Acetone oxime manufacturers and suppliers

Acetone oxime suppliers

Properties

Melting point:: 60-63 °C(lit.)

Boiling point:: 135 °C(lit.)

Density: 0.901 g/mL at 25 °C(lit.)

vapor pressure: 1.64-2.42hPa at 25℃

refractive index: 1.4156

Flash point:: 60 °C

storage temp.: Sealed in dry,Room Temperature

solubility: Chloroform (Sparingly), Methanol (Slightly)

form: Crystals or Crystalline Solid

pka: 12.2(at 25℃)

color: White to yellow

Specific Gravity: 0.901

Water Solubility: 330 g/L (20 ºC)

Merck: 14,75

BRN: 1560146

Dielectric constant: 3.0（-4℃）

InChIKey: PXAJQJMDEXJWFB-UHFFFAOYSA-N

LogP: 0.077-0.2 at 22.7℃

Safety Information

Symbol(GHS): GHS02,GHS05,GHS07,GHS08

Signal word: Danger

Hazard statements: H228-H312-H317-H318-H351

Precautionary statements: P201-P210-P280-P302+P352+P312-P305+P351+P338+P310-P308+P313

Safety Statements: 22-24/25

RIDADR: UN1325

WGK Germany: 3

RTECS: AL6825000

F: 21

TSCA: Yes

HazardClass: 4.1

PackingGroup: III

HS Code: 29280000

Toxicity: LD orl-rat: >500 mg/kg NCNSA6 5,26,53

Use

Acetone oxime has a strong reduction, it is easy to react with oxygen in water to reduce the dissolved oxygen content in water, reaction is as follows: 2C3H7NO + O2 → 2C3H6CO + N2O + H2O and 4 (CH3) 2C = N-OH + O2 → 4 (CH3) 2C = O + 2N2 + H2O Meanwhile, Acetoxime also reacts with the metal for passivation, reaction is as follows: 2C3H7NO + 6Fe2O3 → 2C3H6CO + N2O + 4Fe3O4 + H2O Acetoxime can reduce the content of iron in the feed water, to prevent overheating of the metal pipe and corrosion damage of the boiler due to the formation of iron oxide deposits, while with the cleaning effect for copper corrosion products deposited on pipes, economizer, etc. This is the reason that in the early use of acetone oxime, the content of copper in boiler water will be significantly higher. Decomposition products of Acetoxime are mainly nitrogen and water, a small amount of formic acid, acetic acid, nitrogen oxides and so on. On the premise of ensuring oxygen removal effect, when the residual amount of DMKO in feed water is controlled to be 5~40μg/L, the formic acid, acetic acid, Cl-, SO42 + was not detected in all tested samples of water vapor, at the same time NO2-and NO3-content of same samples were tested, are also not detected. Therefore, there is no any adverse effects for the use of acetone oxime oxygen in vapor system.

You can find Acetone oxime suppliers, manufacturers, and distributors from countries such as China, United States and the United Kingdom here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.