3-Chlor-4-methylphenylisocyanat Chemische Eigenschaften,Einsatz,Produktion Methoden
R-Sätze Betriebsanweisung:
R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R42:Sensibilisierung durch Einatmen möglich.
S-Sätze Betriebsanweisung:
S23:Gas/Rauch/Dampf/Aerosol nicht einatmen(geeignete Bezeichnung(en) vom Hersteller anzugeben).
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn möglich, dieses Etikett vorzeigen).
Chemische Eigenschaften
Chloromethyl phenyl isocyanate is a colorless
to yellow liquid or beige, low-melting solid. Acrid odor.
Verwenden
3-Chloro-4-methylphenyl isocyanate may be used in the synthesis of the following urea compounds:
- 1-(1-(1-adamantyl)methyl)-3-(3-chloro-4-methylphenyl)urea
- 1-(3-chloro-4-methylphenyl)-3-heptylurea
- 1-(3-chloro-4-methylphenyl)-3-cyclooctylurea
- 1-(3-chloro-4-methylphenyl)-3-(3-fluorobenzyl)urea
- 1-(3-chloro-4-methylphenyl)-3-(4-phenylbutan-2-yl)urea
Allgemeine Beschreibung
A colorless liquid with an acrid odor. Denser than water. Contact may irritate skin, eyes and mucous membranes. Flash point 132°F. Toxic by ingestion, inhalation and skin absorption. Used to make other chemicals.
Air & Water Reaktionen
Flammable. 3-Chloro-4-methylphenyl isocyanate decomposes in water. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff.
Reaktivität anzeigen
Isocyanates and thioisocyanates, such as 3-Chloro-4-methylphenyl isocyanate, are incompatible with many classes of compounds, reacting exothermically to release toxic gases. Reactions with amines, aldehydes, alcohols, alkali metals, ketones, mercaptans, strong oxidizers, hydrides, phenols, and peroxides can cause vigorous releases of heat. Acids and bases initiate polymerization reactions in these materials. Some isocyanates react with water to form amines and liberate carbon dioxide. Base-catalysed reactions of isocyanates with alcohols should be carried out in inert solvents. Such reactions in the absence of solvents often occur with explosive violence, [Wischmeyer(1969)].
Health Hazard
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Contact with molten substance may cause severe burns to skin and eyes. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Brandgefahr
Combustible material: may burn but does not ignite readily. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
mögliche Exposition
This material is used in organic
synthesis.
Versand/Shipping
UN22363-Chloro-4-methylphenyl isocyanate,
liquid, Hazard Class: 6.1; Labels: 6.1-Poisonous materials.
Inkompatibilitäten
May form explosive mixture with air.
Isocyanates are highly flammable and reactive with many
compounds, even with themselves. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may
cause fires or explosions. Reaction with moist air, water or
alcohols may form amines and insoluble polyureas and
react exothermically, releasing toxic, corrosive, or flammable gases, including carbon dioxide; and, at the same time,
may generate a violent release of heat increasing the concentration of fumes in the air. Incompatible with amines,
aldehydes, alkali metals, ammonia, carboxylic acids, caprolactum, alkaline materials, glycols, ketones, mercaptans,
hydrides, organotin catalysts, phenols, strong acids, strong
bases, strong reducing agents such as hydrides, urethanes,
ureas. Elevated temperatures or contact with acids, bases,
tertiary amines, and acyl-chlorides may cause explosive
polymerization. Attacks some plastics, rubber, and coatings.
Contact with metals may evolve flammable hydrogen gas.
May accumulate static electrical charges, and may cause
ignition of its vapors. Do not store in temperatures above
30C/86F.
3-Chlor-4-methylphenylisocyanat Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
