Strontiumsulfid Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R31:Entwickelt bei Berührung mit Säure giftige Gase.
R34:Verursacht Verätzungen.
S-Sätze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
Chemische Eigenschaften
Strontium sulfide is a grey powder giving a hydrogen sulphide-like smell in the air. It is insoluble in cold water, and decomposes in hot water and acid. In the wet air can decompose to H2S, can also be oxidised to SrSO4. heating for 3 hours to light red, and water vapour contact with the formation of SrO, SrSO4, H2 and SO2. reaction with acid to produce H2S.
Verwenden
Strontium sulfide (SrS) smells like rotten eggs. It is used as a depilatory to remove hair from skin and hides or In luminous paints.
synthetische
Strontium sulfide can be
prepared by the direct reaction of the elements, calcined
in an inert atmosphere, at a 1:1.05 molecular ratio:
Sr+S+heat→SrS
SrS can also be produced by the “carbothermic reduction”
of calcium sulfate, which entails the conversion of
carbon, usually as charcoal, to CO2:
SrSO4+2C→SrS+ 2CO2
This can react further:
3SrSO4+SrS→4SrO+ 4SO2
A mixture of oxide-sulfide is the result. Thus, this
type of preparation cannot be used to prepare a pure
SrS salt.
Vorbereitung Methode
Strontium sulfide, grayish-white solid (thermodynamic Ksp 500) reactive with water to form strontium hydrosulfide, Sr(SH)2, solution. Strontium hydrosulfide is formed (1) by reaction of strontium sulfide and H2O, (2) by saturation of strontium hydroxide solution with H2S. Strontium polysulfides are formed by boiling strontium hydrosulfide with sulfur.
Allgemeine Beschreibung
Gray powder with an odor of H2S in moist air.
Air & Water Reaktionen
Slowly releases H2S in moist air.
Reaktivität anzeigen
STRONTIUM SULFIDE reacts vigorously with acids to release hydrogen sulfide gas. May react exothermically with oxidizing agents including inorganic oxoacids, organic peroxides and epoxides, and inorganic peroxides to generate toxic gases.
Hazard
Moderate fire and explosion risk. Irritant to
skin and tissues.
Health Hazard
ACUTE/CHRONIC HAZARDS: Irritant to skin and tissue. Moderate fire hazard and explosion risk.
Sicherheitsprofil
Poison by inhalation and ingestion. Ready decomposes to yield H2S. Incompatible with lead(1V) oxide. When heated to decomposition it emits toxic fumes of SOx. See also SULFIDES and STRONTIUM COMPOUNDS.
Strontiumsulfid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte