페놀 수지

페놀 수지 속성

페놀 수지 C화학적 특성, 용도, 생산

화학적 성질

The phenolic resins most widely used are low molecular weight butylated resols, which contain phenolic hydroxyl groups and etherified and unetherified methylol groups. The epoxy resins used have a molecular weight of 3000-4000 and therefore contain secondary hydroxyl groups.

용도

Phenol-formaldehyde resin is used in binders, adhesives, laminates, impregnation products, surface coatings, casting sand, etc.

제조 방법

Phenol-formaldehyde resin is prepared as follows:
C6H5OH+H2C=O ---> [-C6H2(OH)CH2-]n
One-Stage Resins. The ratio of formaldehyde to phenol is high enough to allow the thermosetting process to take place without the addition of other sources of cross-links.
Two-Stage Resins. The ratio of formaldehyde to phenol is low enough to prevent the thermosetting reaction from occurring during manufacture of the resin. At this point the resin is termed novolac resin. Subsequently, hexamethylenetetramine is incorporated into the material to act as a source of chemical cross-links during the molding operation (and conversion to the thermoset or cured state).

공업 용도

Phenol-formaldehyde resin is a synthetic resin, commonly known as phenolic, made by the reaction of phenol and formaldehyde, and employed as a molding material for the making of mechanical and electrical parts. The resins are also used for laminating, coatings, and casting resins.
Phenolic resins are used most extensively as thermosetting plastic materials, as there are only a few uses as thermoplastics. The polymer is composed of carbon, hydrogen, oxygen, and sometimes nitrogen. Its molecular weight varies from a very low value during its early state of formation to almost infinity in its final state of cure. The chemical configuration, in the thermoset state, is usually represented by a threedimensional network in which the phenolic nuclei are linked by methylene groups. The completely cross-linked network requires three methylene groups to two phenolic groups. A lesser degree of cross-linking is attainable either by varying the proportions of the ingredients or by blocking some of the reactive positions of the phenolic nucleus by other groups, such as methyl, butyl, etc. Reactivity can be enhanced by increasing the hydroxyl groups on the phenolic nuclei, for example, by the use of resorcinol.
The outstanding characteristics of phenolics are good electrical properties, very rigid set, good tensile strength, excellent heat resistance, good rigidity at elevated temperature, good aging properties; also, good resistance to water, organic solvents, weak bases, and weak acids. All these characteristics are coupled with relatively low cost.

페놀 수지 준비 용품 및 원자재

원자재

준비 용품

페놀 수지 공급 업체

공급자	전화	이메일	국가	제품 수	이점
Hebei Mojin Biotechnology Co., Ltd	+8613288715578	sales@hbmojin.com	China	12453	58
Henan Tianfu Chemical Co.,Ltd.	+86-0371-55170693 +86-19937530512	info@tianfuchem.com	China	21695	55
Hefei TNJ Chemical Industry Co.,Ltd.	+86-0551-65418679 +86-18949832763	info@tnjchem.com	China	2989	55
Chemson Industrial (Shanghai) Co., Ltd.	86-21-65208861- 8007	sales1@chemson.com.cn	CHINA	117	58
Hubei Jusheng Technology Co.,Ltd.	18871490254	linda@hubeijusheng.com	CHINA	28180	58
Hubei xin bonus chemical co. LTD	86-13657291602	linda@hubeijusheng.com	CHINA	22968	58
Chongqing Chemdad Co., Ltd	+86-023-61398051 +8613650506873	sales@chemdad.com	China	39916	58
Shaanxi Dideu Medichem Co. Ltd	+86-029-81138252 +86-18789408387	1057@dideu.com	China	3783	58
Antai Fine Chemical Technology Co.,Limited	18503026267	info@antaichem.com	CHINA	9641	58
Hefei TNJ Chemical Industry Co.,Ltd.	0551-65418671	sales@tnjchem.com	China	34572	58

페놀 수지 관련 검색: