ChemicalBook >>Aluminum diacetate hydroxide>>Aluminum hydroxide acetate(142-03-0)

Aluminum hydroxide acetate(142-03-0)

Aluminum hydroxide acetate(142-03-0)
Product IdentificationBack to Contents
【Product Name】

Aluminum hydroxide acetate
【Synonyms】

Aluminum hydroxydiacetate
Aluminum subacetate
Bis(acetato-O)hydroxyaluminium
Hydrosal
Hydroxyaluminum acetate
Lenicet
【CAS】

142-03-0
【Formula】

C4H7AlO5
【Molecular Weight】

162.08000000000001
【EINECS】

205-518-2
【Merck】

12,349
Physical and Chemical PropertiesBack to Contents
【Appearance】

White powder with faint acetic acid odor.
【Melting Point】

54
【Density】

1.045 g/cm3
【Usage】

Production of color lakes.
First Aid MeasuresBack to Contents
【Ingestion】

Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
【Inhalation】

Remove to fresh air. Get medical attention for any breathing difficulty
【Skin】

Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
【Eyes】

Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
Handling and StorageBack to Contents
【Storage】

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Hazards IdentificationBack to Contents
【Ingestion】

Extremely large oral dosages may produce gastrointestinal disturbances.
【Inhalation】

Hazard is principally that of a nuisance dust. Coughing or shortness of breath may occur in cases of excessive inhalation.
【Skin】

May cause irritation with redness and pain.
【Eyes】

No adverse effects expected but dust may cause mechanical irritation.
【Hazards】

Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Exposure Controls/Personal ProtectionBack to Contents
【Personal Protection】

Wear protective gloves and clean body-covering clothing. Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
【Respirators】

If the exposure limit is exceeded, a half-face dust/mist respirator may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece dust/mist respirator may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
【Exposure limit(s)】

OSHA Permissible Exposure Limit (PEL) - alpha alumina (aluminum oxide): 15 mg/m3 total dust, 5 mg/m3 respirable fraction.
Fire Fighting MeasuresBack to Contents
【Fire Fighting】

Use any means suitable for extinguishing surrounding fire. In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
【Fire Potential】

Not considered to be a fire hazard.
Accidental Release MeasuresBack to Contents
【Small spills/leaks】

Ventilate area of leak or spill. Wear appropriate personal protective equipment. Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
Stability and ReactivityBack to Contents
【Incompatibilities】

Chlorine trifluoride, Ethylene oxide.
【Stability】

Stable under ordinary conditions of use and storage.
【Decomposition】

Carbon dioxide and carbon monoxide may form when heated to decomposition.
Company Name: J & K SCIENTIFIC LTD.
Tel: 010-82848833 400-666-7788
Fax: 86-10-82849933
WebSite: http://www.jkchemical.com
Company Name: Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel: 4006608290; 18621169109
Fax: 86-21-61259102
WebSite: https://www.meryer.com/cn/index/
Company Name: Alfa Aesar
Tel: 400-6106006
Fax: 021-67582001/03/05
WebSite: http://chemicals.thermofisher.cn
Company Name: Energy Chemical
Tel: 021-021-58432009 400-005-6266
Fax: 021-58436166
WebSite: http://www.energy-chemical.com
Company Name: Shandong Xiya Chemical Co., Ltd
Tel: 13355009207 13355009207
Fax: 0539-6365991
WebSite: www.xiyashiji.com
Company Name: BEST-REAGENT
Tel: 400-1166-196 18981987031
Fax: 028-84555506 800101999
WebSite: http://www.hx-r.com/
Company Name: Sinopharm Chemical Reagent Co,Ltd.
Tel: 86-21-63210123
Fax: 86-21-63290778 86-21-63218885
WebSite: www.reagent.com.cn
Company Name: Hangzhou Yuhao Chemical Technology Co., Ltd
Tel: 0571-82693216
Fax: +86-571-82880190
WebSite: www.chemyuhao.com