ChemicalBook >>Dithiobiuret>>Dithiobiuret(541-53-7)

Dithiobiuret(541-53-7)

Dithiobiuret(541-53-7)
Product IdentificationBack to Contents
【Product Name】

Dithiobiuret
【Synonyms】

Carbamothioylthiourea
Dihydrothiuret
Imidodicarbonimidothioic diamide
Thioimidodicarbonic diamide
【CAS】

541-53-7
【Formula】

C2H5N3S2
【Molecular Weight】

135.21
【EINECS】

208-784-8
【RTECS】

EC1575000
【RTECS Class】

Other
【Merck】

13,3407
【Beilstein/Gmelin】

1756621
【Beilstein Reference】

4-03-00-00356
Physical and Chemical PropertiesBack to Contents
【Appearance】

Crystalline solid.
【Solubility in water】

Very soluble
【Melting Point】

189 - 190
【Density】

1.522 g/cm3 (20 C)
【pKa/pKb】

11.15 (pKa)
【Usage】

Plasticizer, rubber accelerator, intermediate in resin mfr, in making insecticides & rodenticides, can be used to delay wilting of flowers. Reagent for the photometric determination of mo(vi).
First Aid MeasuresBack to Contents
【Ingestion】

Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual on the left side with the head down. Contact a physician, medical facility, or poison control center for advice about whether to induce vomiting. If possible, do not leave individual unattended.
【Inhalation】

If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.
【Skin】

Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists. Treatment should include recommendations listed in the oral exposure section when appropriate.
【Eyes】

Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.
Handling and StorageBack to Contents
【Storage】

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
【Handling】

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards IdentificationBack to Contents
【Ingestion】

Watery diarrhea occurs in experimental animals and leads to fluid losses and dehydration.
【Inhalation】

Respiratory failure has been described in exposed experimental animals. This effect has not been described in exposed humans.
【Hazards】

When heated to decomposition, it emits highly toxic fumes of oxides of sulfur and nitrogen.
【EC Risk Phrase】

R 28
【EC Safety Phrase】

S 28 36/37 45
【UN (DOT)】

2811
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
【Respirators】

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
【Poison Class】

2
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

(Non-Specific -- Dithiocarbamate Pesticide, Solid, n.o.s.) Wear boots, protective gloves, goggles and self-contained breathing apparatus.(Non-Specific -- Dithiocarbamate Pesticide, Solid, n.o.s.) Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Use alcohol foam, carbon dioxide or dry chemical.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

(Non-Specific -- Dithiocarbamate Pesticide, Solid, n.o.s.) Keep sparks, flames and other sources of ignition away. Keep material out of water sources and sewers. Avoid breathing dusts and fumes from burning material. Keep upwind; avoid bodily contact with the material. Do not handle broken packages without protective equipment. Wash away any material which may have contacted the body with copious amounts of water or soap and water.
Stability and ReactivityBack to Contents
【Incompatibilities】

May react with acids and reducing agents to form toxic hydrogen sulfide gas Organic amides/imides react with azo and diazo compounds to generate toxic gases.
【Stability】

No data.
Transport InformationBack to Contents
【UN Number】

2811
Company Name: Hubei Kemedi Chemical Co., LTD
Tel: 18372743325
Fax:
WebSite: www.chemicalbook.com/ShowSupplierProductsList1115284/0.htm
Company Name: Jilin Chinese Academy of Sciences - Yanshen Technology Co., Ltd
Tel: 0431-80514535 19917294565
Fax:
WebSite: www.chemextension.com
Company Name: HUBEI CHANGYAO BIOTECHNOLOGY CO LTD
Tel: 17683887209
Fax:
WebSite: www.chemicalbook.com/supplier/25747346/
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Enantiotech Corporation Ltd
Tel: 760-85282375 13212762451
Fax:
WebSite: www.enantiotech.com/