- Strontium sulfide
-
- $8.00 / 1KG
-
2024-03-29
- CAS:1314-96-1
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: g-kg-tons, free sample is available
- STRONTIUM SULFIDE
-
- $0.00 / 25KG
-
2023-09-12
- CAS:1314-96-1
- Min. Order: 1KG
- Purity: 99%
- Supply Ability: 50000KG/month
- STRONTIUM SULFIDE
-
- $15.00 / 1KG
-
2021-08-12
- CAS:1314-96-1
- Min. Order: 1KG
- Purity: 99%+ HPLC
- Supply Ability: Monthly supply of 1 ton
|
| | Strontium sulfide Basic information |
| | Strontium sulfide Chemical Properties |
| Melting point | >2000 °C(lit.) | | density | 3,7 g/cm3 | | solubility | slightly soluble in H2O; soluble in acid solutions | | form | Powder | | Specific Gravity | 3.7 | | color | Gray | | Water Solubility | Slightly soluble in water. Decomposes in acids | | Sensitive | Hygroscopic | | Merck | 14,8849 | | Stability: | Stable. Incompatible with acids. | | CAS DataBase Reference | 1314-96-1(CAS DataBase Reference) | | EPA Substance Registry System | Strontium sulfide (1314-96-1) |
| Hazard Codes | C | | Risk Statements | 31-34 | | Safety Statements | 26-36/37/39-45 | | RIDADR | UN 3262 8/PG 3 | | WGK Germany | 3 | | TSCA | Yes | | HazardClass | 4.3 | | PackingGroup | III | | HS Code | 2830908500 |
| | Strontium sulfide Usage And Synthesis |
| Chemical Properties | Strontium sulfide is a grey powder giving a hydrogen sulphide-like smell in the air. It is insoluble in cold water, and decomposes in hot water and acid. In the wet air can decompose to H2S, can also be oxidised to SrSO4. heating for 3 hours to light red, and water vapour contact with the formation of SrO, SrSO4, H2 and SO2. reaction with acid to produce H2S. | | Uses | Strontium sulfide (SrS) smells like rotten eggs. It is used as a depilatory to remove hair from skin and hides or In luminous paints. | | Preparation | Strontium sulfide can be
prepared by the direct reaction of the elements, calcined
in an inert atmosphere, at a 1:1.05 molecular ratio:
Sr＋S＋heat→SrS
SrS can also be produced by the “carbothermic reduction”
of calcium sulfate, which entails the conversion of
carbon, usually as charcoal, to CO2:
SrSO4＋2C→SrS＋ 2CO2
This can react further:
3SrSO4＋SrS→4SrO＋ 4SO2
A mixture of oxide-sulfide is the result. Thus, this
type of preparation cannot be used to prepare a pure
SrS salt. | | Production Methods | Strontium sulfide, grayish-white solid (thermodynamic Ksp 500) reactive with water to form strontium hydrosulfide, Sr(SH)2, solution. Strontium hydrosulfide is formed (1) by reaction of strontium sulfide and H2O, (2) by saturation of strontium hydroxide solution with H2S. Strontium polysulfides are formed by boiling strontium hydrosulfide with sulfur. | | General Description | Gray powder with an odor of H2S in moist air. | | Air & Water Reactions | Slowly releases H2S in moist air. | | Reactivity Profile | STRONTIUM SULFIDE reacts vigorously with acids to release hydrogen sulfide gas. May react exothermically with oxidizing agents including inorganic oxoacids, organic peroxides and epoxides, and inorganic peroxides to generate toxic gases. | | Hazard | Moderate fire and explosion risk. Irritant to
skin and tissues. | | Health Hazard | ACUTE/CHRONIC HAZARDS: Irritant to skin and tissue. Moderate fire hazard and explosion risk. | | Flammability and Explosibility | Non flammable | | Safety Profile | Poison by inhalation and ingestion. Ready decomposes to yield H2S. Incompatible with lead(1V) oxide. When heated to decomposition it emits toxic fumes of SOx. See also SULFIDES and STRONTIUM COMPOUNDS. |
| | Strontium sulfide Preparation Products And Raw materials |
|