4-(3-氟苯基)-2,2-二甲基-5-(4-(甲硫基)苯基)呋喃-3(2H)-酮 基本信息
| 中文名称 | 4-(3-氟苯基)-2,2-二甲基-5-(4-(甲硫基)苯基)呋喃-3(2H)-酮 |
|---|---|
| 中文同义词 | 4-(3-氟苯基)-2,2-二甲基-5-(4-(甲硫基)苯基)呋喃-3(2H)-酮;4-(3-氟苯基)-2,2-二甲基-5-[4-(甲硫基)苯基]-3(2H)-呋喃酮;帕马考昔杂质;帕马考昔杂质1 |
| 英文名称 | 4-(3-fluorophenyl)-2,2-dimethyl-5-(4-(methylthio)phenyl)furan-3(2H)-one |
| 英文同义词 | 4-(3-fluorophenyl)-2,2-dimethyl-5-(4-(methylthio)phenyl)furan-3(2H)-one;4-(3-fluorophenyl)-2,2-diMethyl-5-[4-(Methylsulfanyl)phenyl]-2,3-dihydrofuran-3-one;4-(3-Fluorophenyl)-2,2-dimethyl-5-[4-(methylthio)phenyl]-3(2H)-furanone;4-(3-fluorophenyl)-2,2-dimethyl-5-(4-(methylthio)phenyl)furan-3(2H)-on;Polmacoxib Impurity;3(2H)-Furanone, 4-(3-fluorophenyl)-2,2-dimethyl-5-[4-(methylthio)phenyl]-;Polmacoxib Impurity 1;4-(3-fluorophenyl)-2,2-dimethyl-5- (4-(methylthio)phenyl)furan-3(2H)-one (FFM) |
| CAS号 | 301693-50-5 |
| 分子式 | C19H17FO2S |
| 分子量 | 328.4 |
| EINECS号 | |
| 相关类别 | |
| Mol文件 | 301693-50-5.mol |
| 结构式 | ![]() |
4-(3-氟苯基)-2,2-二甲基-5-(4-(甲硫基)苯基)呋喃-3(2H)-酮 性质
| 沸点 | 448.2±45.0 °C(Predicted) |
|---|---|
| 密度 | 1.25±0.1 g/cm3(Predicted) |
| 储存条件 | 2-8°C |
| InChI | InChI=1S/C19H17FO2S/c1-19(2)18(21)16(13-5-4-6-14(20)11-13)17(22-19)12-7-9-15(23-3)10-8-12/h4-11H,1-3H3 |
| InChIKey | OTXGJFNQTZTDPD-UHFFFAOYSA-N |
| SMILES | O1C(C2=CC=C(SC)C=C2)=C(C2=CC=CC(F)=C2)C(=O)C1(C)C |
20769-85-1
301699-27-4
301693-50-5
以2-溴代异丁酰溴和2-(3-氟苯基)-1-(4-(甲硫基)苯基)乙酮为原料合成4-(3-氟苯基)-2,2-二甲基-5-(4-(甲硫基)苯基)呋喃-3(2H)-酮的一般步骤如下:将2.60g(10mmol)2-(3-氟苯基)-1-(4-(甲硫基)苯基)乙酮与20.8mL N,N-二甲基乙酰胺的混合物搅拌并冷却至0℃。在0至5℃下,缓慢加入2.0g(50mmol)60%氢化钠,保持此温度搅拌1.0小时。将1.38g(20mmol)1,2,4-三唑溶于13.8mL N,N-二甲基乙酰胺中,然后滴加2.29g(10mmol)2-溴代异丁酰溴,混合物在约30℃下搅拌2小时。反应完成后,过滤除去不溶物。将滤液缓慢滴入反应烧瓶中,耗时约1.0小时。混合物在室温下搅拌过夜。随后,加入60mL 2N盐酸,将混合物浓缩至接近干燥。向残余物中加入60mL水,过滤,滤饼用水洗涤两次,最后用乙醇重结晶,得到2.85g目标产物,收率为86.8%。
参考文献:
[1] Patent: CN106866558, 2017, A. Location in patent: Paragraph 0102; 0103; 0104
[2] Bioorganic and Medicinal Chemistry, 2002, vol. 10, # 4, p. 1137 - 1142
