Dichloromethane manufacturers and suppliers

Dichloromethane suppliers

Properties

Melting point:: -97 °C

Boiling point:: 39.8-40 °C mm Hg(lit.)

Density: 1.325 g/mL at 25 °C(lit.)

vapor density: 2.9 (vs air)

vapor pressure: 24.45 psi ( 55 °C)

refractive index: n20/D 1.424(lit.)

Flash point:: 39-40°C

storage temp.: room temp

solubility: Miscible in ethyl acetate, alcohol, hexanes, methanol, diethyl ether, n-octanol, acetone benzene, carbon tetrachloride, diethyl ether and chloroform.

form: Liquid

color: APHA: ≤10

Specific Gravity: 1.329 (20/20℃)

Odor: Odor threshold 160 to 230 ppm

Odor Threshold: 160ppm

explosive limit: 13-22%(V)

Water Solubility: 20 g/L (20 ºC)

λmax: λ: 235 nm Amax: 1.00
λ: 240 nm Amax: 0.20
λ: 250 nm Amax: 0.05
λ: 260 nm Amax: 0.02
λ: 340-400 nm Amax: 0.01

Merck: 14,6063

BRN: 1730800

Henry's Law Constant: 2.49 at 30 °C (headspace-GC, Sanz et al., 1997)

Exposure limits: TLV-TWA 50 ppm (～175 mg/m³) (ACGIH); carcinogenicity: Suspected Human Carcinogen (ACGIH), Animal Sufficient Evidence, Human Inadequate Evidence (IARC).

Dielectric constant: 9.1（20℃）

Stability:: Volatile

LogP: 1.250

Safety Information

Symbol(GHS): GHS07,GHS08

Signal word: Warning

Hazard statements: H315-H319-H336-H351

Precautionary statements: P201-P202-P261-P302+P352-P305+P351+P338-P308+P313

Hazard Codes: Xn,T,F,N,C

Risk Statements: 40-39/23/24/25-23/24/25-11-67-36/37/38-68/20/21/22-20/21/22-50-37-34

Safety Statements: 23-24/25-36/37-45-16-7-26-61-36/37/39

RIDADR: UN 1593 6.1/PG 3

WGK Germany: 2

RTECS: PA8050000

F: 3-10

Autoignition Temperature: 556 °C

Hazard Note: Harmful

TSCA: Yes

HS Code: 2903 12 00

HazardClass: 6.1

PackingGroup: III

Toxicity: LD50 orally in young adult rats: 1.6 ml/kg (Kimura)

IDLA: 2,300 ppm

Use

Methylene chloride is used principally as a solvent in paint removers. It is also used as an aerosol propellant, processing solvent in the manufacture of steroids, antibiotics, vitamins, and tablet coatings; as a degreasing agent; in electronics manufacturing; and as a urethane foamblowing agent.Methylene chloride is also used in metal cleaning, as a solvent in the production of polycarbonate resins and triacetate fibers, in film processing, ininkformulations, and as anextraction solvent for spice oleoresins, caffeine, and hops. It was once registered for use in the United States as an insecticide for commodity fumigation of strawberries, citrus fruits, and a variety of grains.

You can find Dichloromethane suppliers, manufacturers, and distributors from countries such as CHINA, India and the United States here. Browse to the tetrahydrofuran product information displayed by the supplier, as well as the supplier's contact and capability information.