|
|
| | 3-Mercaptopropyltriethoxysilane Basic information | | Introduction |
| | 3-Mercaptopropyltriethoxysilane Chemical Properties |
| Boiling point | 210 °C | | density | 0.987 g/mL at 20 °C (lit.) | | vapor pressure | 0-7910Pa at 25℃ | | refractive index | 1.4331 | | Fp | 88°C | | storage temp. | 2-8°C | | form | clear liquid | | pka | 10.39±0.10(Predicted) | | color | Colorless to Almost colorless | | Specific Gravity | 0.932 | | Water Solubility | Hydrolyzes slowly in water. | | Hydrolytic Sensitivity | 7: reacts slowly with moisture/water | | Sensitive | Moisture Sensitive | | BRN | 2039575 | | LogP | -1.4-2.7 at 20℃ | | CAS DataBase Reference | 14814-09-6(CAS DataBase Reference) | | EPA Substance Registry System | 1-Propanethiol, 3-(triethoxysilyl)- (14814-09-6) |
| Hazard Codes | Xi | | Risk Statements | 36/37/38 | | Safety Statements | 26-36 | | RIDADR | UN 3334 | | WGK Germany | 3 | | RTECS | TZ7760000 | | F | 10-13 | | TSCA | Yes | | PackingGroup | III | | HS Code | 29309090 |
| | 3-Mercaptopropyltriethoxysilane Usage And Synthesis |
| Introduction | 3-Mercaptopropyltriethoxysilane is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. 3-Mercaptopropyltriethoxysilane is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.
Applications:
- 3-Mercaptopropyltriethoxysilane can be used as coupling agent to improve the adhesion of sulfur cured elastomers (polysulfide, polyurethane sealants) to inorganic fillers (such as silica, clay, glass, mica and talc etc.), fiberglass and surfaces. Mineral-reinforced articles such as shoe soles, rubber rollers and wheels, white sidewalls, and wire and cable insulation also can be produced with lower silane loadings.
- Used to improve properties of mineral filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time.
- Used as a pretreatment on minerals or added at the time of compounding.
- Used to improve low-rolling resistance in silica-reinforced tire tread compounds.
| | Chemical Properties | Clear to straw liquid with unpleasant odor of sulfide. | | Uses | It can improve the properties of the mineral-filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience. It can be used as a pretreatment on minerals or added at the time of compounding. Mineral-reinforced rubbers such as shoe soles, rollers, wheels, white sidewalls, wire and cable insulation are the common case (3-Mercaptopropyl)triethoxysilane, could be used in. It also finds it uses as an intermediate, in polymer and tire manufacture, and as a laboratory reagent. | | Flammability and Explosibility | Not classified |
| | 3-Mercaptopropyltriethoxysilane Preparation Products And Raw materials |
|