ポリアクリル酸ナトリウム 化学特性,用途語,生産方法
外観
無色〜わずかにうすい黄色, 澄明の液体
定義
本品は、ポリアクリル酸(*)のナトリウム塩である。参照表示名称:ポリアクリル酸
溶解性
水に溶ける。ポリアクリル酸Naは、吸湿性が極めて強く、水を加えると徐々に膨潤し、透明なゲルを経て均一な粘稠溶液となります。
歴史
国内において1980年頃までは布おむつの使用がほとんどでしたが、1983年に日本触媒によって上市された高吸水性かつ安価なポリマーであるポリアクリル酸ナトリウムが紙おむつの原料として用いられるようになったことで、国内市場において紙おむつの普及が進み、同時に紙おむつの普及が進んでいた欧米市場でも高吸水性ポリマーの使用が増えていった経緯があり、紙おむつ普及のきっかけとなった原料として知られています。
また、現在は紙おむつの用途にとどまらず、農園芸のための保水剤、食品保冷剤、ペット用吸尿剤などをはじめ、医薬品や食品、化粧品など幅広く用いられています。
用途
ポリアクリル酸Naの化粧品以外の主な用途としては
食品 増粘安定剤や品質改良剤として食品に用いられています。
医薬品 賦形、湿潤調整、粘稠、粘着・粘着増強、基剤目的の医薬品添加剤として経口剤、外用剤、歯科外用剤および口中用剤などに用いられています。
用途
増粘剤、凝集剤(沈降促進剤)、バインダー。
用途
増粘剤、凝集剤(清澄剤)。
化粧品の成分用途
エモリエント剤、ヘアスタイリング剤、皮膜形成剤、親水性増粘剤、乳化安定剤、吸着剤
主な用途/役割
ユリア樹脂系接着剤、メラミン樹脂系接着剤、エマルション系接着剤の増粘剤として使用される。
使用上の注意
吸湿性が強い
説明
Sodium polyacrylate, also known as waterlock, is a sodium salt of poly acrylic acid with the chemical formula [-CH
2-CH(COONa)-]
n and broad application in consumer products. It has the ability to absorb as much as 200 to 300 times its mass in water. Sodium polyacrylate is anionic polyelectrolytes with negatively charged carboxylic groups in the main chain. While sodium neutralized poly acrylic acids are the most common form used in industry, there are also other salts available including potassium, lithium and ammonium.
化学的特性
faintly grey crystalline solid
使用
sodium polyacrylate is a suspending agent, stabilizer, and emulsifier.
定義
ChEBI: An organic sodium salt which is a macromolecule composed of repeating sodium acrylate units.
主な応用
Sodium poly acrylate and other derivatives of polyacrylic acid have a wide variety of commercial and industrial uses that include:
Sequestering agents in detergents. ( By binding hard water elements such as calcium and magnesium, the surfactants in detergents work more efficiently.).
一般的な説明
Poly(acrylic acid sodium salt) is a hydrophilic polymer, which can find wide applications in the production of consumer productslike diapers, because of its ability to absorb many more times its mass in water.
化学性质
アクアマテリアルの成分
安全性プロファイル
An eye irritant. When heated to decomposition it emits toxic fumes of Na2O.
純化方法
Commercial polyacrylamide is first neutralised with an aqueous solution of NaOH, and the polymer is precipitated with acetone. The precipitate is redissolved in a small amount of water and freeze-dried. The polymer is then repeatedly washed with EtOH and water to remove traces of low-molecular-weight material, and finally dried in vacuum at 60o [Vink J Chem Soc, Faraday Trans 1 75 1207 1979]. It has also been dialysed overnight against distilled water, then freeze-dried. Sodium poly( -L-glutamate). Wash it with acetone, dry it in a vacuum, dissolve it in water and precipitate it with isopropanol at 5o. Impurities and low-molecular-weight fractions are removed by dialysis of the aqueous solution for 50hours, followed by ultrafiltration
ポリアクリル酸ナトリウム 上流と下流の製品情報
原材料
準備製品