2,6-DICHLOROTOLUENE
Product identifier
- Product name: 2,6-DICHLOROTOLUENE
- CBnumber: CB9168011
- CAS: 29797-40-8
- EINECS Number: 249-854-8
- Synonyms: 1,3-dichloro-2-methylbenzene,DICHLOROTOLUENE MIXTURE
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
- Uses advised against: none
Company Identification
- Company: Chemicalbook
- Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
- Telephone: 400-158-6606
Classification of the substance or mixture
Skin irritation, Category 2
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 1
Label elements
Pictogram(s)
-
Signal word
Warning
H315 Causes skin irritation
H410 Very toxic to aquatic life with long lasting effects
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P273 Avoid release to the environment.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P391 Collect spillage.
none
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards
no data available
Substance
- Product name: 2,6-DICHLOROTOLUENE
- Synonyms: 1,3-dichloro-2-methylbenzene,DICHLOROTOLUENE MIXTURE
- CAS: 29797-40-8
- EC number: 249-854-8
- MF: C7H6Cl2
- MW: 161.03
Description of first aid measures
If inhaledFresh air, rest. Half-upright position. Refer for medical attention.
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Do NOT induce vomiting. Refer for medical attention .
Most important symptoms and effects, both acute and delayed
Acute: vapors are highly irritating to eyes. May be fatal if inhaled, swallowed, or absorbed through skin. (EPA, 1998)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)
Indication of any immediate medical attention and special treatment needed
no data available
Extinguishing media
Keep unnecessary people away and isolate hazard area. Stay upwind and keep out of low areas. Wear positive pressure breathing apparatus and special protective clothing. For small fires: dry chemical, carbon dioxide, water spray, or foam. For large fires: water spray, fog, or foam. Move container from fire area if possible. Fight fire from maximum distance. Dike fire control water for later disposal; do not scatter the material. (EPA, 1998)
Specific Hazards Arising from the Chemical
Fire may produce irritating or poisonous gases. Runoff from fire control water may give off poisonous gases and may cause pollution. Cylinder may explode in the heat of fire. Reacts with water to release hydrochloric acid. (EPA, 1998)
Excerpt from ERG Guide 153 [Substances - Toxic and/or Corrosive (Combustible)]: Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. (ERG, 2016)
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Environmental precautions
Personal protection: complete protective clothing including self-contained breathing apparatus. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Methods and materials for containment and cleaning up
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
Precautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from food and feedstuffs. See Chemical Dangers. Ventilation along the floor.
Control parameters
Occupational Exposure limit values| Component | Dichloromethylbenzene | |||
|---|---|---|---|---|
| CAS No. | 29797-40-8 | |||
| Limit value - Eight hours | Limit value - Short term | |||
| ppm | mg/m3 | ppm | mg/m3 | |
| Austria | 5 | 30 | 20 | 120 |
| France | ? | 0,2 | ? | ? |
| Germany (AGS) | 1,3 | 8 | 2,6 (1) | 16 (1) |
| Remarks | ||||
| Germany (AGS) | (1) 15 minutes average value | |||
no data available
Exposure controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures
Eye/face protectionWear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
Information on basic physicochemical properties
- Physical state
Benzylidene chloride is a colorless oily liquid with a faint aromatic odor. Insoluble in water and denser than water. Strongly irritates skin and eyes. Used to manufacture dyes.
- Colour
COLORLESS OILY LIQUID
- Odour
PUNGENT ODOR
- Melting point/freezing point
-16.4°C
- Boiling point or initial boiling point and boiling range
202°C at 760mmHg
- Flammability
Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
- Lower and upper explosion limit/flammability limit
no data available
- Flash point
80.9°C
- Auto-ignition temperature
525°C
- Decomposition temperature
no data available
- pH
no data available
- Kinematic viscosity
no data available
- Solubility
less than 1 mg/mL at 63° F (NTP, 1992)
- Partition coefficient n-octanol/water
log Kow= 3.217 (calculated)
- Vapour pressure
0.233mmHg at 25°C
- Density and/or relative density
0.993g/cm3
- Relative vapour density
5.6 (technical grade) (NTP, 1992) (Relative to Air)
- Particle characteristics
no data available
Reactivity
Decomposes on burning. Decomposes on contact with acids or water. This produces toxic fumes including hydrogen chloride (see ICSC 0163). Reacts with strong oxidants.
Chemical stability
no data available
Possibility of hazardous reactions
Combustible.BENZYLIDENE CHLORIDE is incompatible with strong oxidizers and strong bases. It readily hydrolyzes under acid or alkaline conditions. It reacts with metals (except nickel and lead). (NTP, 1992).
Conditions to avoid
no data available
Incompatible materials
Reacts with water to release hydrochloric acid.
Hazardous decomposition products
when heated to decomp ... emits toxic fumes of /hydrogen chloride/.
Acute toxicity
- Oral: LD50 Rat oral 3,250 mg/kg.
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
Evaluation: There is limited evidence in humans for the carcinogenicity of alpha-chlorinated toluenes and benzoyl chloride. ... There is limited evidence in experimental animals for the carcinogenicity of benzal chloride. ... Overall evaluation: Combined exposures to alpha-chlorinated toluenes and benzoyl chloride are probably carcinogenic to humans (Group 2A). alpha-Chlorinated toluenes & benzoyl chloride
Reproductive toxicity
no data available
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
Benzal chloride was found to readily biodegrade in water(1).
Bioaccumulative potential
Based on a computer-calculated log Kow value of 3.217(1), the BCF value for benzal chloride can be estimated to be 164(2,SRC). Due to the relatively rapid hydrolysis of benzal chloride in water, bioconcentration in aquatic organisms is not likely to occur(SRC).
Mobility in soil
Based on molecular topology and quantitative structure-activity relationship analysis, the Koc value for benzal chloride can be estimated to be about 510(1,SRC) which is indicative of medium to low soil mobility(SRC). Due to the relatively rapid hydrolysis in water, leaching of benzal chloride in moist soils is not expected to be significant since it is expected to hydrolyze first(SRC).
Other adverse effects
no data available
Disposal methods
ProductThe material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
UN Number
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Transport hazard class(es)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Packing group, if applicable
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Environmental hazards
ADR/RID: Yes
IMDG: Yes
IATA: Yes
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
Safety, health and environmental regulations specific for the product in question
European Inventory of Existing Commercial Chemical Substances (EINECS)Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.