ヘキサメチレンジイソシアナート 化学特性,用途語,生産方法
外観
無色～わずかにうすい黄色, 澄明の液体
定義
本品は、次の化学式で表される有機化合物である。
溶解性
エタノール及びアセトンに極めて溶けやすく、水で分解する。
解説
ヘキサメチレンジイソシアナート,刺激臭を有する無色の液体．融点－67 ℃，沸点140～142 ℃(2.8 kPa)．n20D1.453．d204 1.047．引火点130 ℃．水と加熱するとポリヘキサメチレン尿素を，濃塩酸と加熱するとヘキサメチレンジアミンになる．ポリウレタンの製造原料，繊維処理剤として用いられる．
森北出版「化学辞典（第2版）
用途
有機合成原料。
用途
塗料、接着剤、コーティング加工用樹脂の原料
製造
ヘキサメチレンジイソシアナートヘキサメチレンジアミンにホスゲンを作用させるか，スベリン酸ジアジドのクルチウス転位によってつくる．
毒性
眼を刺激する．LD50 710 mg/kg(ラット，経口)．
主な用途／役割
ポリウレタン樹脂、ポリウレタンプレポリマー等の原料、水性高分子イソシアネート系接着剤の架橋剤として使用される。
説明
This diisocyanate compound is used in the manufacture
of various polyurethane products: elastic and rigid
foams, paints, lacquers, adhesives, bin ding agents,
synthetic rubbers, and elastomeric fibers.
化学的特性
Hexamethylene diisocyanate is a colorless
liquid. Sharp, irritating odor.
使用
Hexamethylene diisocyanate (HDI) is one of the most common aliphatic disocyanates, It is a monomer used in the production of polyurethane foams and exceptionally high-quality coatings, and is found in some industrial paints and spray painting operations. It is a compound which reacts readily with water and alcohols (Von Burg 1993). It has a vapor pressure of 0.05 mm Hg at room temperature, but can be present in aerosol form allowing a potentially higher exposure to individuals. The HDI-BT trimer is often present for similar industrial uses. It would be expected to have a lower vapor pressure; however, the aerosol form can also be present, allowing potentially higher exposure of HDI-BT to individuals. Hexamethylene diisocyanate reacts slowly with water to form carbon dioxide (HSDB 1996). The base-catalyzed reaction of Hexamethylene diisocyanate with alcohols should be carried out in inert solvents; the reaction may occur with explosive violence in the absence of solvents (NFPA 1994).
定義
ChEBI: A diisocyanate compound with the two isocyanates linked by a hexane-1,6-diyl group.
製造方法
Hexamethylene diisocyanate (HDI) is prepared by the phosgenation of hexamethylenediamine (section lO.2.2(b)):
H2N-(CH2)6-NH2--COCl2-->OCN-(CH2)6-NCO
Hexamethylene diisocyanate is a liquid with a volatility of the same order as that of tolylene diisocyanate. It is respiratory irritant and also has powerful effects on the skin and eyes. Hexamethylene diisocyanate was one of the first diisocyanates utilized for making polyurethanes, being used to prepare fibres and moulding compounds. These applications are no longer of importance but hexamethylene diisocyanate now finds use mainly in coatings which are more light stable than those based on aromatic isocyanates.
主な応用
Hexamethylene diisocyanate is an aliphatic diisocyanate monomer typically used to produce oligomers and prepolymers that when combined with a polyol produce light-stable polyurethane.
Highly reactive 1,6-hexamethylene diisocyanate (HMDI) was used to synthesize lactic acid polymers from oligomers by the addition of 2,2′-bis(2-oxazoline) (BOX) as chain extenders. Self-healing ability was rendered to polyurethane elastomer by synthesizing alkoxyamine-based diol and reacting it with tri-functional homopolymer of HMDI and polyethylene glycol (PEG). Plastic optical fiber (POF) was prepared by the bulk homopolymerization of HMDI catalyzed by Tin(II)-2 ethylhexanoate (SnOct).
一般的な説明
A colorless crystalline solid. Toxic by ingestion and is strongly irritating to skin and eyes. 1,6-Diisocyanatohexane is used to make nylon.
空気と水の反応
Contact with moisture or temperatures over 399°F may cause polymerization. Soluble in water.
反応プロフィール
1,6-Diisocyanatohexane reacts with water. Base-catalyzed reactions of 1,6-Diisocyanatohexane with alcohols may be explosively violent in the absence of diluting solvents. 1,6-Diisocyanatohexane is incompatible with strong bases, amines, acids and strong oxidizers. 1,6-Diisocyanatohexane is also incompatible with metal compounds and surface active materials. .
危険性
Combustible.
健康ハザード
HDI is moderately toxic by inhalation. Inhumans the acute toxic symptoms could bewheezing, dyspnea, sweating, coughing, dif-ficulty in breathing, and insomnia. In addition, this compound can produce irritationof the skin, eyes, nose, and respiratory tract.Chronic exposure may cause obstruction ofairways and asthma.
The lethal concentration for rats frominhalation of this compound for 4 hourswas 60 mg/m3. The oral toxicity of thiscompound was found to be low in testanimals. The toxicity order was much higherwhen given intravenously.
LD50 value, oral (mice): 350 mg/kg
LD50 value, intravenous (mice): 5.6 mg/kg
There is no report of any carcinogenic orteratogenic study for this compound.
火災危険
Combustible material: may burn but does not ignite readily. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
接触アレルゲン
This diisocyanate compound is used in the manufac ture of various polyurethane products: elastic and
rigid foams, paints, lacquers, adhesives, binding
agents, synthetics rubbers, and elastomer fibers.
安全性プロファイル
Poison by inhalation
and intravenous routes. Moderately toxic by
ingestion and skin contact. Potentially
explosive reaction with alcohols + base.
When heated to decomposition it emits
toxic fumes of NOx. See also CYANATES.
職業ばく露
Used to make other chemicals, coat ings, and polyurethane. It is also used as a hardener in
automobile and airplane paints.
環境運命予測
HDI is not readily soluble (low mg l
-1 range) in water.
However, upon contact with water, reactivity is rapid with
a half-life of 0.23 h at 23 ℃. This nonhomogeneous reaction is
expected to produce principally polyureas. In the occupational
environment, an aerosol can be formed by nebulization;
however, with a vapor pressure of 0.007 hPa, HDI is expected
to exist in the ambient atmosphere in its vapor state. As a vapor,
HDI is expected to degrade in the atmosphere by reaction with
hydroxyl radicals (half-life approximately 2 days). In direct
contact with water, its rapid hydrolysis reduces the likelihood
for HDI to bioaccumulate in the aquatic compartment or
transfer to groundwater. Therefore, the rapid hydrolysis in an
aquatic environment and relatively rapid degradation in
atmosphere limits the ability of this substance to be bioaccumulative
or persistent.
輸送方法
UN2281 Hexamethylene diisocyanate, Hazard
Class: 6.1; Labels: 6.1-Poisonous materials.
不和合性
May form explosive mixture with air.
Isocyanates are highly flammable and reactive with many
compounds, even with themselves. Incompatible with oxi dizers (chlorates, nitrates, peroxides, permanganates, per chlorates, chlorine, bromine, fluorine, etc.); contact may
cause fires or explosions. Reaction with moist air, water or
alcohols may form amines and insoluble polyureas and
react exothermically, releasing toxic, corrosive or flamma ble gases, including carbon dioxide; and, at the same time,
may generate a violent release of heat increasing the con centration of fumes in the air. Incompatible with amines,
aldehydes, alkali metals, ammonia, carboxylic acids, capro lactum, alkaline materials, glycols, ketones, mercaptans,
hydrides, organotin catalysts, phenols, strong acids, strong
bases, strong reducing agents such as hydrides, urethanes,
ureas. Elevated temperatures or contact with acids, bases,
tertiary amines, and acyl-chlorides may cause explosive
polymerization. Attacks some plastics, rubber and coatings.
Contact with metals may evolve flammable hydrogen gas.
May accumulate static electrical charges, and may cause
ignition of its vapors. Temperatures above 200℃ can cause
polymerization. Attacks copper.
廃棄物の処理
Disposal is by chemical incineration of HDIsolution in a combustible solvent.
ヘキサメチレンジイソシアナート 上流と下流の製品情報
原材料
準備製品