime it under reduced pressure. [Skell et al. J Am Chem Soc 108 6300 1986, Beilstein 17 III/IV 5897, 17/11 V 55.]

비 호환성

Reacts slowly with water (hydrolyzes) to form maleic acid, a medium-strong acid. Dust may form explosive mixture with air. Reacts with strong oxidizers, oil, water, alkali metals; strong acids; strong bases. Violent reaction with alkali metals and amines above 66C. Dangerous reaction with oxidizers, amines, alkali metals, and hydroxides. Compounds of the carboxyl group react with all bases, both inorganic and organic (i.e., amines) releasing substantial heat, water and a salt that may be harmful. Incompatible with arsenic compounds (releases hydrogen cyanide gas), diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides (releasing heat, toxic, and possibly flammable gases), thiosulfates and dithionites (releasing hydrogen sulfate and oxides of sulfur)

폐기물 처리

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform to EPA regulations governing storage, transportation, treatment, and waste disposal. Controlled incineration: care must be taken that complete oxidation to nontoxic products occurs.

말레산 무수물 준비 용품 및 원자재

원자재

준비 용품


말레산 무수물 공급 업체

글로벌( 892)공급 업체
공급자 전화 이메일 국가 제품 수 이점
Wuhan Biet Co., Ltd.
+8617320528784
min@biet.com.cn China 41 58
Auschemicals Pty Ltd
+61406202619
info@auschemicals.com Australia 431 58
Chongqing Chuandong Chemical (Group) Co. Ltd.
+86-13637972665 +86-13637972665
wxc@cd1958.com China 81 58
Henan Fengda Chemical Co., Ltd
+86-371-86557731 +86-13613820652
info@fdachem.com China 7613 58
Handan Huajun chemicals Co.,Ltd
+86-0310-8166573 +8618630058311
sales@huajunchem.com China 28 58
Shanghai UCHEM Inc.
+862156762820 +86-13564624040
sales@myuchem.com China 6710 58
Frapp's ChemicalNFTZ Co., Ltd.
+86 (576) 8169-6106
sales@frappschem.com China 885 50
Capot Chemical Co.,Ltd.
571-85586718 +8613336195806
sales@capotchem.com China 29797 60
Henan Tianfu Chemical Co.,Ltd.
+86-0371-55170693 +86-19937530512
info@tianfuchem.com China 21695 55
Shanghai Time Chemicals CO., Ltd.
+86-021-57951555 +8617317452075
jack.li@time-chemicals.com China 1807 55

말레산 무수물 관련 검색:

Copyright 2019 © ChemicalBook. All rights reserved