- 2-Chloroethyl vinyl ether
-
- $15.00 / 1KG
-
2021-07-02
- CAS:110-75-8
- Min. Order: 1KG
- Purity: 99%+ HPLC
- Supply Ability: Monthly supply of 1 ton
|
| | 2-Chloroethyl vinyl ether Basic information |
| | 2-Chloroethyl vinyl ether Chemical Properties |
| Melting point | -70 °C | | Boiling point | 109 °C (lit.) | | density | 1.048 g/mL at 25 °C (lit.) | | vapor pressure | 760 mm Hg ( 109 °C) | | refractive index | n20/D 1.438(lit.) | | Fp | 61 °F | | storage temp. | 2-8°C | | solubility | Soluble in ethanol and ether (Weast, 1986) | | form | Liquid | | color | Clear colorless to light yellow | | Water Solubility | Slightly soluble in water | | Merck | 14,2139 | | BRN | 773787 | | Henry's Law Constant | 2.5 (x 10-4 atm?m3/mol)(Pankow and Rosen, 1988) | | Exposure limits | No exposure limit is set for this compound. | | CAS DataBase Reference | 110-75-8(CAS DataBase Reference) | | NIST Chemistry Reference | Ethene, (2-chloroethoxy)-(110-75-8) | | EPA Substance Registry System | 2-Chloroethyl vinyl ether (110-75-8) |
| | 2-Chloroethyl vinyl ether Usage And Synthesis |
| Description | 2-Chloroethyl vinyl ether is a highly flammable, colorless liquid. Molecular weight =106.55; Boilingpoint =108.7℃; Freezing/Melting point =70℃; Flashpoint =27℃. Hazard Identification (based on NFPA 704 MRating System): Health 2, Flammability 3, Reactivity 2.Slightly soluble in water | | Chemical Properties | 2-Chloroethyl vinyl ether is a highly
flammable, colorless liquid. | | Chemical Properties | CLEAR COLORLESS TO LIGHT YELLOW LIQUID | | Uses | Manufacture of cellulose ethers. | | Uses | 2-Chloroethyl vinyl ether is used to producesedatives, anesthetics, and cellulose ethers. | | General Description | Liquid boiling at 209°C. Density 1.048 g / cm3 and insoluble in water. Hence sinks in water. Flash point 142°F. Toxic. | | Air & Water Reactions | Flammable. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick, 1979 p.151-154, 164]. Insoluble in water. | | Reactivity Profile | 2-Chloroethyl vinyl ether forms salts with strong acids and addition complexes with Lewis acids. May react violently with strong oxidizing agents. Typically stabilized against polyermizable by addition of triethanolamine. | | Hazard | Moderate fire risk. Combustible. | | Health Hazard | 2-Chloroethyl vinyl ether is moderately toxicto humans by inhalation and ingestion. Expo sure to its vapors can produce irritation of theeyes, nose, and lungs. Rats exposed to itsvapors at 250 ppm concentration in air died4 hours after exposure. Pure liquid is an irri tant to the skin. The liquid may be absorbedthrough the skin. The dermal toxicity, how ever, is very low
LD50 value, oral (rats): 250 mg/kg
The carcinogenicity of this compoundis not documented. However, drawing a similarity with other low aliphatic haloethers,this compound at high dosage may exhibitcarcinogenicity to animals. | | Health Hazard | ACUTE/CHRONIC HAZARDS: Dangerous when exposed to heat, flame, or oxidizers. Moderately toxic by ingestion and inhalation. DO NOT INDUCE VOMITING. Volatile chemicals have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. | | Fire Hazard | Highly flammable. | | Safety Profile | Poison by ingestion.
Moderately toxic by inhalation and skin
contact. A severe eye and skin irritant. See
also ETHERS. Dangerous fire hazard when
exposed to heat, flame, or oxidizers.
Potentially explosive. May form dangerous
peroxides on exposure to air. To fight fire,
use alcohol foam, dry chemical. When
heated to decomposition it emits toxic
fumes of Cl-. See also CHLORIDES and
ETHERS. | | Potential Exposure | 2-Chloroethyl vinyl ether is used in the
manufacture of anesthetics, sedatives, and cellulose ethers.
The number of potentially exposed individuals is greatest for
the following areas: fabricated metal products; wholesale
trade; leather, rubber and plastic; and chemical products. | | First aid | If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medincluding resuscitation mask) if breathing has stopped andCPR if heart action has stopped. Transfer promptly to amedical facility. When this chemical has been swallowed,get medical attention. Give large quantities of water andinduce vomiting. Do not make an unconscious personvomit.ical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions,If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, | | Environmental fate | Biological. When 2-chloroethyl vinyl ether was statically incubated in the dark at 25 °C with
yeast extract and settled domestic wastewater inoculum, significant biodegradation with rapid
adaptation was observed. At concentrations of 5 and 10 mg/L, complete degradation was observed
after 21 d (Tabak et al., 1981).
Chemical/Physical. Chlorination of 2-chloroethyl vinyl ether to α-chloroethyl ethyl ether or
β-chloroethyl ethyl ether may occur in water treatment facilities. The alpha compound is very
unstable in water and decomposes almost as fast as it is formed (Summers, 1955). Although stable
in NaOH solutions, in dilute acid solutions hydrolysis yields acetaldehyde and chlorohydrin
(Windholz et al., 1983). At pH 7 and 25 °C, the hydrolysis half-life is 175 d (Jones and Wood,
1964).
At influent concentrations of 10.0, 1.0, 0.1, and 0.01 mg/L, the GAC adsorption capacities at pH
5.4 were 25, 3.9, 0.6, and 0.1 mg/g, respectively (Dobbs and Cohen, 1980). | | storage | Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with this chemical you should be trainedon its proper handling and storage. Before entering confinedspace where 2-chloroethyl vinyl ether may be present,check to make sure that an explosive concentration does notexist. Store in tightly closed containers in a cool, well-ventilated area. Metal containers involving the transfer of thischemical should be grounded and bonded. Where possible,automatically pump liquid from drums or other storage containers to process containers. Drums must be equipped withself-closing valves, pressure vacuum bungs, and flamearresters. Use only nonsparking tools and equipment, especially when opening and closing containers of this chemical. Sources of ignition, such as smoking and open flames,are prohibited where this chemical is used, handled, orstored in a manner that could create a potential fire orexplosion hazard. | | Shipping | UN1992 Flammable liquids, toxic, n.o.s., Hazard
Class: 3; Labels: 3-Flammable liquid, 6.1-Poisonous materials, Technical Name Required. | | Purification Methods | Wash the ether repeatedly with equal volumes of water made slightly alkaline with KOH, dry with sodium, and distil it under vacuum. Stabilise it with ~0.01% of triethanolamine. [Beilstein 1 IV 2051.] TOXIC. | | Incompatibilities | Peroxidizable Compound; may form
unstable peroxides that can cause explosive polymerization.
Stabilizer: 300 ppm triethanolamine and 50 ppm MEHQ
(monomethyl ether of hydroquinone). 2-Chloroethyl vinyl
ether forms explosive mixture with air. May accumulate
static electrical charges, and may cause ignition of its
vapors. Contact with oxidizing materials may cause fire or
explosion hazard. Stabilizer: 300 ppm triethanolamine &
50 ppm MEHQ (monomethyl ether of hydroquinone). | | Waste Disposal | Residues may be packaged in
epoxy-lined drums and disposed of by high temperature
incineration with HCl scrubbing of effluent gases. |
| | 2-Chloroethyl vinyl ether Preparation Products And Raw materials |
|