| Identification | More | [Name]
3-(2-Aminoethylamino)propyl-dimethoxymethylsilane | [CAS]
3069-29-2 | [Synonyms]
3-(2-AMINOETHYL) 3-AMINOPROPYLTRIMETHOXYSILANE
3-(2-AMINOETHYLAMINO)PROPYLDIMETHOXYMETHYLSILANE
3-(2-AMINOETHYLAMINO)PROPYL-METHYLDIMETHOXYSILANE
[3-(2-AMINOETHYL)AMINOPROPYL]TRIMETHOXYSILANE
(AMINOETHYL)-3-AMINOPROPYLTRIMETHOXY-SILANE
DAMO
DOW CORNING Z-6020
N-(2-AMINOETHYL)-3-AMINOPROPYLMETHYLDIMETHOXYSILANE
N-(2-AMINOETHYL)-3-AMINOPROPYLTRIMETHOXYSILANE
N-(2-AMINOETHYL)-3-(TRIMETHOXYSILYL)PROPYLAMINE
N-[3-(DIMETHOXYMETHYLSILYL)PROPYL]ETHYLENEDIAMINE
N-[3-(TRIMETHOXYSILYL)PROPYL]ETHYLENEDIAMINE
N-BETA-(AMINOETHYL)-GAMMA-AMINOPROPYLTRIMETHOXYSILANE
2-Ethanediamine,N-[3-(dimethoxymethylsilyl)propyl]-1
3-[N-(.beta.-Aminoethyl)amino]propylmethyldimethoxysilane
aminoethylaminopropylmethyldimethoxysilane
gamma-aminoethyl-gamma-aminopropyl(methyl)dimethoxylsilane
n-[3-(dimethoxymethylsilyl)propyl]-2-ethanediamine
N-(2-AMINOETHYL)-3-AMINOPROPYLMETHYLDIMETHOXYSILANE(KBM602)
N-AminoethylaminopropylmethylDimethoxysilane=APDMS | [EINECS(EC#)]
217-164-6 | [Molecular Formula]
C8H22N2O2Si | [MDL Number]
MFCD00008173 | [Molecular Weight]
206.36 | [MOL File]
3069-29-2.mol |
| Chemical Properties | Back Directory | [Appearance]
Colorless transparent liquid | [Melting point ]
176-177 °C | [Boiling point ]
146 °C15 mm Hg(lit.)
| [density ]
0.968 g/mL at 20 °C(lit.) | [vapor pressure ]
0-12790Pa at 20-25℃ | [refractive index ]
n20/D 1.450
| [Fp ]
220 °F
| [storage temp. ]
Inert atmosphere,Room Temperature | [solubility ]
Soluble in water | [form ]
Liquid | [pka]
10.01±0.19(Predicted) | [Specific Gravity]
0.975 | [Water Solubility ]
860-1000g/L at 20℃ | [Hydrolytic Sensitivity]
7: reacts slowly with moisture/water | [Sensitive ]
Air & Moisture Sensitive | [BRN ]
2074259 | [InChIKey]
MQWFLKHKWJMCEN-UHFFFAOYSA-N | [CAS DataBase Reference]
3069-29-2(CAS DataBase Reference) | [EPA Substance Registry System]
3069-29-2(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
Xn,C,Xi | [Risk Statements ]
R41:Risk of serious damage to eyes.
R43:May cause sensitization by skin contact.
R34:Causes burns. | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S39:Wear eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection . | [RIDADR ]
UN 3267 8/PG 2
| [WGK Germany ]
3
| [RTECS ]
KV7400000
| [F ]
1-10 | [TSCA ]
Yes | [HazardClass ]
8 | [PackingGroup ]
III | [HS Code ]
29319090 |
| Questions And Answer | Back Directory | [Introduction]
3-(2-Aminoethylamino)propyl-dimethoxymethylsilane is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis.
3-(2-Aminoethylamino)propyl-dimethoxymethylsilane is a diamino-functional silane capable of providing good adhesion and superior elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces - reinforcements, fillers and substrates - and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. Applications:
- 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane can be used as adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants.
- Used as additives for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites while;
- Used to maintain the shelf life of the resin over long periods;
- Used as starting material in the synthesis of amino-functional silicones;
- Used as additives to latex coatings, adhesives and sealants;
- Used as adhesion promoters in one-part silylated urethane adhesives and sealants.
|
|
|