| Identification | Back Directory | [Name]
Poly(styrene-co-acrylonitrile) | [CAS]
9003-54-7 | [Synonyms]
fn20
fn25
sn20
sn25
snp2
sn20a
sn20p
tyril
san-c
litac
luran
kostil
dialux
as61cl
sanrex
sanrexc
rmd4500
polysan
dikaril
ceviann
lustran
cevianhl
ceviannf
lorkaril
lustrana
tyril760
tyril767
tyril780
tyril783
tyril790
tyril860
tyril867
AS resin
tyrilfoam
piccoflex
rexene106
ronfalins
kostil235
lustran28
luran368r
luran378p
acrilafil
kralac1155
litacc100p
lna21-1000
denkaas-cy
estyreneas
sahrekkusu
sepiann050
sanrexsanc
lustransan
lustrana2l
trolitulan
trolitulen
SAN resins
sanrexsan-h
lustranlna2l
lustrana2121
thermocompbf
terulankp2540
terulankr2540
sepiann6000hl
bakelitermd4511
kostilan(atx)2010
acrylonitrile-styreneresin
acrylonitrile-styreneresins
POLY(STYRENE/ACRYLONITRILE)
styren-acrylonitrilepolymer
acrylonitrile-styrenepolymer
Styrene-acrylonitrile resins
ACRYLONITRILE-STYRENEPOLYMERS
Resins, acrylonitrile/styrene
acrylonitrilestyrenecopolymer
acrylonitrile-styrenecopolymer
POLY(STYRENE-CO-ACRYLONITRILE)
STYRENE/ACRYLONITRILE COPOLYMER
acrylonitrile,polymerwithstyrene
Styrene-Acrylonitrile Copolymers
ACRYLONITRILE-STYRENE COPOLYMER RESIN
POLY(STYRENE-COPOLYMER-ACRYLONITRILE)
2-propenenitrilepolymerwithethenylbenzene
2-Propenenitrile,polymerwithethenylbenzene
poly(styrene-co-acrylonitrile)30wt.%acrylonitrileavemwca.185,000(gpc)
POLY(STYRENE-CO-ACRYLONITRILE), 30 WT. % ACRYLONITRILE, AVE MW CA. 185,000(G
POLY(STYRENE-CO-ACRYLONITRILE), 25 WT. % ACRYLONITRILE, AVE MW CA. 165,000(G
Poly(styrene-co-acrylonitrile), average M.W. 165,000 by GPC, acrylonitrile 25 wt.%
Poly(styrene-co-acrylonitrile), 25 wt.% acrylonitrile, average MW ca. 165000 (GPC)
Poly(styrene-co-acrylonitrile) average Mw ~185,000 by GPC, acrylonitrile 30 wt. %, powder
Poly(styrene-co-acrylonitrile) average Mw ~165,000 by GPC, acrylonitrile 25 wt. %, pellets | [Molecular Formula]
C33H33N3X2 | [MDL Number]
MFCD00134009 | [MOL File]
9003-54-7.mol | [Molecular Weight]
471.64 |
| Hazard Information | Back Directory | [Chemical Properties]
clear white pellets | [Uses]
A large quantity of this copolymer is extruded as a thin tubing which is biaxally stretched by inflating with air at moderate temperatures before slitting. This product, called Saran Wrap, has a tensile strength of 15,000 psi (103 MPa). Since it has a high degree of transparency to light and a high coefficient of static friction (0.95) it is widely used for the protection of foods in the household. It has a low permeability value for gases such as oxygen and nitrogen.
Poly(vinylidene chloride-co-acrylonitrile) is widely used as a latex coating for cellophane, polyethylene and paper. Since this copolymer is soluble in organic solvents, it is also used as a solution coating. The resistance to vapor permeability and the ease of printing on polyethylene and cellophane is increased by coating with this vinylidene chloride copolymer.
The tensile strength of both film and fiber is increased tremendously by cold drawing 400–500 per cent. Thus, tensile strengths as high as 40,000 psi (276 MPa) in the direction of draw have been obtained by cold drawing. | [Definition]
ChEBI: Styrene-acrylonitrile copolymer is a polymer. | [Production Methods]
POLYVINYLIDENE CHLORIDE.. A stereoregular, thermoplastic polymer is produced by the free-radical chain polymerization of vinylidene chloride (H2C=CCl2) using suspension or emulsion techniques. The monomer has a bp of 31.6 °C and was first synthesized in 1838 by Regnault, who dehydrochlorinated 1,1,2-trichloroethane which he obtained by the chlorination of ethylene. The copolymer product has been produced under various names, including Saran. Since this monomer readily forms an explosive peroxide, it must be kept under a nitrogen atmosphere at ?10 °C in the absence of sunlight.
The copolymers were patented by Wiley, Scott, and Seymour in the early 1940s. A typical formulation for emulsion copolymerization contains vinylidene (85 g), vinyl chloride (15 g), methylhydroxypropylcellulose (0.05 g), lauroyl peroxide (0.3 g) and water (200 g). More than 95 per cent of these monomers are converted to copolymer when this aqueous suspension is agitated in an oxygen-free atmosphere for 40 hrs at 60 °C. The glass transition temperature of the homopolymer is ?17 °C. It has a specific gravity of 1.875 and a solubility parameter of 9.8. |
| Safety Data | Back Directory | [Hazard Codes ]
Xn | [Risk Statements ]
22 | [Safety Statements ]
9-61-53-45-16-24/25 | [WGK Germany ]
3
| [RTECS ]
AT6978000
| [HS Code ]
39032000 | [Safety Profile]
Moderately to hghly toxic by ingestion. Questionable carcinogenSee also NITRILES. When heated to decomposition it emits toxic fumes of NOX, and CN-. | [Toxicity]
LD50 oral in rat: 1800mg/kg |
|
|