Sucrose Benzoate

Item

Specification

Appearance

Colorless to yellowish glassy solid

or white powder

Acidity (as benzoic acid)

≤0.3%

Nephelometric analysis

≥85%

Color

≤60APHA

Specifications

Uses

SB->6

Sucrose benzoate which substituted number is more than 6 widely used in many areas, such as, As plasticizer for solid ink or paint. As carrier for liquid ink pigment, it can can prevent elution and to improve the ink viscosity, water solubility, dispersion and emulsification degree especially on hot printing ink. As indispensable composition to improve the thermal stability of record medium for magnetic thermal and thermal transfer process. As mainly added components to cosmetics (nail polish, rouge, lipstick, skin care and hair care), it can improve brightness, film, adhesive, waterproof, wear resistance and hardness and lower shrinkage and viscosity of nail polish film ect.. As curing agent for soldering flux residue. As brightener for aerosol paint. As modifier for elastic nylon poly (amino-12-β- ethyleneoxide) that is application to textile, medicine, and building materials. As plasticizer for breathable films of personal health and baby disposable diapers products. In addition, due to 6substituted sucrose benzoate have very good compatibility with many organic compounds and polymer, such as methyl acrylic acid ester, acetic acid, butyric acid fiber, nitrocellulose, sulfonated pluralistic ester, polyhydroxy esters polyvinyl butyral, polyvinyl chloride, aryl sulfonated formaldehyde resin, and so on, therefore, it is widely used in the above resin and polymer as modifier, plasticizer, binder, tackifier and dispersant. In the pharmaceutical industry used as coating of drugs along with shellac.

SB->7

added to the toner of electrostatic spraying can speed up the toner fusion, improve the adhesion between ink and paper, then produce clear images.

SB-8

carrier of pesticide active ingredients and aversion.

melt point °C

83-88

used as non-polymeric organic host for photosensitive recording medium in volume phase holograms.

88

used as barrier layer for optical recording medium to prevent them from mechanical and heat damage while it’s hydroxyl group been replace by benzoyl more than six.

93-100

used as porogen for nanoporous siloxane films.

softening temperature °C

90-93

used as electrical insulating hardenable-softenable thermoplastics for organic photosensitive particles of duplicatingmachine and laserprinter.

95-98

used as tackifier for some adhesive,

98

used as plasticizer for thermosetting powder coating and thermal printing toner.