Dibutylether Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT.
PHYSIKALISCHE GEFAHREN
Fließen, Schütten o.ä. kann zu elektrostatischer Aufladung führen.
CHEMISCHE GEFAHREN
Bildung explosionsfähiger Peroxide, besonders im wasserfreien Zustand. Reagiert mit Oxidationsmitteln. Reagiert sehr heftig mit Stickstofftrichlorid (NCl3).
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt (ACGIH 2005).
MAK nicht festgelegt (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den Körper durch Inhalation der Dämpfe.
INHALATIONSGEFAHREN
Nur ungenügende Angaben vorhanden über die Geschwindigkeit, mit der eine gesundheitsschädliche Konzentration in der Luft beim Verdampfen bei 20°C erreicht wird.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz reizt die Augen, die Haut und die Atemwege. Möglich sind Auswirkungen auf Zentralnervensystem und Leber.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Die Flüssigkeit entfettet die Haut.
LECKAGE
Ausgelaufene Flüssigkeit möglichst in abdichtbaren Behältern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. Persönliche Schutzausrüstung: Atemschutzgerät, A/P2-Filter für organische Dämpfe und schädlichen Staub.
R-Sätze Betriebsanweisung:
R10:Entzündlich.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R52/53:Schädlich für Wasserorganismen, kann in Gewässern längerfristig schädliche Wirkungen haben.
S-Sätze Betriebsanweisung:
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
Aussehen Eigenschaften
C8H18O; Butylether, Di-n-butylether. Farblose Flüssigkeit mit chrakteristischem Geruch.
Gefahren für Mensch und Umwelt
Reizt die Atmungsorgane, Augen und die Haut.
Nach Einatmen Atemnot oder Narkose. Kann zu Leber- und Nierenschäden führen.
Gefährliche Zersetzungsprodukte sind Peroxide.
Entzündlich.
LD
50 (oral, Ratte): 7400 mg/kg
Schutzmaßnahmen und Verhaltensregeln
Geeignete Schutzhandschuhe als kurzzeitiger Spritzschutz.
Verhalten im Gefahrfall
Mit flüssigkeitsbindendem Material, z.B. Rench Rapid aufnehmen. Der Entsorgung zuführen. Nachreinigen.
Kohlendioxid, Wasser, Schaum, Pulver.
Brennbar. Dämpfe schwerer als Luft. Mit Luft Bildung explosionsfähiger Gemische möglich.
Erste Hilfe
Nach Hautkontakt: Mit reichlich Wasser abwaschen.
Nach Augenkontakt: Mit reichlich Wasser bei geöffnetem Lidspalt mindestens 10 Minuten ausspülen. Augenarzt hinzuziehen.
Nach Einatmen: Frischluft.
Nach Verschlucken: Reichlich Wasser trinken lassen. Erbrechen auslösen. Arzt hinzuziehen.
Nach Kleidungskontakt: Kontaminierte Kleidung entfernen.
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
Als halogenfreie, organische Lösemittelabfälle.
Beschreibung
Butyl ether (dibutyl ether) is a colorless, stable liquid, with a mild ether-like odor. It is immiscible with water, with a specific gravity of 0.8, which is lighter than water. Butyl ether is a moderate fire risk and will form explosive peroxides on aging. Flammable range is 1.5%–7.6% in air, with a boiling point of 286°F (141°C) and a flash point of 77°F (25°C). Ignition temperature is 382°F (194°C), and the vapor density is 4.5, which is heavier than air. In addition to flammability, butyl ether is toxic on prolonged inhalation. The four-digit UN identification number is 1149. The NFPA 704 designation is health 2, flammability 3, and reactivity 1. The primary use is as a solvent.
Chemische Eigenschaften
Di-n-butyl ether is colourless liquid with ether-like odour
Verwenden
Di-n-butyl ether is used as a solvent for Grignard, Witting and alkyl lithium reactions. It is also used as a solvent for oils and fats and some natural and synthetic resins. It is considered as a replacement for terathydofuran in organic synthesis due to its less water and peroxide and high boiling point. In the pharmaceutical industry, it is used in the manufacturing process of active pharmaceutical ingredient such as procarbazine and cefaclor. In addition to this, it is used as an important solvent for the application of the coating.
Allgemeine Beschreibung
Di-n-butyl ether is a clear colorless liquid with an ethereal odor. Flash point below 141°F. Less dense than water and insoluble in water. Vapors heavier than air. Irritates the eyes, nose, throat, and respiratory tract.
Air & Water Reaktionen
Highly flammable. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick 1979 p.151-154, 164]. A mixture of liquid air and diethyl ether exploded spontaneously [MCA Case History 616 1960]. Insoluble in water.
Reaktivität anzeigen
Ethers, such as BUTYL ETHER can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.
Hazard
Toxic on prolonged inhalation. Flammable,
moderate fire risk. May form explosive peroxides,
especially in anhydrous form.
Health Hazard
Inhalation causes irritation of nose and throat. Liquid irritates eyes and may irritate skin on prolonged contact. Ingestion causes irritation of mouth and stomach.
Brandgefahr
Behavior in Fire: Vapor is heavier than air and may travel a considerable distance to a source of ignition and flash back.
Chemische Reaktivität
Reactivity with Water No reaction; Reactivity with Common Materials: No reaction; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.
Industrielle Verwendung
n-Butyl ether is used in
synthesis reactions that require an anhydrous, inert solvent. This ether is a valuable
extraction solvent for aqueous solutions because of its low water solubility. n-Butyl
ether when mixed with ethanol or butanol is an excellent solvent for ethyl cellulose.
Sicherheitsprofil
Mildly toxic by
inhalation, ingestion, and skin contact.
Human systemic effects by inhalation:
conjunctiva irritation and unspecified nasal
effects. An experimental skin and human
eye irritant. See also ETHERS. Dangerous
fire hazard when exposed to heat, flame, oroxidizers. Incompatible with NCL and
oxidizing materials. To fight fire, use alcohol
foam, dry chemical. When heated to
decomposition it emits acrid smoke and
fumes.
mögliche Exposition
Di-n-butyl ether is used as a solvent for hydrocarbons, fatty materials; extracting agent in used metals separation; solvent purification, making other chemicals. Incompatibilities: May form explosive mixture with air. May accumulate static electrical charges, and may cause ignition of its vapors. Incompatible with strong acids; oxidizers. Contact with air or light may form unstable and explosive peroxides, especially anhydrous form.
Environmental Fate
Butyl ether has the ability to dissolve lipids. As a result, it
causes irritation and pain on contact with the eyes and nasal
mucosa. It also causes dermal irritation and dermatitis on
contact with the skin. Damage caused by butyl ether appears
to be scattered loss of epithelial cells due to solution of
phospholipid cell membranes. At the central nervous system
(CNS) level, butyl ether, like other volatile organic solvents,
depresses the CNS by dissolving in the lipid membrane of the
cells and disrupting the lipid matrix. These effects are known
as membrane fluidization. At the molecular level, membrane
fluidization disrupts solute gradient homeostasis, which is
essential for cell function.
Versand/Shipping
UN1149 Butyl ethers & Dibutyl ethers, Hazard
Class: 3; Labels: 3—Flammable liquid
läuterung methode
Peroxides (detected by the liberation of iodine from weakly acid HCl solutions of 2% KI) can be removed by shaking 1L of ether with 5-10mL of a solution comprising of 6.0g of ferrous sulfate and 6mL conc H2SO4 and 110mL of water, with aqueous Na2SO3, or with acidified NaI, water, then aqueous Na2S2O3. After washing with dilute NaOH, KOH, or Na2CO3, then water, the ether is dried with CaCl2 and distilled. It can be further dried by distillation from CaH2 or Na (after drying with P2O5), and stored in the dark with Na or NaH. The ether can also be purified by treating with CS2 and NaOH, expelling the excess sulfide by heating. The ether is then washed with water, dried with NaOH and distilled [Kusama & Koike J Chem Soc Jpn, Pure Chem Sect 72 229 1951]. Other purification procedures include passage through an activated alumina column to remove peroxides, or through a column of silica gel, and distillation after adding about 3% (v/v) of a 1M solution of MeMgI in n-butyl ether. [Beilstein 1 IV 1520.]
Waste disposal
Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal,
state, and local environmental regulations must be
observed.
Dibutylether Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
