HYDROGEN CYANIDE suppliers
HYDROGEN CYANIDE
- CAS:
- 74-90-8
- MF:
- CHN
- MW:
- 27.03
Properties
- Melting point:
- -13.4°
- Boiling point:
- bp 25.6°
- Density
- d(gas) 0.941 (air = 1); d(liq) 0.687
- vapor pressure
- 750 mmHg at 25 °C
- refractive index
- 1.2594
- solubility
- very soluble in H2O, ethanol; soluble in ethyl ether
- form
- colorless liquid
- pka
- 9.2(at 25℃)
- color
- colorless liquid or gas
- Odor
- Bitter almond odor detectable at 1 to 5 ppm; however, 20 to 60% of the population are reported to be unable to detect the odor of HCN
- Water Solubility
- miscible with H2O, alcohol; slightly soluble ether [MER06]
- Dielectric constant
- 158.0（0℃）
- Exposure limits
- Ceiling 11 mg/m3 (10 ppm) (ACGIH), 5 mg CN/m3/10 min (NIOSH); TWA air 11 mg/m3 (10 ppm) skin (OSHA); IDLH 50 ppm.
- LogP
- -0.250
Safety Information
- Symbol(GHS)
GHS06,GHS09
- Signal word
- Danger
- Hazard statements
- H300-H310-H330-H410
- Precautionary statements
- P264-P270-P301+P310-P321-P330-P405-P501-P262-P264-P270-P280-P302+P350-P310-P322-P361-P363-P405-P501-P260-P271-P284-P304+P340-P310-P320-P403+P233-P405-P501-P273-P391-P501
- Hazard Codes
- F+,T+,N
- Risk Statements
- 12-26-50/53-26/27/28
- Safety Statements
- 7/9-16-36/37-38-45-60-61
- RIDADR
- 1051
- Autoignition Temperature
- 538 °C
- HazardClass
- 6.1(a)
- PackingGroup
- I
- Toxicity
- LC50 in rats, mice, dogs: 544 ppm (5 min), 169 ppm (30 min), 300 ppm (3 min) by inhalation, K. C. Back et al., Reclassification of Materials Listed as Transportation Health Hazards (TSA-20-72-3; PB214-270, 1972)
- IDLA
- 50 ppm
Use
This particular record contains hydrogen cyanide dissolved in water. Hydrogen cyanide is a very volatile liquid or colorless gas smelling of bitter almonds, b.p. 26° C. A deadly human poison by all routes. The gas (hydrogen cyanide) forms explosive mixtures with air, HYDROGEN CYANIDE reacts violently with acetaldehyde. HYDROGEN CYANIDE is a severe explosion hazard when heated or exposed to oxidizers. HYDROGEN CYANIDE may polymerize explosively at elevated temperature (50-60° C) or in the presence of traces of alkali [Wohler, L. et al., Chem. Ztg., 1926, 50, p. 761, 781]. In the absence of a stabilizer (e.g., phosphoric acid) HYDROGEN CYANIDE may undergo explosively rapid spontaneous (autocatalytic) polymerization leading to a fire. The reaction is autocatalytic because of ammonia formation. The anhydrous acid should be stabilized by the addition of acid. [Bond, J., Loss Prev. Bull., 1991, 101, p.3]. During the preparation of imidoester hydrochlorides, hydrogen chloride was rapidly passed over alcoholic hydrogen cyanide. An explosion ensued, even with cooling of the process, [J. Org. Chem., 1955, 20, 1573].
According to relevant laws, regulations, policies and the provisions of this website, this website does not display the product information!
The source is "剧毒、有毒、易致癌化学品". If the information is inaccurate, please contact the platform to modify it.
contact information：info@chemicalbook.com 400-158-660