Ingredients with workplace control parameters
We are not aware of any national exposure limit.
Engineering measures
No data available
Personal protective equipment
Respiratory protection
Not required; except in case of aerosol formation.
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Safety glasses
Hand protection
Material
Nitrile rubber
Break through time
480 min
Glove thickness
0.11 mm
Protective index
Full contact
Manufacturer
(KCL 740 / Aldrich Z677272, Size M)
Material
Nitrile rubber
Break through time
480 min
Glove thickness
0.11 mm
Protective index
Splash contact
Manufacturer
(KCL 740 / Aldrich Z677272, Size M)
Manufacturer
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374
Remarks
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Hygiene measures
Change contaminated clothing. Wash hands after working with substance.